Happy Beds Emily 4ft Metal Bed User manual

Title of Product
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
.
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep these instructions for future reference.
Emily 4ft & 4ft6 Metal Bed

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

ASSEMBLY INSTRUCTIONS
EMILY 4'6" BED
www.birlea.com
Page 1 of 4
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR
EMILY 4'6" BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY :
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
WARNING: If this bed is placed on a non-carpeted floor you must place some protection under all
legs to stop the bed frame from moving. If this is not adhered to there is no guarantee if the bed
frame collapses.
CARE & MAINTENANCE:
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
Vendor: S000053
Birlea
Suppliers of Inspiration

Vendor: S000053
Part List
Part
1 A1 8
2 B1 4
3 C2 10
4 D2 6
5 E2 11
6F122
7 G
H
I
3 4
2
2
Description
Headend M6 x 16mm JCBC Screw
Footend M6 x 50mm JCBC Screw
Side Support M6 Nut
Side Frame M6 x 35mm JCBC Screw
Mid Support Double Slat Cap
Base Leg Single Slat Cap
Slat Finial
M8 x 50mm JCBC Screw
M8 Nut
DescriptionBox Qty
Hardware List (found in box 1)
Part
**M4 Allen Key & M5 Allen Key provided
Step 1: Fix the Side Support (3) to the Headend (1) and Footend (2) using hardware part (A) but do not fully tighten yet.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Small Allen Key
A
A
1
3
Page 2 of 4
1
1
2
2
1
3
22
Qty
1
754
6
3
2

Vendor: S000053
Step 2: Place the Side Frames (4) underneath the Side Supports (3) and secure using hardware parts (B) and (C).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3: Place the Mid Supports (5) ON TOP of the Side Frames (4) and secure using hardware parts (H) and (I).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: Take the Base Leg (6) and fit to the Mid Support (5) according to the holes at the side using hardware parts (C) and (D).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
B
C
1
43
H
Big Allen
Key
45
I
D
D
C
Small Allen
Key
Base Leg
C
5
6
Page 3 of 4
Small
Allen Key
TOP

Vendor: S000053
Birlea
Suppliers of Inspiration
Step 5: Push hardware parts (E) into the Mid Support (5) then place hardware part (F) onto each Slat (7).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6: Slide the Slats (7) into hardware part (E) on the Mid Support (5) then push the ends into the Side Supports (3) firmly,
insert hardware part (G) to the frame posts.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 4 of 4
Additional Information :
For complete product information, images and dimension diagrams please visit the website www.birlea.com.
If you have any issues with your item please contact the retailer directly you purchased it from who will be able
to resolve any issues with Birlea.
Why don't you send us photos of your assembled furniture to [email protected] to be shared in our #birleahome
feature on instagram.
7
F
E
5
75
E
G
G
G
G
F
1
3
7

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes