Hans Grohe Raindance 28507XX1 Installation guide

Raindance E 120 AIR 3-Jet
28507XX1
Raindance S 120 AIR 3-Jet
28514XX1
Installation Instructions / Warranty

2
Raindance E 120 Air 3-jet Handshower
28507XX1
Rain AIR
Balance AIR
Whirl AIR
Raindance S 120 Air 3-jet Handshower
28514XX1
Rain AIR
Balance AIR
Whirl AIR
Maximum Flow Rate 2.5 gpm
Maximum Flow Rate 2.5 gpm

3
Installation
Place the screen washer in the end of the handshower
hose. Screw the hose to the handshower.
If the flow of water becomes noticeably less, remove
and clean the screen washer.
Scale Removal
The Raindance Air 3-jet handshower incorporates the
Quick Clean™ cleaning system. If scale deposits are
noticed in the spray channels, turn the water on lightly
and rub the spray channels with a finger or a sponge.

4
If scale deposits are noticed on the spray face, pour
about 3/4” of a commercial scale remover, such as
Lime-Away™ or CLR™ ,into a shallow dish. Dilute the
remover according to the label instructions.
Soak only the spray face in the solution for the amount
of time specified on the label.
Rinse the handshower with clear water.
Reinstall the handshower. Turn on the water and al-
low the handshower to flush for at least one minute.

5
User Instructions
To change spray modes, push the selector lever until
the desired spray is achieved.
Rain AIR
Balance AIR
Whirl AIR
Replacement Parts
94246000
94246000
selector lever