Hanna Instruments Pool Line HI9310014 User manual

INSTRUCTION MANUAL
HI9310014
pH/mV Precision Simulator

All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner, Hanna Instruments
Inc., Woonsocket, Rhode Island, 02895, USA.
Thank you for choosing a Hanna Instruments product.
Please read this instruction manual carefully before
using this instrument.
This manual will provide you with the necessary
information for correct use of this instrument, as well as
a precise idea of its versatility.
If you need additional technical information, do not
hesitate to e‑mail us at [email protected] or view
our worldwide contact list at www.hannainst.com.
Dear
Customer,

3
TABLE OF CONTENTS
TABLE OF CONTENTS
1. PRELIMINARY EXAMINATION .....................................................4
2. GENERAL DESCRIPTION & INTENDED USE...................................4
3. FUNCTIONAL DESCRIPTION........................................................5
4. SPECIFICATIONS.......................................................................5
5. pH CALIBRATION ......................................................................6
6. mV (ORP) CALIBRATION............................................................7
7. pH / TEMPERATURE TABLE........................................................8
8. BATTERY REPLACEMENT ............................................................9
9. ACCESSORIES...........................................................................9
CERTIFICATION............................................................................10
RECOMMENDATIONS FOR USERS..................................................10
WARRANTY .................................................................................10

4
PRELIMINARY EXAMINATION
1. PRELIMINARY EXAMINATION
Remove the instrument and accessories from the packaging and
examine it carefully. For further assistance, please contact your local
Hanna Instruments Office or email us at [email protected].
HI9310014 is delivered in a cardboard box and supplied with:
• HI7858/1 BNC/BNC coaxial cable, 1 m (3.3’)
• 9V battery (1 pc.)
• Instrument quality certificate
• Instruction manual
Note: Save all packing material until you are sure that the
instrument works correctly. Any damaged or defective item must
be returned in its original packing material with the supplied
accessories.
2. GENERAL DESCRIPTION & INTENDED USE
The HI9310014 is a portable pH and mV simulator designed for
calibrating pH and mV (ORP) meters, part of Hanna Instruments
pool‑line family.
When connected to a meter’s input socket, by turning the dials, it
simulates the pH readings from 0 to 14 pH, in 0.01 steps. The output
signals all correspond to pH values at 25 °C.
For the mV range, HI9310014 can simulate output from ‑1000 to
1000 mV, in 1 mV steps.
Battery powered, allows use away from a power source. The LCD display
shows a low‑battery indicator that advises the user that the battery
should be replaced.
Main Features
• Simulate pH and mV(ORP) sensor outputs to discover malfunctions
• Provided with universal BNC connector, compatible with any meter or
electrode that uses BNC connectors

5
FUNCTIONAL DESCRIPTION
3. FUNCTIONAL DESCRIPTION
2
3
5 6
4
1
1. BNC socket
2. Liquid Crystal Display
3. pH and mV coarse‑setting knob
4. pH and mV fine‑setting knob
5. RANGE key
6. ON/OFF key
4. SPECIFICATIONS
Range 0.00 to 14.00 pH
‑1000 to 1000 mV
Resolution 0.01 pH / 1 mV
Accuracy (@20 °C) ±0.01 pH / 1 mV
Temperature
compensation all output values simulated at 25 °C (77 °F)
Battery type/ life 9V / approximately 500 hours of use
Environment 0 to 50 °C (32 to 122 °F); RH 95%
Dimensions 185 x 82 x 53 mm (7.3 x 3.2 x 2.1’’)
Weight 320 g (11.3 oz.)

6
pH CALIBRATION
5. pH CALIBRATION
1. Connect the simulator to the pH meter using the supplied HI7858/1
cable.
2. Manually set the temperature compensation of the meter to 25 °C.
3. Turn on the simulator.
4. Press RANGE key to select pH mode.
5. Make sure that the two additional decimal points are not displayed.
If displayed, replace the battery before proceeding.
6. Turn the coarse or fine dial to set the value, and make sure that the
pH meter displays the correct result (e.g. 7.01 pH).
7. If the reading is not correct, adjust the meter until the correct
reading is displayed (see meter instruction manual).

