HAMPTON BAY STATESVILLE FCS70357CS-ST User manual

THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this dining set. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item # 1001 518 096
Model # FCS70357CS-ST
USE AND CARE GUIDE
STATESVILLE 5PC DINING SET
Questions, problems, missing parts? Before returning to the store
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM

2
Table of Contents
Warranty ........................................................................2
What is Covered ...................................................................... 2
What is Not Covered ................................................................ 2
Pre-Assembly ................................................................3
Planning Assembly .................................................................. 3
Hardware Included .................................................................. 3
Care and Cleaning.......................................................13
Warranty
2 YEAR FRAME AND 2 YEAR FABRIC LIMITED WARRANTY
WHATIS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for two years, and a two year limited warranty for the fabric.
WHATIS NOT COVERED
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
Safety Information
PRODUCT CAUTION
This dining set was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is intended for
normal outdoor use; however, the manufacturer recommends storing and / or covering this set when any formidable / severe weather is
approaching. Do not locate the product near open ame. Do not use the product as a support. Do not shake, lean or climb on product.
Children under the age of 10, near the product, should be supervised by a competent adult at all times. This product is NOT intended for
commercial use and will void the warranty.
SAFETY WARNINGS
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, re, freezing and abusive use. In addition, purchased parts are not covered under this warranty. We
reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Chair Assembly ............................................................. 6
Chair Package Contents .......................................................... 4
Safety Information .......................................................2
Product Caution .................................................................... 2
WARNING: Weight limit for the chairs is 250 lbs
(113.39 kg) for each seat.
WARNING: This dining set is heavy, and may require
two adults for safe assembly.
CAUTION: When not in use, secure the product in a
cool and covered location.
!
Safety Warnings ..................................................................... 2
WARNING: Do not place more than 125 lbs of objects
on the table top.
Table Package Contents ..........................................................5
WARNING: Do not place heavy objects on the chair.
Table Assembly ...........................................................11
Table of Contents ........................................................2
WARNING: Always use an umbrella table ring.

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
assemble this product.
HARDWARE INCLUDED
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Part
Description
Quantity
AA M6x30 bolt 16+1
BB M6x20 bolt 16+1
CC M6x18 bolt 32+1
DD M6 washer 64+1
HH
GG
FF
EE
DD
CC
BB
AA
II
EE M8x20 hex bolt 16+1
FF M8 spring washer 16+1
Part
Description
Quantity
GG M8 washer
16+1
HH
Hex wrench 2
II
Wrench 2
NOTE: Hardware not shown to actual size.

4
Pre-Assembly (continued)
CHAIR PACKAGE CONTENTS
Part
Description
Quantity
A
Chair bucket 4
B
Left arm 4
C
Right arm 4
D
support bar 4
E
Front connection bar 4
F
Rear connection bar 4
G Swivel base 4
A
B
C
F
E
D
G

Pre-Assembly (continued)
TABLE PACKAGE CONTENTS
Part
Description
Quantity
H
Table top 1
I
Table leg 4
J
Leg connector 1
5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
J
H
I

1
l
6
Chair Assembly
Place the chair bucket (A) upside down on a soft surface.
Attach the support bar (D) to the bottom of the chair bucket (A) using M8x20 hex bolts (EE), M8 spring washers (FF) and
M8 washers (GG).
Connecting the support bar to the chair bucket
NOTE: Loosely tighten all the bolts using the wrench (II).
EE
FF
EE
FF
A
D
GG GG

2
l
7
Chair Assembly (continued)
Connecting the left arm to the chair bucket and the connection bars
Attach the left arm (B) to the chair bucket (A) using M6x30 bolts (AA) and M6 washers (DD).
Attach the front connection bar (E) and rear connection bar (F) to the left arm (B) using M6x18 bolts (CC) and M6 washers (DD).
NOTE: Loosely tighten all the bolts using the hex wrench (HH).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
A
B
F
AA
DD
E
DD
DD
CC
CC
CC
AA
DD
DD
CC
DD

3
l
8
Chair Assembly (continued)
Connecting the right arm to the chair bucket and connection bars
Repeat step 2 to attach the right arm (C) to the chair bucket (A) and front connection bar (E) and rear connection bar (F).
NOTE: Loosely tighten all the bolts using the hex wrench (HH).
E
F
C
A
CC
AA
DD
DD
CC
DD
AA
DD
DD
DD
CC
CC

4
l
9
Chair Assembly (continued)
Tightening all bolts, connecting the support bar to the swivel base
Turn the chair right side up.
Fully tighten all bolts.
Insert the support bar (D) into the swivel base (G).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
D
G

5
l
10
Chair Assembly (continued)
Checking the chairs
Ensure all connections are secure before use.

1
l
11
Table Assembly
Attach the leg connector (J) to the table legs (I) using M6x20 bolts (BB) and M6 washers (DD).
Connecting the leg connector to the table legs
NOTE: Loosely tighten all the bolts using the hex wrench (HH).
BB
DD
BB
I
J
DD
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

2
l
12
Table Assembly (continued)
Connecting the table legs to the table top
Place the table top (H) upside down on a soft surface.
Attach the assembled table legs (I) to the table top (H) using M6x20 bolts (BB) and M6 washers (DD) as shown below.
NOTE: Loosely tighten all the bolts using the hex wrench (HH).
BB
DD
BB
DD
H
I

3
l
13
Table Assembly (continued)
Tightening the bolts
Once all bolts are in place, fully tighten all the bolts.
Turn the table right side up.
Ensure that all connections are secure before use.
Care and Cleaning
For best results, cleanthe frame and fabric with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach, or solvents.
Store the set in a dry, sheltered place when notin use.
Keep the set away from re, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.