Happy Beds Harper - King User manual

Assembly Instructions
Harper - King
www.happybeds.co.uk
Important before assembly:
.
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

 
  
  
Page 3 of 8


   
 
   
   
*You will need a screwdriver (not provided)
Step 1



Page 4 of 8

Step 2
Unzip the black non-woven fabric on the back of 1 x Headboard (1) and take out the 2x Side Wing (8).
Back View!!
Step 3
Attach the 4x Legs (6) to the 1 x Headboard (1) and 1 x Fooboard (2).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 5 of 8

Step 4
Tighten the Side Wing (8) to 1 x Headboard (1) as shown.
Step 5
0
®
e label!
Attach 2x Side Rail (3) to 1 x Footboard (2) and 1 x Headboard (1) by pushing the bracket down to fit it.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 6 of 8

Step 6
2x (7) lx (4) 2x M6x40mm JCBC (A)  lx M4 (D).
2x 2x (7).
ATTENTION:
Please keep the adjuster around Sto 8mm
distant away om the oor.
Step 7
  (4) (1)  (2).
 (F) 
Attention : Please ensure that (F) screw
is being attach as per the A.I shown to
avoid base being collapse.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 7 of 8

Step 8
(5) (G) (H). 
(3) (4).
Page 8 of 8

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the product across the
floor as this will cause damage to the joints. If the product is used on hard flooring, such as
wood or laminated floor, you must place some protection under the legs to stop the product
from moving. If this is not adhered to, it could result in failure to the product that will invalidate
the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes