Happy Beds Malmo 4FT Bed Frame User manual

Malmo 4FT Bed Frame
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
.
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
Assemble the product as close to its intended final location/room as possible.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Further instructions are on the following pages.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause damage to the
joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please contact our
customer services (details at the back of these instructions)
(Not metal)
These tools are not
necessary, but may help
to assemble the product.
Do NOT use any power
tools as this may
damage the frame.

Page 4of 15
Parts List
Parts Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Box
Qty
1
1
1
1
1
1
1
1
Headboard Frame
Left Wooden Post
Right Wooden Post
Footboard
Left Side Rail
Right Side Rail
Centre Storage Panel 1
Back Storage Panel
2 / 4
2
1
28
Slat
Hydraulic Arm Spacer
Side Metal Bar
End Metal Bar (HEADBOARD)
Center Metal Bar
2
Left Hydraulic Base Support c/w Pump Stopper
Right Hydraulic Base Support
Hydraulic Base Pump
1
2
1
17
4 / 4
3 / 4
1 / 4
1 / 4
1
Centre Storage Panel 2
Bottom Base Panel - Big 3
18
Bottom Base Panel - Small 1
19
1
1
End Metal Bar (FOOTBOARD)
20
1 / 4

Page 5of 15
Mini Fix
8 x 30 mm Wooden Dowel
M6 x 90 mm RBW + Barrel Nut
M8 x 15 mm JCBB Bolt RBW
M8 x 35 mm JCBB Bolt (BLACK)
Bracket 20mm x 58mm
Base Handle (HEADBOARD)
M6 x 40 mm JCBC Bolt BLK
Single Slat Cap
M4 Allen Key
Metal Corner Block
M8 x 25 mm JCBB Bolt RBW
M6 x 15 mm JCBC Bolt RBW
Double Slat Cap
M5 Allen Key
Hardware List (Found in box #)
Parts Description
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Box
Qty
8
16
2
4
16
8
10
8
4
1
14
6
28
14
1
1
Q
R
S
** You will also need a screwdriver and small mallet ( not provided ).
Wooden Button 4
M8 x 45 mm JCBB Bolt RBW with Nut
Bracket, Spring & Flat Washer
2 Person Assembly
8
Flat Washer BLK
4
2
Self adhesive 4mm X 35mm
T
3 / 4
4 / 4
3 / 4
Nut Bracket
NOT PROVIDEDNOT PROVIDED
U
Base Handle (FOOTBOARD) 1
Rubber or Wood Hammer
M12.8 Spanner 1
V
12.8

Page 6of 15
Step 1: Attach the headboard frame (1) and back storage panel (9) to the left wooden post (2) and right
wooden post (3). Secure the headboard frame using hardware parts B, Dand P, then secure the back
storage panel with hardware parts B, Hand I.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
D
P
B
1
D
P
I
H
B
9
2
3
L
LEFT
R
RIGHT
TOP
TOP

Page 7of 15
Step 2: Firstly, Loosen the Hex Nut from the Left & Right Hydraulic Base Support ,then fix the hydraulic
pump to each hydraulic base using the same Hex Nut & V. (shown in diagram 2.1. )
Next, fix the left & right hydraulic spacer together with hydraulic base supporter to the both side rails
using bolts G and than screw the minifix part Ato the both side rails
as shown in diagram 2.2.
G
10
16
10
18
18
16/17
18
Hydraulic Pump right installation.
2.1
2.2
A
LEFT
5
LEFT
L
LEFT
G
10
17
10 2.2
A
LEFT
6
LEFT
R
RIGHT
LEFT
RIGHT
LOSSEN
TIGHTEN
V
V
1.PLEASE MEASURED THE BOLT (G) LENGTH IS 35MM (BLACK).
2.PLEASE MAKE SURE TO FOLLOW THE AI WHEN ASSEMBLY.
!
G . M8 x 35 mm JCBB Bolt (BLACK)
35MM
1.PLEASE MEASURED THE BOLT (G) LENGTH IS 35MM (BLACK).
2.PLEASE MAKE SURE TO FOLLOW THE AI WHEN ASSEMBLY.
!
G . M8 x 35 mm JCBB Bolt (BLACK)
35MM

Page 8of 15
Step 3: Join together the left side rail (5) and right side rail (6) with the centre storage panels ①(7) and
centre storage panels ②(8) by using hardware parts Aand B.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
7
6
5
8
Step 4: Attach the headboard frame (1) and footboard (4) using hardware part E.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
1
4
E
E
A
A
B

Page 9 of 15
Step 5: Insert the large base panel (19) and small base panel (20) .
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6: Fix metal corner block C to the edge of footboard and side rails with bolt F as shown.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
F
C
20
19

