HAMPTON BAY Rock Cliff FTS61341 User manual

THANK YOU
USE AND CARE GUIDE
ROCK CLIFF RECTANGULAR DINING TABLE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # 1005 439 940
Model # FTS61341
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this table. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!

2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
WARNING: THIS TABLE WAS MADE FOR THE EXPLICIT PURPOSE OF PROVIDING OUTDOOR FUNCTIONS AND IS NOT TO BE USED AS A TOY.
THIS PRODUCT IS INTENDED FOR NORMAL OUTDOOR USE; HOWEVER, THE MANUFACTURER RECOMMENDS STORING AND/OR COVERING THIS
PRODUCT WHEN ANY FORMIDABLE/SEVERE WEATHER IS APPROACHING.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by
or near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
WARNING: DO NOT LOCATE THIS PRODUCT NEAR OPEN FLAMES. DO NOT USE THIS PRODUCT AS A SUPPORT. DO NOT SHAKE, LEAN OR CLIMB
ON THE PRODUCT. CHILDREN UNDER THE AGE OF 10, NEAR THE PRODUCT, SHOULD BE SUPERVISED BY A COMPETENT ADULT AT ALL TIMES.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE AND WILL VOID THE WARRANTY.
WARNING: This table is heavy, and may
require two adults for safe assembly.
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
WARNING: Do not place heavy objects on the table.
CAUTION: When not in use, secure the product in a
cool and covered location.
CAUTION: Do not locate the product near any heat
sources.
Table of Contents
Pre-Assembly.................................. . . . . . 3
Planning Assembly ............................ . . . . . 3
Hardware Included ............................ . . . . . 4
Package Contents . ............................ . . . . . 4
Assembly. . . . . . ................................. . . . . 5
Table of Contents.............................. . . . . . . 2
Important Safety Instructions ...................... . . . . 2
What is covered ................................... 3
What is not covered ................................3
Warranty .............................. . . . . . . . . . . . . 3
Save These Instructions..............................2
Read All Instructions before Use .................... . . . 2
Care and Cleaning ............................. . . . . . . 6
Please keep children out of the assembly area before assembly.
3.
This table is not intended to support an umbrella. Umbrellas must
have a suitable base or stand.
4.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Warranty
Pre-assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to assemble this product.
3 YEAR FRAME LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for three years.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
s warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.

4
Pre-assembly (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
PACKAGE CONTENTS
M6x20 Combination Bolt
Hex Wrench
16+1
1
AA
BB
Part Description Quantity
Umbrella Ring Cover
Table Top
1
1
A
B
Table Leg 2 C
Leg Connector 1 D
Part Description Quantity
A
B
C
D
AA BB

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1Connecting The Table Legs To The Table Top
2Attaching The Leg Connector To The Table Legs
Place the table top (B) upside down on a soft surface.
Connect the table legs (C) to the table top (B)
using M6x20 combination bolts (AA).
Attach the leg connector (D) to the table legs (C)
using M6x20 combination bolts (AA).
NOTE: Loosely tighten all bolts using the hex wrench (BB).
NOTE: Loosely tighten all bolts using the hex wrench (BB).
AAAAAA
C
B
C
D
AA
AA

6
Assembly (continued)
3Tightening All The Bolts
Once all the bolts are in place, fully tighten all the bolts.
Turn the table right side up.
Put the umbrella ring cover (A) into the table top (B).
Ensure that all connections are secure before use.
Store the table in a dry, sheltered place when not in use.
.
Care
For best results, clean the frame with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach or solvents.
Care and Cleaning
AB

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
For certification use only
Factory Table ID #FTS61341

THANK YOU
USE AND CARE GUIDE
ROCK CLIFF STEEL WICKER 4PC DINING CHAIR
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # 1005 443 324
Model # FRS81146-ST-1BC
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this set. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
BARE & PADDED BENCH

2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
WARNING: THIS SET WAS MADE FOR THE EXPLICIT PURPOSE OF PROVIDING OUTDOOR FUNCTIONS AND IS NOT TO BE USED AS A TOY.
THIS PRODUCT IS INTENDED FOR NORMAL OUTDOOR USE; HOWEVER, THE MANUFACTURER RECOMMENDS STORING AND/OR COVERING THIS
PRODUCT WHEN ANY FORMIDABLE/SEVERE WEATHER IS APPROACHING.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by
or near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
3. Do not move the chair while it is occupied. Failure
to obey this caution could result in injury.
the manufacturer.
WARNING: DO NOT LOCATE THIS PRODUCT NEAR OPEN FLAMES. DO NOT USE THIS PRODUCT AS A SUPPORT. DO NOT SHAKE, LEAN OR CLIMB
ON THE PRODUCT. CHILDREN UNDER THE AGE OF 10, NEAR THE PRODUCT, SHOULD BE SUPERVISED BY A COMPETENT ADULT AT ALL TIMES.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE AND WILL VOID THE WARRANTY.
WARNING: This set is heavy, and may
require two adults for safe assembly.
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
WARNING: Do not place heavy objects on the set.
WARNING: Weight limit for each chair is 250lbs
(113.39Kg).
WARNING: Please keep children out of the assembly
area before assembly.
CAUTION: When not in use, secure the product in a
cool and covered location.
CAUTION: Do not locate the product near any heat
sources.
Table of Contents
Pre-Assembly................................. . . . . . . 3
Planning Assembly ........................... . . . . . . 3
Hardware Included ........................... . . . . . . 4
Arm Chair Package Contents ................... . . . . . . 4
Armless Chair Package Contents ................ . . . . . . 5
Bench Package Contents....................... . . . . . . 6
Arm Chair Assembly. . . . . . ........................ . . . . 7
Armless Chair Assembly . . . . . . .................... . . . 10
Bench Assembly. . . . . . . .......................... . . . 11
Table of Contents....................................2
Important Safety Instructions ..................... . . . . . 2
What is covered ................................... 3
What is not covered ................................3
Warranty ............................. . . . . . . . . . . . . . 3
Save These Instructions..............................2
Read All Instructions before Use .......................2
Care and Cleaning ............................ . . . . . . 12
4. Do not rock in the chair as you may fall and cause serious injury.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Warranty
Pre-assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to assemble this product.
3 YEAR FRAME LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for three years.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
s warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.

