Harman KARDON CITATION MULTIBEAM 1100 User manual

OWNER’S
MANUAL
CITATION
MULTIBEAM 1100

/
2
IMPORTANT SAFETY
INSTRUCTIONS
Verify Line Voltage Before Use
The CITATION MULTIBEAM 1100 soundbar has been designed
for use with 100-240 volt, 50/60 Hz AC current. Connection to
a line voltage other than that for which your product is intended



contact your selling dealer before plugging the unit in to a wall
outlet.
Do Not Use Extension Cables
To avoid safety hazards, use only the power cable supplied

used with this product. As with all electrical devices, do not run
power cables under rugs or carpets, or place heavy objects on



Handle the AC Power Cable Gently

pull the plug; never pull the cable.
If you do not intend to use your speaker for any considerable

Do Not Open the Cabinet





center.

/
3
TABLE OF
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS.............................................. 2
 ......................................................................................... 4
WHAT’S IN THE BOX ................................................................................ 5
.............................................................................. 6
PLACE ............................................................................................................. 11
CONNECT ....................................................................................................14
SETUP .......................................................................................................... 29
.........35
PLAY ............................................................................................................... 37
 ..................................................................................48
RESTORE FACTORY SETTINGS ........................................................ 50
................................................................................51
 ...............................................................53
TROUBLESHOOTING ............................................................................ 55
........................................................................................... 60

/
4




includes step-by-step instructions to help you set up and get
started. Read and understand all the safety instructions before
using your product.
This product may have an important software update
available. Please follow the instructions to connect the
product to Wi-Fi to ensure that your product has the most
recent software updates.


all countries.
If you have any questions about this product, its installation or



/
5
WHAT’S IN THE BOX



1
2 3 4 5 6
x 2
x 2
x 4
x 4 x 2
1. Main unit
2. Power cable*
3. HDMI cable
4. Remote control (with 2 AAA batteries)
5. Wall-mounting kit
6. Product information & wall-mounting template
*Power cable quantity and plug type vary by regions.
Insert batteries before using the remote control (AAA
batteries x 2)
Slide the battery cover in the direction of the arrow until it is

that their polarity is correct. Slide the battery cover back into
position.

/
6

Front Panel & Top Panel
1
2
3
1. Touch screen
• 
• Tap an icon to select.
• Tap to return to the previous screen, tap to go to

Wi-Fi signal indicator.
/ / 




product.
2. - / + (Volume)
• 
• 


7
3. LED indicators
TV Solid white for 3 seconds 
HDMI Solid white for 3 seconds 
Bluetooth
Flashing blue quickly Bluetooth pairing
Solid blue Bluetooth connected
Flashing blue slowly Bluetooth not connected
Bass / treble
adjustment Solid white
-2
-1
0
+1
+2
ATMOS
Solid white Level 3
Half brightness 
Low brightness Level 1
SURROUND
Solid white Level 3
Half brightness 
Low brightness Level 1
 Level 0
Calibration
Scrolling white Calibration in progress
Solid white for 3 seconds Calibration done
Flashing white slowly Calibration failed


8
Back Panel
5
7654321
1.
• Connect to the power cable.
2. HDMI IN
• 
3. HDMI OUT (TV eARC/ARC)
• 
4. OPTICAL
• 
digital device.
5. USB
• USB connector for software update.
6. ETHERNET
• 
cable.
7.
• Press and hold for 5 seconds to restore the factory
settings.


9
Remote Control
2
3
1
4
5
6
8
10
7
9
1. (Power)
• Power on or switch to standby.
2. Sources
• Select an input source for the
soundbar: TV / / HDMI.
• Press and hold to pair with a new
device.
3. + / -
• 
level.
4.
• 
5. BASS
• Adjust the bass level of the soundbar

6. TREBLE
• Adjust the treble level of the
soundbar.
7. ATMOS
• 

8.
• Soundbar only: Enable or disable

Surround
• With optional Citation Surround:
Adjust the rear surround speaker
level.


10
9. CALIBRATION
• 

10. PLAY/PAUSE
• 
• 
• 
NOTE:
• 

/
11
PLACE
Desktop placement

> 4 m / 13 ft
> 2 m / 6.6 ft
> 5 cm / 2”
NOTES:
• The power cable shall be properly connected to power.
• 

PLACE
12
Wall-mounting
≤8 mm/
0.31"
4mm/
0.16"
≥30 mm/1.18"
23
44
1
745 1 mm
 Preparation:
 

adhesive tapes.
 

 
 
 

 Mount the soundbar.

PLACE
13
NOTES:
• Make sure that the wall can support the weight of the soundbar.
• Install on a vertical wall only.
• 
• 

• 


/
14
CONNECT
Connection with your TV and digital devices
For audio playback through the soundbar, connect the




soundbar.
HDMI eARC
HDMI OUT
*
HDMI (eARC)

CONNECT
15
 Connect the soundbar with the HDMI IN (eARC) connector

• 


 


console.
• 


• 


 
Power-on/Auto standby/Auto
wakeupTV source.

CONNECT
16
HDMI ARC
HDMI (ARC)
HDMI OUT
*

CONNECT
17
 

• 


 


• 


• 


 
Power-on/Auto
standby/Auto wakeupHDMI source.
NOTE:
• 



connectors to the soundbar.

CONNECT
18
OPTICAL
HDMI OUT
*
NOTE:
• 




CONNECT
19
 
cable.
 


 To play audio through the optical cable, switch on the
Power-on/Auto standby/Auto wakeup
select the TV source.
NOTES:
• 
cable are sold separately.
• 
• 


Bluetooth connection
Through Bluetooth, connect the soundbar with your Bluetooth

< 10 m / 33 ft
Settings Bluetooth
Bluetooth
DEVICES
HK Citation MultiBeam 1100_XXXX
Now Discoverable
Connected
1
2

CONNECT
20
Connect a Bluetooth device
 Power-on/Auto standby/Auto
wakeup
 To select Bluetooth source, tap on the touch screen or
press 
ÆThe 2nd
 On your Bluetooth device, enable Bluetooth and search for
HK Citation MultiBeam 1100_XXXX
ÆSuccessful connection: The 2nd

To reconnect the last paired device
Your Bluetooth device is retained as a paired device when

the Bluetooth source, the soundbar reconnects the last paired

To connect to another Bluetooth device
3S
 In the Bluetooth source, hold on the touch screen or

Æ
soundbar.
Æ