overstock GHTVS-1403 User manual

SCREWDRIVER HAMMER
SELF-PREPARED TOOLS: Tools below are NOT included in package.
Read instruction carefully . See Furniture Parts list and Hardware List for guidance . Be sure you have all parts before you start assembling .
Place and assemble furniture on a clean flat soft surface , such as carpet or rug to pervent being scratched .
Before you begin, please follow assembly instructions carefully, then follow them step by step.
Reminder:
Please ensure that all surfaces and edges with colours/laminations are facing forward/outward.
1
2
PART LIST
TOP PANEL 1 PC MINI FIX
4
SIDE PANEL (L)
6
SIDE PANEL (R)
7
8
QTY
1 PC
1 PC
31 PC
5
HARDWARE
A
B
C
D
E
F
G
10 PCS
M3.5 X 16MM C.B SCREW 32 PCS
ALLEN KEY M4 1 PC
BOTTOM PANEL
H
I
J
K
M6 X 5OMM
CSK CAP WOOD SCREW 10 PCS
A1 A2 A3
M8 X 30MM WOOD DOWEL 28 PCS
9
10
11
4 PCS
LEG
5/8 NAIL 31 PCS
MODEL : GHTVS-1403ASSEMBLY INSTRUCTIONS PAGE: /4
1
1
12
13
BACK PANEL 1 PC
1 PC
ONE HOLE L BRACKET (2MM) 4 PCS
JCBC Screw M6 x 70
SPRING WASHER M6
FLAT WASHER M6
8 PCS
8 PCS
8 PCS
L
1 PC METAL SHELF SUPPORT 4 PCS
1 PC
DOOR PANEL (R)
1 PC
DOOR PANEL (L)
SHELF PANEL
2 PCS
BONE PANEL SOFT CLOSING 7/8 HINGES 4 PCS
CENTER PANEL (L)
CENTER PANEL (R) 1 PC
1 PC
CENTER PANEL
2
3
4
5
6
7
8
8
9
10
11
12
13

STEP 1 STEP 2
STEP 3 STEP 4
MODEL : GHTVS-1403ASSEMBLY INSTRUCTIONS PAGE: /4
2
- Insert hardware A2 onto panel (1).
(Repeat 10 times.)
- Assemble hardware F to panel (8) with hardware G.
(Repeat 2 times on each panel.)
- Insert hardware B onto panel (8).
(Repeat 4 times on each panel.)
SCREWDRIVER
REQUIRED
x4
ROTATE
F
G
x8
PRESS
B
A2
x10
ROTATE
8
1
- Insert hardware A1 onto panel (3), (4), (5), (6) and (7).
(Repeat 2 times on each panel.)
- Insert hardware B onto panel (3), (4), (5), (6) and (7).
(Repeat 4 times on each panel.)
* Ensure the arrows on hardware A1 point towards mounting positions.
PRESS
A1
x20
PRESS
B
x10
345
67
- Attach panel (8) to panel (3) and (5).
(Repeat 1 times.)
- Attach panel (8) to panel (4) and (6).
(Repeat 1 times.)
* In this step hardware B are pre-inserted.
3
5
4
6
- Attach panel (3), (4), (5), (6) and (7) to panel (1).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 10 times.)
OR
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
HARDWARE
E
ROTATE
Section View
x10
A2 A1
x10
PRESS
A3
3
5
7
6
4
1
8
8

STEP 5 STEP 6
STEP 7 STEP 8
MODEL : GHTVS-1403ASSEMBLY INSTRUCTIONS PAGE: /4
3
- Assemble hardware F on panel (8) to panel (3) and (5)
by using hardware G.
- Assemble hardware F on panel (8) to panel (4) and (6)
by using hardware G.
(Repeat 1 times on each side panel.)
SCREWDRIVER
REQUIRED
x4
ROTATE F
G
3
5
7
6
4
8
8
Connect panel (2) to panel (3), (4), (5), (6) and (7) by using hardware C and E.
(Repeat 10 times.)
* In this step hardware B are pre-inserted.
ROTATE
x10
C
E
3
1
1
5
7
6
4
2
Assemble part 13 into panel (2) by using hardware E, J, K and L.
(Repeat 2 times for each Leg.)
ROTATE
x8
EJ
K
L
13
3
5
7
6
4
213
HAMMER
REQUIRED
Assemble panel (10) to entire body with hardware D.
(Repeat 31 times.)
x31
HIT
D
10
2
4
1

STEP 9 STEP 10
STEP 11 STEP 12
MODEL : GHTVS-1403ASSEMBLY INSTRUCTIONS PAGE: /4
4
Insert hardware I into mounting positions on panel (6) and (7) by hand.
(Repeat 4 times.)
x4 PRESS
I
357
64
2
1
Assemble the panel (9) into between panel (6) and (7).
(Repeat 1 times.)
* In this step hardware I are pre-inserted.
4
1
6
2
9
7
5
3
Fix hardware H onto panel (11) and (12) by using hardware G.
(Repeat 2 times for each hardware.)
SCREWDRIVER
REQUIRED
x8
ROTATE
HG
11
12
- Fix hardware H into panel (3) and (4) by using hardware G.
(Repeat 4 times for each hardware.)
- Tighten or loosen the screw to adjust position of panel (11) and (12).
(Do only when needed.)
SCREWDRIVER
REQUIRED
* In this step hardware H have been assembled in panel (11) and (12).
ADJUST
ADJUST
H
HROTATE
x16 G
H
4
1
9
2
11
12
6
3
5