HOLLY&MARTIN UP101300TX User manual

UP101300TX Pair Purban Slipper
Chairs - Cool Gray
UP101700TX Pair Purban Slipper
Chairs - Red Orange
Assembly Instructions
Holly & Martin® a valued brand of SEI
Customer Service 1-800-633-5096
[email protected]
www.hollyandmartin.com

A Quantity
Of 1
Back
B Quantity
Of 1
Seat
C Quantity
Of 2
leg “C”
D Quantity
Of 2
leg “D”
E Quantity
Of 1
Pillow
1 Quantity
Of 12
Short Bolt
2 Quantity
Of 5
ong Bolt
3 Quantity
of 5
Flat Washer
4 Quantity
of 5
Spring Washer
5 Quantity
of 1
Allen Wrench M4
6 Quantity
of 1
Allen Wrench M5
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please call
Customer ervice at 1-800-633-5096.
Please call manufacturer for assistance, questions
or parts.
PAIR OF LIPPER CHAIR
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer ervice if missing hardware. Using a screw that is too long will cause damage.
before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below. You may receive extra hardware with your unit.

Figure 1
Note: These instructions detail
how to assemble one chair.
Repeat these steps to
assemble the other chair
Unpack and lay parts on clean,
padded surface like carpet or
blanket. Check that you have all
parts indica
ted on the front page.
Remove the black dust cover from
the bottom of the eat (B) to
locate 4pcs legs and 1pc pillow.
Figure 2
Attach Back (A) and eat (B)
using 5pcs Long bolts (2) and
flat washers (3) and spring
washer (4).
Tighten bolts with Allen wrench
(M5) as shown in Figure 2.
Note: Be sure to securely tighten
all bolts to create a strong
support.
Replace the black dust cover onto
the bottom of the chair with the
Velcro material as shown.
Figure 3
Attach one Leg (C) to the bottom
of seat (B) as show in Figure 3.
PAIR OF LIPPER CHAIR
Assembly Instructions
C
C

Figure 4
Attach another Leg (C) to bottom
of eat (B) using 6pcs short bolts
(1).
Tighten bolts with Allen wrench
(M4) as shown in Figure 4.
Figure 5
Attach one Leg (D) to bottom of
seat (B) as show in Figure 5.
Figure 6
Attach the other Leg (D) to the
bottom of eat (B) using 6pcs
short bolts (1)
Tighten them by using Allen
wrench (M4) as shown in Figure 6.
Please recheck that all bolts are
securely tightened.
PAIR OF LIPPER CHAIR
Assembly Instructions
C
D
D
D
D

Figure 7
Turn the chair upright and place
Pillow (E) on the seat.
Now your chair is ready to use!
Seat support up to 250 lbs

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame. Parts will not be available for items arriving fully assembled. e do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or
replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at ser[email protected]. Please ask for customer service representative
for issues involving damages or replacement parts. Please ask for technical assistance representative for any
issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/ ebsite/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service 1-800-633-5096
[e-mail]
www.hollyandmartin.com
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form