Harken Industrial CMC CLUTCH User manual

Activities involving the use of this device are potentially dangerous. You are responsible for
your own actions and decisions. Before using this device, you must:
• Read and understand these user instructions and warnings.
• Familiarize yourself with its capabilities and limitations.
• Getspecictraininginitsproperuse.
• Understand and accept the risks involved.
FAILURE TO HEED ANY OF THESE WARNINGS MAY RESULT IN SEVERE INJURY OR DEATH.
Find the latest version and translations of the CLUTCH Manual at cmcpro.com
Patented
by
13 mm (1/2 in) CLUTCH
EN
CN
JP
ES
WARNINGS
ANSI/ASSE Z359.4-2013
5F04
GENERAL USE (G)
NFPA 1983 (2017 ED)

CLUTCH USER MANUAL2
NFPA CERTIFICATION
INFORMATION FOR 335013
MEETS THE DESCENT CONTROL DEVICE, BELAY
DEVICE, AND PULLEY REQUIREMENTS OF NFPA
1983, STANDARD ON LIFE SAFETY ROPE AND
EQUIPMENT FOR EMERGENCY SERVICES, 2017
EDITION.
EMERGENCY SERVICES, DESCENT CONTROL DEVICE, BELAY DEVICE, AND
PULLEY IN ACCORDANCE WITH NFPA 1983 (2017 ED). DESCENT CONTROL
DEVICE, ALSO IN ACCORDANCE WITH ANSI / ASSE Z359.4 - 2013.
• GENERAL USE (G), DESCENT CONTROL, ø 12.5 - 13 mm
• GENERAL USE (G), BELAY, ø 12.5 - 13 mm
• GENERAL USE (G) PULLEY, MBS 40kN (8,992 Ibf)
This Descent Control and Belay Device has passed the manner of function and holding
load test using the following ropes:
• CMC Static-Pro™ LifeLine 12.5 mm P/N 28120X
• Teufelberger KM III 13 mm P/N K0X160
For information on performance when used with other life safety ropes, please contact
CMC or see the CLUTCH technical content available at cmcpro.com
5F04

CLUTCH USER MANUAL 3
CONTENTS
1 | TRACEABILITY & MARKINGS 4
2 | FIELD OF APPLICATION 5
3 | NOMENCLATURE 6
4 | INSPECTION POINTS TO VERIFY 7
5 | COMPATIBILITY 7
6 | WORKING PRINCIPLE 8
7 | INSTALLATION / RIGGING 9
8 | FUNCTION TEST 11
9 | SECURING / TIE-OFF 12
10 | PRECAUTIONS FOR USE 13
11 | HEAVY LOADS / EXPERT USE ONLY 15
12 | NFPA 1983 (2017 ED) 15
13 | ANSI Z359.4 15
14 | RESCUE SYSTEM BELAYING 16
15 | HAULING 16
16 | DESCENT AND LOWERING 17
17 | ASCENDING 17
18 | WORK POSITIONING 18
19 | ADDITIONAL INFORMATION 18
20 | EQUIPMENT RECORD 19
21 | PERIODIC CHECKS AND INSPECTIONS 20
22 | MANUAL TEXT 21
Page No.

CLUTCH USER MANUAL4
1 TRACEABILITY & MARKINGS
H, K
AC
B
F, G
D
E
L
I
J

CLUTCH USER MANUAL 5
A Mark and Information of NFPA
Certication Body
5F04
B Standard Markings
MEETS NFPA 1983 (2017 ED)
Descent Control “G” Ø 12.5 - 13 mm
Belay “G” Ø 12.5 - 13 mm
Pulley “G” MBS 40 kN, Becket 22 kN
ANSI Z359.4-2013
60-141 kg
Ø 13 mm ONLY
!X m/s
max
!
!
MAX 200m Multiple Use n=2
Avoid chemical, thermal or electrical
hazards
C Carefully Read the Instructions for
Use
D Model Identication 335013
E Individual Number
0000 000 - 000
Unit Serial Number
Control
Day of Manufacture
Year of Manufacture
F Inspection Interval (Minimum 12
months)
G Special Notice or Caution
!X m/s
max
!
!
H Antipanic Stop
I Anchor/Load End of Rope
J Free End of Rope
K Handle Positions
L Manufacturer & Contact Information
CMC Rescue, Inc.
6740 Cortona Drive
Goleta, CA 93117
United States
International: 800-513-7455
Domestic U.S.: 805-562-9120
2 FIELD OF APPLICATION
SEE TEXT

