Harman JBL PRX800 User manual

1 of 7
v1.0
PRX800 APP TUTORIAL
25-Nov-
20
REQUIREMENTS:
A PRX800 SERIES SPEAKER
A TABLET WITH THE PRX CONNECT APP INSTALLED
AND A WI-FI ROUTER
NOTE: (WI-FI ROUTER NOT REQUIRED FOR SINGLE BOX CONNECTION)
STEP 1
“A FRESH START”
PERFORM A MASTER RESET TO ENSURE ALL CONNECTIONS ARE CLEARED
WITH THE UNIT POWERED OFF, PRESS AND HOLD THE UPPER LEFT BUTTON
WHILE PRESSING AND HOLDING, POWER THE UNIT ON
CONTINUE TO HOLD FOR 5 SECONDS
RESET IS NOW COMPLETE

2 of 7
STEP 2
OPEN THE APP AND FOLLOW THE ON SCREEN INSTRUCTIONS:
• SET UP A NEW SHOW
• NAME IT (OPTIONAL)
• SELECT NEXT
• NEXT, SET THE SPEAKER FOR WI-FI CONNECTION
STEP 3
• PRESS AND HOLD THE CONNECT BUTTON
UNTIL THE LED FLASHES, INDICATING CONNECTION READY

3 of 7
• YOU MUST NOW GO TO YOUR DEVICE’S WI-FI
SETTINGS AND SELECT ANY NETWORK LABELED
PRX800 XX.XX.XX
• THE CONNECT LED SHOULD NOW FLASH RAPIDLY! INDICATING A CONNECTION
BETWEEN THE DEVICE AND SPEAKER
STEP 4
FINAL CONNECTION
• PROVIDE SSID AND PASSWORD

4 of 7
• CLICK NEXT AND FOLLOW ON SCREEN PROMPTS
• WHEN FINISHED
THE SPEAKER SHOULD DISPLAY
A SOLID BLUE CONNECT LIGHT
STEP 5
• SPEAKERS WILL BECOME AVAILABLE “FOUND”
AND ARE NOW READY TO BE ADDED THE SHOW
TO ADD ADDITIONAL SPEAKERS:
• SELECT MENU, THEN WI-Fi

5 of 7
• REPEAT STEPS 1, 3, 4 & 5.
• FOR SINGLE BOX CONNECTION
• FOLLOW STEPS 1, 3 & 5
• NO ROUTER REQUIRED,
NO SSID OR PASSWORD.