Home Styles Blake 2000-201-FB02 User manual

Part List
2000-201-FB02
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Loveseat
A.
Base
1 pc.
E.
Back
1 pc.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
For assembly see instructions in carton -FB02.2000-202
G.
Back Cushion
2 pcs.

Part List
2000-202-FB02
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Loveseat
C.
Side
1 pc.
D.
Side
1 pc.
F.
Seat Cushion
2 pcs.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
Carton 2000-201-FB02 is also needed for assembly.
B.
Foot
4 pcs.

Assembly Instructions 2/3
STEP 2
Attach Feet (B) to unit, then tighten.
STEP 1
Attach Base (A) to Side (C) by sliding metal slots into position.
(See Figure 1)
Attach Side (D) to unit by sliding metal slots into position.
B
B
B
B
Metal Slot
Figure 1
A
IMPORTANT
Use a soft cloth between these parts and the floor.
C
D

Assembly Instructions /33
STEP 3
Attach Back (E) to unit by sliding metal slots into position.
Lock Back (E) in position with latches. (See Figure 2)
Attach back cover to back of unit. (See Figure 3)
STEP 4
Place Seat Cushions (F) into position.
Place Back Cushions (G) into position.
Figure 2 Figure 3
EMetal Slot
Latch
Back Cover
FF
GG

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 1 year of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460