Hanover 13286 DT42 User manual

1
Model #13286_DT42
USE AND CARE GUIDE
Dining Table
If you have any problems with this product,
CALL OUR CUSTOMER SERVICE HOTLINE at
1-866-391-4908
Monday - Friday 8am - 4:30pm (CST).

2
Table of Contents
Table of Contents .......................................................... 2
Warranty ......................................................................... 2
5 Year Frame Warranty .............................................. 2
Pre-installation .............................................................. 3
Planning Installation ................................................... 3
Hardware Included ..................................................... 3
Package Contents ...................................................... 4
Assembly ....................................................................... 5
Care and Cleaning ........................................................ 6
Warranty
For warranty and other helpful information, call 1-866-391-4908, Monday-
Friday, 8AM-4:30PM (EST).

3
Pre-installation
PLANNING INSTALLATION
PLEASE READ COMPLETE INSTRUCTION MANUAL PRIOR TO ASSEMBLY!
Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a
nonabrasive surface to avoid scratching.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size
AA
Part Description Quantity
AA M6*15 Hex bolt 16
BB
Washer
BB 16
NOTE: More than one person may be required
to complete the assembly of this product.
TOOLS REQUIRED
M6 Hex wrench (Included)

4
Pre-installation
PACKAGE CONTENTS
Part
Description
Quantity
A Table top 1
B
Support ring
4
C
Legs
1
B
C
A

5
Assembly
1Attaching the support ring
□
Attach the support ring (C) to the table legs (B)
using the M6x15 hex bolts (AA) and washers
(BB). Do not fully tighten the bolts.
3Positioning the table
C
□Turn the table over and set it down on its legs.
□The table is now ready for use.
B
C
AA
BB
2Attaching the legs
□Attach the table legs (B) to the table top (A) using
the M6x15 hex bolts (AA) and washers (BB).
B
A
AA
BB
□Ensure all the bolts are assembled correctly.
Tighten all the hex bolts (AA) with wrench.

6
Care and Cleaning
□ Do not allow water to build up in frames. This will cause corrosion and possible freeze damage in cold climates.
□ Use a mild soap and water for normal cleaning. DO NOT use janitorial or alcohol based cleaners. Some cleaners may
be marked as natural, but some ingredients may cause discoloration or have an adverse reaction to your finish.
□ Rinse with clean water and dry with a soft, absorbent cloth towel.
□ Treat frames with a liquid wax for maximum protection against UV rays and /or salty, damp air.
If you have any problems with this product,
CALL OUR CUSTOMER SERVICE HOTLINE at
1-866-391-4908
Monday - Friday 8am - 4:30pm (CST).
Retain this manual for future use.