Hans Grohe 13620180 User manual

DE Montageanleitung 2
FR Instructions de montage 3
EN assembly instructions 4
IT Istruzioni per Installazione 5
ES Instrucciones de montaje 6
NL Handleiding 7
DK Monteringsvejledning 8
PT Manual de Instalación 9
PL Instrukcja montażu 10
CS Montážní návod 11
SK Montážny návod 12
ZH 组装说明 13
RU Инструкция по монтажу 14
HU Szerelési útmutató 15
FI Asennusohje 16
SV Monteringsanvisning 17
LT Montavimo instrukcijos 18
HR Uputstva za instalaciju 19
TR Montaj kılavuzu 20
RO Instrucţiuni de montare 21
EL Οδηγία συναρμολόγησης 22
SL Navodila za montažo 23
ET Paigaldusjuhend 24
LV Montāžas instrukcija 25
SR Uputstvo za montažu 26
NO Montasjeveiledning 27
BG Ръководство за монтаж 28
SQ Udhëzime rreth montimit 29
AR ﻊﻴﻤﺠﺘﻟا تﺎﻤﻴﻠﻌﺗ 30 13620180

Test certificate (see page 36)
extension set 28 mm (32698000) order as
an extra
Special accessories
Final assembly (see page 34)
Spare parts (see page 32)
Flow diagram (see page 31)
Dimensions (see page 31)
Adjustment
To adjust the hot water limiter on single lever
mixers, please see page 33. No adjustment
is necessary when using a continuous flow
water heater.
Symbol description
6Safety Notes
6Gloves should be worn during installation to prevent
crushing and cutting injuries.
6The hot and cold supplies must be of equal
pressures.
Installation Instructions
• The fitting must be installed, flushed and tested after
the valid norms.
• Prior to installation, inspect the product for transport
damages.
After it has been installed, no transport or surface
damage will be honoured.
• The fittings must be mounted in an insulated manner
and with sound insulation.
Assembly
Mount the body in such a way, that the outlet faces to
the top and that the marking on the protective cover is
flush with the face of the tiling.
Depth of fitting 55 - 83 mm.
Extension set 28 mm.
Note: When installation is complete ensure
that the mixer is turned off!
Technical Data
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C
Connections G 1/2: cold right - hot left
Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
The product is exclusively designed for drinking water!
English
4

31

32
32698000
92730000
95008000
95140000
96065000
95007000
98148000
(43x1,5)

33
+
2
13
45
67
60 °C 10 °C
0,3 MPa
0,3 МПа
0,3 لﺎﻜﺴﺑﺎﺠﻴﻣ

34
Talis E
33615000
Talis S
32635000
Focus S
31767XXX
Metris E
31671000
Metris S
31661000
Talis E²
31636000 /
31687000
Focus E
31765XXX Focus E²
31967000
Focus E²
31966000
Focus XL
31603003
Metris
31686000

35
Sportive2
31776000 Status 31778000
Avista
31772000 /
31706000
12
59-87
Ø 150
Status²
14187000 Planis
31702000

36 Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon [phone] · Telefax +49 (0) 7836/511440
E-Mail: [email protected] · Internet: www.hansgrohe.com
02/2012 9.07850.01
PA-IX DVGW SVGW NF WRAS KIWA ACS ETA
13620180 PA-IX 9628/IC X X X X X
DIN 4109
PA-IX 9628/IC