Powered for today and tomorrow! Harman Kardon A/V receivers define their power
bymore than just the traditional benchmarks of watts and dBs. Rather, their power is expressed by the capabilities of the
processors that drive the units, software upgradeability and RS-232 control, assignable wide-bandwidth component video
inputs and A/V Sync Delay features. This lets you accommodate today’s sources and the high-resolution audio and video
products to come.
Single-cable, multiroom.The innovative A-BUS system uses a single Category 5/5e cable
connection to deliver audio signals and power to remote room modules with built-in amplifiers to power in-wall speakers.
IR signals from the remote room also travel on the same cable for complete system control. A-BUS is the easiest way to
extend Harman Kardon power to any room in the house.
15
ABH 44-Room A-BUS Expansion Hub
The ABH 4 extends A-BUS®capability of any Harman Kardon A-BUS/READY ®receiver to four rooms, or even more when additional
ABH 4 hubs are used. With the ABH 4, no room in the house need be without music! Thanks to onboard audio inputs, the ABH 4
may also bring the ease of A-BUS to any multichannel or stereo receiver with a “Tape” or “Multiroom” output; you can even use it
directly with a single CD or DVD player or outboard tuner to bring music to any room.
AVR 635 7 x 75W 7.1-Channel Receiver
Power meets power.The AVR 635 combines the sonic power of a high-current, ultrawide-bandwidth amplifier with the computing
power of Texas Instruments’ most advanced audio DSP to deliver unparalleled performance. Thanks to Harman Kardon’s advanced
EzSet/EQ functionality,the AVR 635 not only automates speaker,output and delay settings; it corrects for room acoustics with a
parametric equalizer.Add video conversion circuits that output all video sources via component connections with on-screen graphics,
and you have the power to tame any system and deliver powerful performance.
AVR 435 7 x 65W 7.1-Channel Receiver
Perfect home theater, no waiting! Thanks to EzSet/EQ, setting up the AVR 435 is quick and simple. Plug in the compact microphone,
press a few buttons,wait a few minutes for test tones to calibrate the system, and you’re ready to rock. No more complex configuration
settings, just precise measurements made automatically. Once you’re ready to listen, you’ll find the latest in DSP technology, with all the
popular surround modes, a high-current amplifier, a host of second-zone possibilities and high-current power to spare.
14
AVR
A/V Receivers A-BUS
Components
AB 1 Amplified In-Wall Module for
A-BUS Applications
The innovative A-BUS system makes it incredibly
easy to bring Harman Kardon sound to a remote
room. Connected via a single cable, the AB 1
powers most in-wall speakers from its internal
amplifier, with volume controlled by the up/down
toggle or a Harman Kardon remote.A built-in IR
sensor completes the package, making it simpler
than ever to enjoy music throughout the house.
www.harmankardon.com
EzSet/EQ & EzSet+
If you can’t wait to set up a new receiver or are
simply technology-shy, Harman Kardon has the
answer you have been waiting for. Both EzSet/EQ
and EzSet+ use a high-precision microphone
to test and control circuitry on board for quick
and easy calibration of speaker settings, output
levels and delay times with accuracy that rivals
expensive test gear. EzSet/EQ (AVR 635 and
AVR 435) adds proprietary software to equalize
the system to optimize the receiver’s output so that
it matches the sonic signature of your speakers
and each room’s individual characteristics.
(Actual size is 2-1/4" high by 1-1/2" diameter.)