CLUTCH USER MANUAL6
3 NOMENCLATURE
11
2
6
13
14

CLUTCH USER MANUAL 7
4 INSPECTION POINTS TO VERIFY
Wear
Indicator x3
Wear
Indicator
5 COMPATIBILITY
SEE TEXT FOR MORE
NFPA 1983 (2017 ED) “GENERAL USE” Descent Control Device / Belay Device / Pulley
CMC Static-Pro™ LifeLine 12.5 mm P/N 28120X General Use Life Safety Rope
Teufelberger KM III 13 mm P/N K0X160 General Use Life Safety Rope
ANSI/ASSE Z359.4-2013 Descent Control Device
Teufelberger KM III 13 mm P/N K0X160 60-141kg MAX 200m

CLUTCH USER MANUAL8
6 WORKING PRINCIPLE
!
!
!
Lower/Descent Stop Antipanic Stop
!
!
Lock Haul

CLUTCH USER MANUAL 9
2x
7 INSTALLATION / RIGGING
!
Loading the rope incorrectly
could cause imminent risk of
injury or death.
Installing the Rope
Usage on Anchor

CLUTCH USER MANUAL10
Locking the Side Plate and Latch

CLUTCH USER MANUAL 11
!
!
23 1
4
!X m/s
max
!
!
8 FUNCTION TEST
!X m/s
max
!
!
WARNING: DANGER OF DEATH. Do not allow anything to interfere with the
operation of the device or its components (Sheave, Control Handle, etc.). Any
constraint on the device may negate the braking function.

CLUTCH USER MANUAL12
9 SECURING / TIE-OFF
!X m/s
max
!
!

CLUTCH USER MANUAL 13
10 PRECAUTIONS FOR USE
!X m/s
max
!
!
!X m/s
max
!
!

CLUTCH USER MANUAL14
!X m/s
max
!
!
!X m/s
max
!
!
!X m/s
max
!
!
!X m/s
max
!
!

CLUTCH USER MANUAL 15
11 HEAVY LOADS / EXPERT USE ONLY
.5 m/s
max
.5 m/s
max
12 NFPA 1983 (2017 ED)
SEE TEXT
13 ANSI Z359.4
SEE TEXT

CLUTCH USER MANUAL16
14 RESCUE SYSTEM BELAYING
15 HAULING

CLUTCH USER MANUAL 17
16 DESCENT AND LOWERING
17 ASCENDING
!

CLUTCH USER MANUAL18
18 WORK POSITIONING
19 ADDITIONAL INFORMATION
1 3 4 5
6 8 9 10
7
!X m/s
max
!
!
!X m/s
max
!
!
!X m/s
max
!
!
!X m/s
max
!
!
!X m/s
max
!
!
!
X m/s
max
!
!
!
X m/s
max
!
!
!X m/s
max
!
!
!X m/s
max
!
!
!X m/s
max
!
!
5
6
7
8

CLUTCH USER MANUAL 19
Product Name, Model CLUTCH, CMC P/N 335013
Product Type
Rescue Descender / Working Line
Descender / Braking device with
manually assisted locking / Pulley
Manufacturer
CMC RESCUE, INC
6740 Cortona Drive
Goleta, CA 93117 USA
Tel, Fax, Email
and Website
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: www.cmcpro.com
User (company, name, and address)
Individual Product Number
Year of Manufacture
Purchase Date
Date of First Use
Expiration Date
20 EQUIPMENT RECORD

CLUTCH USER MANUAL20
No.Date Reason for
Check
Notes
(damage, defects,
excessive wear or
other relevant data)
Check Results Name & Signature of
Competent Person
Performing Check
Date of
Next
Check
1
Periodic check
Additional check
2
Periodic check
Additional check
3
Periodic check
Additional check
4
Periodic check
Additional check
5
Periodic check
Additional check
6
Periodic check
Additional check
7
Periodic check
Additional check
21 PERIODIC CHECKS AND INSPECTIONS
Device Periodic Check Sheet