Haneco STAX G4 User manual

Thanks for choosing our STAX G4 LED Floodlight products.
We strongly recommend that you read this manual carefully before installation.
HANECO LED FLOODLIGHT INSTALLATION GUIDE
MODEL
VOLTAGE/FREQUENCY 220-240Vac,50/60Hz
POWER Color temperature Ecacy (lm/w) CRI SDCM Dimension (mm)
3/4/5000K 120lm/w @4000k >80 <5
WARNING
STAX200WG4 150/200W 336*266*35
Ambient temperature
IP66 Junction Box
*No supplied with product
The terminal block should be complying
with AS/NZS60998-2-1/IEC60998
-20 to 45ºC
Net Weight (kg) Max. Mounting height (m) Max. Projected area (m²)
0.0872.6 15
110° 3 Year50,000hrIP663000K/4000K/5000K
120lm/w
@4000K >80 IK08
Cable length: 1m
Last updated 15/08/23
For more information
www.haneco.com.au
1300 001 LED
The luminaire must be installed by professional electrician. Switch power o when wiring the luminaire. Ensure input voltage conforms to
the voltage range of product. Ensure wires are securely connected. Before switching on, ensure that all the wiring is correct. The warranty
is void if product is not installed according to the instructions.
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
1. Turn o the power.
2. Mark wall with appropriate fixing position, loosen the nut to make the angle adjustments before installing
the bracket with appropriately rated fixing hardware.
Installation Instructions

Last updated 15/08/23
For more information
www.haneco.com.au
1300 001 LED
HANECO LED FLOODLIGHT INSTALLATION GUIDE
3. Adjust luminaire to the desired angle then tighten the nut to secure the angle.
4. Connect luminaire to 240V main supply as per diagram.
5.Turn on the power.
Brown: L
Blue: N
Yellow & Green:
POWER selections MUST NOT be changed whilst the product is energised
CCT adjustable DIP Switch Power adjustable DIP Switch
Power
CCT
150W 200W
IMPORTANT
3000K
4000K
5000K
*Default Settings