4
Pre-assembly (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
ARM CHAIR PACKAGE CONTENTS
M6x20 Combination Bolt
M6x40 Combination Bolt
44+1
12+1
AA
BB
Hex Wrench 1
CC
Part Description Quantity
Chair Back
Left Arm
Right Arm
2
2
2
A
B
C
Chair Seat 2 D
Seat Cushion 2 E
Part Description Quantity
AA BB CC
A
B
C
D
E

5
Pre-assembly (continued)
ARMLESS CHAIR PACKAGE CONTENTS
Seat cushion
Armless Chair Seat
Front Leg
2
2
4
E
G
H
Left Rear Leg
Right Rear Leg
2
2
I
J
Part Description Quantity
G
H
JI
E
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

6
Pre-assembly (continued)
BENCH PACKAGE CONTENTS
Bench Top
Bench Leg
Bench Leg Connector
1
2
1
K
L
M
Part Description Quantity
K
L
M

7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Arm Chair Assembly
1Connecting The Chair Back To The Left Arm
2Attaching The Chair Seat To The Left Arm
Place the left arm (B) on a soft surface.
Insert the chair back (A) into the left arm (B).
Tighten using an M6x20 combination bolt (AA).
Do not tighten the bolt at this step.
Attach the chair seat (D) to the left arm (B) using M6x40 combination
bolts (BB) and an M6x20 combination bolt (AA), as shown below.
Do not tighten all bolts at this step.
AA
A
B
BB
D
B
AA

8
Arm Chair Assembly (continued)
3Attaching The Chair Seat To The Chair Back
4Attaching The Right Arm To The Chair Back
Place the chair back (A) on the soft surface.
Attach the chair seat (D) to the chair back (A) using M6x40 combination bolts (BB).
Do not tighten all bolts at this step.
Insert the chair back (A) into the right arm (C).
Tighten using an M6x20 combination bolt (AA).
Do not tighten the bolt at this step.
BB
D
A
AA
A
C

9
Arm Chair Assembly (continued)
5Attaching The Right Arm To The Chair Seat
6Checking The Arm Chair
Attach the chair seat (D) to the right arm (C) using M6x40
combination bolts (BB) and an M6x20 combination bolt (AA).
Once all of the bolts are in place, fully tighten all the bolts
using the hex wrench (CC).
Turn the arm chair right side up.
Ensure all connections are secure before use.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
BB
AA
C
D
E

10
Armless Chair Assembly
1Attaching The Armless Chair Legs To The Armless Chair Seat
2Checking The Armless Chair
Place the armless chair seat (G) upside down on a soft surface.
Attach the left rear leg (I), the right rear leg (J) and the two front legs (H)
to the armless chair seat (G) using M6x20 combination bolts (AA).
Fully tighten all the bolts using the hex wrench (CC).
Turn the armless chair right side up.
Ensure all connections are secure before use.
H
G
J
E
I
AA
AA
Place the armless chair seat cushion (E) to finish the assembly of the armless chair.

11 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Bench Assembly
1Attaching The Bench Legs To The Bench Top
2Attaching The Bench Leg Connector To The Bench Legs
Place the bench top (K) upside down on a soft surface.
Attach the bench legs (L) to the bench top (K)
using M6x20 combination bolts (AA).
Do not tighten all bolts at this step.
Attach the bench leg connector (M) to the bench legs (L)
using M6x20 combination bolts (AA).
Once all of bolts are in place, full tighten all the bolts
using the hex wrench (CC).
AA AA
K
L
AA
AA
L
M

12
Bench Assembly (continued)
3Checking The Bench
Turn the bench right side up.
Ensure all connections are secure before use.
Store the set in a dry sheltered place when not in use.
Care
For best results, clean the frameand fabric with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach or solvents.
Care and Cleaning

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
For certification use only
Factory Arm Chair ID #FRS81146
Factory Armless Chair ID #FRS81146B
Factory Bench ID #FRS811146F