HAMPTON BAY GENEVA 6PK FRS60786-STBC User manual

THANK YOU
USE AND CARE GUIDE
GENEVA 6PK DINING CHAIR - BARE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # 1005 443 240
Model # FRS60786-STBC
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this set. We strive continually to create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!

2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
WARNING: THIS SET WAS MADE FOR THE EXPLICIT PURPOSE OF PROVIDING OUTDOOR FUNCTIONS AND IS NOT TO BE USED AS A TOY.
THIS PRODUCT IS INTENDED FOR NORMAL OUTDOOR USE; HOWEVER, THE MANUFACTURER RECOMMENDS STORING AND/OR COVERING THIS
PRODUCT WHEN ANY FORMIDABLE/SEVERE WEATHER IS APPROACHING.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by
or near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
3. Do not move the set while it is occupied. Failure
to obey this caution could result in injury.
WARNING: DO NOT LOCATE THIS PRODUCT NEAR OPEN FLAMES. DO NOT USE THIS PRODUCT AS A SUPPORT. DO NOT SHAKE, LEAN OR CLIMB
ON THE PRODUCT. CHILDREN UNDER THE AGE OF 10, NEAR THE PRODUCT, SHOULD BE SUPERVISED BY A COMPETENT ADULT AT ALL TIMES.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE AND WILL VOID THE WARRANTY.
WARNING: This set is heavy, and may
require two adults for safe assembly.
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
WARNING: Do not place heavy objects on the set.
WARNING: Weight limit for each chair is 250lbs
(113.39Kg).
WARNING: Please keep children out of the assembly
area before assembly.
CAUTION: When not in use, secure the product in a
cool and covered location.
CAUTION: Do not locate the product near any heat
sources.
Table of Contents
Pre-Assembly.................................. . . . . . 3
Planning Assembly ............................ . . . . . 3
Hardware Included ............................ . . . . . 4
Stationary Chair Package Contents ................ . . . . . 4
Stationary Chair Assembly......................... . . . . 6
Swivel Chair Assembly ............................ . . . . 9
Table of Contents.............................. . . . . . . 2
Important Safety Instructions ...................... . . . . 2
What is covered ................................... 3
What is not covered ................................3
Warranty .............................. . . . . . . . . . . . . 3
Save These Instructions..............................2
Read All Instructions before Use .................... . . . 2
Care and Cleaning ............................. . . . . . 12
Swivel Chair Package Contents................ ... . . . . . 5
4. Do not rock in the stationary chair as you may fall and cause
5. Please keep children out of the assembly area before assembly.
serious injury.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Warranty
Pre-assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to assemble this product.
3 YEAR FRAME LIMITED WARRANTY
WHAT IS COVERED
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
s warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.
We warrant the frames to be free of manufacturing defects to the original purchaser for three years.

4
Pre-assembly (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
STATIONARY CHAIR PACKAGE CONTENTS
M6x15 Combination Bolt
M8x20 Combination Bolt
60+1
8+1
AA
BB
Hex Wrench 1
CC
Wrench 1
DD
Part Description Quantity
Stationary Chair Back
Stationary Chair Left Arm
Stationary Chair Right Arm
4
4
4
A
B
C
Stationary Chair Seat 4 D
BackCushion 4 E
Seat Cushion 4 F
Part Description Quantity
AA BB CC DD
A
B
C
D
E
F

5
Pre-assembly (continued)
SWIVEL CHAIR PACKAGE CONTENTS
BackCushion
Seat Cushion
Swivel Chair Back
2
2
2
E
F
G
Swivel Chair Left Arm 2 H
Swivel Chair Right Arm 2 I
Swivel Chair Seat 2 J
Support Bar 2 K
Swivel Base 2 L
Part Description Quantity
G
H
I
J
K
L
E
F
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
M
Plastic Cover 2 M

6
Stationary Chair Assembly
1Attaching The Stationary Chair Seat To The Stationary Chair Back
2Attaching The Stationary Chair Seat To The Stationary Chair Right Arm
Place the stationary chair back (A) and stationary
chair seat (D) on a soft surface.
Attach the stationary chair seat (D) to the stationary
chair back (A) using M6x15 combination bolts (AA).
Place the stationary chair right arm (C)
upside down on a soft surface.
Attach the stationary chair seat (D) to the stationary
chair right arm (C) using M6x15 combination bolts (AA).
NOTE: Loosely tighten all bolts using the hex wrench (CC).
NOTE: Loosely tighten all bolts using the hex wrench (CC).
AA AA
A
D
AA AA
D
C

7
Stationary Chair Assembly (continued)
3Attaching The Stationary Chair Seat To The Stationary Chair Left Arm
4Attaching The Stationary Chair Left And Right Arm To The Stationary Chair Back
Place the stationary chair left arm (B) upside down on a soft surface.
Attach the stationary chair left arm (B) and right arm (C) to the
stationary chair back (A) using M6x15 combination bolts (AA).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE: Loosely tighten all bolts using the hex wrench (CC).
NOTE: Loosely tighten all bolts using the hex wrench (CC).
AA AA
B
D
AA
A
C
B
Attach the stationary chair seat (D) to the stationary
chair left arm (B) using M6x15 combination bolts (AA)

8
Stationary Chair Assembly (continued)
5Tightening All The Bolts
Once all the bolts are in place, fully tighten all the bolts.
Turn the stationary chair right side up.
Place the seat cushion (F) and back cushion (E) on the stationary chair.
Ensure that all connections are secure before use.
E
F

9 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Swivel Chair Assembly
1Attaching The Swivel Chair Seat To The Swivel Chair Back
2Attaching The Swivel Chair Seat To The Swivel Chair Right Arm
Place the swivel chair back (G) and swivel chair
seat (J) on a soft surface.
Place the swivel chair right arm (I) upside down on a soft surface.
Attach the swivel chair seat (J) to the swivel chair right arm (I)
using M6x15 combination bolts (AA)
AA AA
G
J
AA AA
J
I
NOTE: Loosely tighten all bolts using the hex wrench (CC).
NOTE: Loosely tighten all bolts using the hex wrench (CC).
Attach the swivel chair seat (J) to the swivel chair
back (G) using M6x15 combination bolts (AA).

10
Swivel Chair Assembly (continued)
3Attaching The Swivel Chair Seat To The Swivel Chair Left Arm
4Attaching The Swivel Chair Left And Right Arm To The Swivel Chair Back
Place the swivel chair seat (J) and the swivel chair
left arm(H) on a soft surface.
Attach the swivel chair left arm (H) and right arm
(I) to the swivel chair back (G) using M6x15 combination bolts (AA)
AA AA
J
H
AA
G
I
H
NOTE: Loosely tighten all bolts using the hex wrench (CC).
Attach the swivel chair seat (J) to the swivel chair
left arm(H) using M6x15 combination bolts (AA).
Once all bolts are in place, fully tighten all bolts using the hex wrench (CC).