7
mV (ORP) CALIBRATION
6. mV (ORP) CALIBRATION
1. Connect the simulator to the ORP meter using the supplied
HI7858/1 cable.
Note: Temperature compensation does not apply to ORP (mV)
readings.
2. Turn on the simulator.
3. Press RANGE key to select mV mode.
4. Make sure that the two additional decimal points are not displayed.
If displayed, replace the battery before proceeding.
5. Turn the coarse or fine dial to set the value, and make sure that the
ORP meter displays the correct result.
6. If the reading is not correct, adjust the meter until the correct
reading is displayed (see meter instruction manual).

8
pH / TEMPERATURE TABLE
7. pH / TEMPERATURE TABLE
Temperature has an effect on pH. The calibration buffer solutions
are affected by temperature changes to a lesser degree than normal
solutions (see table).
Note: The pH simulation is not affected by this chemical behavior.
TEMP. pH VALUES
°C °F 4.01 6.86 7.01 9.18 10.01
0 32 4.01 6.98 7.13 9.46 10.32
5 41 4.00 6.95 7.10 9.39 10.25
10 50 4.00 6.92 7.07 9.33 10.18
15 59 4.00 6.90 7.05 9.27 10.12
20 68 4.00 6.88 7.03 9.22 10.06
25 77 4.01 6.86 7.01 9.18 10.01
30 86 4.02 6.85 7.00 9.14 9.96
35 95 4.03 6.84 6.99 9.10 9.92
40 104 4.04 6.84 6.98 9.07 9.88
45 113 4.05 6.83 6.98 9.04 9.85
50 122 4.06 6.83 6.98 9.01 9.82
55 131 4.08 6.84 6.98 8.99 9.79
60 140 4.09 6.84 6.98 8.97 9.77
65 149 4.11 6.85 6.99 8.95 9.76
70 158 4.12 6.85 6.99 8.93 9.75

9
BATTERY REPLACEMENT
8. BATTERY REPLACEMENT
HI9310014 is supplied with a 9 V battery that lasts for approximately
500 hours of continuous use.
When the battery capacity is low, two additional decimal points are
displayed.
Note: Only use the battery type specified in this instruction
manual.
To change the battery, slide off the back cover, replace the old battery
and re‑attach the cover.
Made in Romania
SN: XXXXXXXXXXXX
9. ACCESSORIES
HI710009 Shockproof rubber boot, blue
HI7858/1 BNC/BNC coaxial cable, 1 m (3.3’)
HI7858/5 BNC/BNC coaxial cable, 5 m (16.5’)
HI7858/10 BNC/BNC coaxial cable, 10 m (33’)

10
CERTIFICATION
CERTIFICATION
All Hanna Instruments conform to the CE European Directives.
RoHS
compliant
Disposal of Electrical & Electronic Equipment. The product should not
be treated as household waste. Instead hand it over to the appropriate
collection point for the recycling of electrical and electronic equipment which
will conserve natural resources.
Disposal of waste batteries. This product contains battery, do not dispose
of it with other household waste. Hand it over to the appropriate collection
point for recycling.
Ensuring proper product and battery disposal prevents potential negative
consequences for the environment and human health. For more information,
contact your city, your local household waste disposal service, the place of
purchase or go to www.hannainst.com.
RECOMMENDATIONS FOR USERS
Before using this product, make sure it is entirely suitable for your specific
application and for the environment in which it is used. Any variation
introduced by the user to the supplied equipment may degrade the
instrument’s performance. For your and the instrument’s safety do not use
or store the instrument in hazardous environments.
WARRANTY
All Hanna Instruments meters are warranted for two years against defects
in workmanship and materials when used for their intended purpose and
maintained according to instructions. This warranty is limited to repair or
replacement free of charge. Damage due to accidents, misuse, tampering or
lack of prescribed maintenance is not covered.
If service is required, contact your local Hanna Instruments Office. If under
warranty, report the model number, date of purchase, serial number (see
engraved on the back of the instrument) and the nature of the problem. If
the repair is not covered by the warranty, you will be notified of the charges
incurred. If the instrument is to be returned to Hanna Instruments, first
obtain a Returned Goods Authorization number from the Technical Service
department and then send it with shipping costs prepaid. When shipping
any instrument, make sure it is properly packed for complete protection.
MAN9310014 12/20

Hanna Instruments reserves the right to modify the design,
construction or appearance of its products without advance notice.

World
Headquarters
Hanna Instruments Inc.
Highland Industrial Park
584 Park East Drive
Woonsocket, RI 02895 USA
www.hannainst.com
MAN9310014 Printed in ROMANIA