Happy Beds Pembroke 2 Drawer Bedside Table User manual

Pembroke 2 Drawer Bedside
Table
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

PARTS LIST
Part Item Qty
11
12
1
3
2
4
2
5
2
6
1
7
4
8
1
9
210
211
2
12
2
13
HARDWARE LIST
Part Item Qty
Wooden dowel
A
B
CF
44
42
30mm Screw
** You will need a small mallet and a screwdriver.
Recycle
2
m
01 2 345 6 7891 0
mm 1 1 1 2 1 3 1 4 1 5 1 6
Tack 12
Part Item Qty
Top Panel
Right Panel
Left Panel
Front Side Column
Back Side Column
Front Cross Member
Rear Cross Member
Slide
Back Background
Drawer Front
Left Side Drawer
Side of Right Drawer
Drawer Back
Part Item Qty
Vendor: S000238
2x
1
8
4
6
2
9
7
3
4
5
5
6
8
8
8
10
11
12
13
15
15
15
15
14
18mm Screw 4
60mm superb bar
D
E
4
2
Smooth shell pull
214 Drawer Bottom
415 Foot

STEP 1: Insert the hardware (A) in the parts shown.
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
STEP 2: Fix the right panel (2) and the left panel (3) onto the front side column (4) and the back side column (5)
using hardware (B).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Vendor: S000238
A
2x 4x
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
2
3
5
7
68
11
12
2
3
55
4
4
2x
2x
2x

STEP 4: Attach the front cross member (6) and rear cross member (7) into the right panel (2)
and the left panel (3) using hardware (B).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Vendor: S000238
B
B
B
D
15
7
6
6
2
3
3
2
15
15
15
15
STEP 3: Insert hardware (D) to the foot (15). Insert the foot into the right panel (2)
and the left panel (3).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
B
7