Page 10 of 15
Step 7: Join together all the bed base parts (11),(12),(13) and (14) by using hardware parts L,S,T.
Important note: Please assemble follow arrow direction.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 8: Attach hardware parts Jand Kusing hardware part L.
Important note: Please assemble follow arrow direction.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
14 11
13
11
12
L
HEADBOARD
L
FOOTBOARD
L
J
HEADBOARD
HEADBOARD
HEADBOARD
FOOTBOARD
L
K
FOOTBOARD
L
TS
T
LS
JK
HEADBOARD FOOTBOARD

Page 11 of 15
Step 10: Assemble the bed base on the right & left hydraulic frame and fix bolts M starting from ' 10.1 ' to '
10.3 ' as shown and stick it the self adhesive U
as shown .
Important note : Do not tighten the bolts yet!, and this assemble must be done by two persons.
10.1
U
U
Left
Right
NO15
Step 9: Insert the slats (15) to hardware parts N and O then press into the base making sure they are
secure.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
HEADBOARD
FOOTBOARD
HEADBOARD
FOOTBOARD
HEADBOARD
FOOTBOARD
10.2
10.3
10.1
MM
10.2
M
10.3

Step 11: Tighten all bolts and screws now. Top view of assembly bed.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
HEADBOARD
FOOTBOARD
HEADBOARD
FOOTBOARD
HEADBOARD
Page 12 of 15

IMPORTANT NOTE
WHEN THE BED IS BUILT AND THE MATTRESS FRAME IS AT 45 DEGREE
ANGLE PLEASE PLACE THE MATTRESS ON THE BED.
PLEASE NOTE THAT THE WEIGHT OF THE MATTRESS IS REQUIRED TO
HELP CLOSE THE BED.
TO LOWER THE SLEEPING PLATFORM STAND AT THE FOOT END OF THE
BED AND PUSH SHARPLY
DOWNWARDS USING BOTH HANDS.
MATTRESS
Page 13 of 15
WARNING: Take care when assembling the base. Assemble the ottoman
as closed to its final position. The Ottoman has a powerful, mechanism
and after assembly should only be opened when the mattress is in place.

CAUTION :
PLEASE USE HYDRAULIC PUMP STOPPER FOR SAFETY PURPOSE.
Page 14 of 15
HYDRAULIC PUMP
STOPPER
(LOCK IN)
(LOCK OUT)

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
¤ƲȯǛȉƫǛƤƇdzdzɬ٪ƤǕƲƤǯ٪Ƈdzdz٪ȷƤȯƲɦ٪ۂ٪˚ɫǛǾǍȷ٪Ʌȉ٪ƲǾȷɍȯƲ٪ɅǕƲɬ٪ƇȯƲ٪ȷƲƤɍȯƲؘ
ÝǕƲǾ٪ǼȉɥǛǾǍ٪ɬȉɍȯ٪ȬȯȉƫɍƤɅؙ٪ƤƇȯƲnjɍdzdzɬ٪dzǛnjɅ٪ǛǾɅȉ٪ȬdzƇƤƲؘ٪vƲɥƲȯ٪ƫȯƇǍ٪ȉȯ٪ȬɍȷǕ٪ɅǕƲ٪ȬȯȉƫɍƤɅ٪ƇƤȯȉȷȷ٪ɅǕƲ٪˛ȉȉȯ٪Ƈȷ٪
ɅǕǛȷ٪ɦǛdzdz٪ƤƇɍȷƲ٪ƫƇǼƇǍƲ٪Ʌȉ٪ɅǕƲ٪ǬȉǛǾɅȷؘ٪Unj٪ɅǕƲ٪ȬȯȉƫɍƤɅ٪Ǜȷ٪ɍȷƲƫ٪ȉǾ٪ǕƇȯƫ٪˛ȉȉȯǛǾǍؙ٪ȷɍƤǕ٪Ƈȷ٪ɦȉȉƫ٪ȉȯ٪dzƇǼǛǾƇɅƲƫ٪
˛ȉȉȯؙ٪ɬȉɍ٪ǼɍȷɅ٪ȬdzƇƤƲ٪ȷȉǼƲ٪ȬȯȉɅƲƤɅǛȉǾ٪ɍǾƫƲȯ٪ɅǕƲ٪dzƲǍȷ٪Ʌȉ٪ȷɅȉȬ٪ɅǕƲ٪ȬȯȉƫɍƤɅ٪njȯȉǼ٪ǼȉɥǛǾǍؘ٪Unj٪ɅǕǛȷ٪Ǜȷ٪ǾȉɅ٪
adhered to, it could result in failure to the product that will invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
In the unlikely event that you have problems putting this product together or have damaged or
missing parts, please contact us by visiting:
https://www.happybeds.co.uk/customer-service
Notes