Harvia Linear 18 Compact WKLI18CPTM User manual

Harvia Linear 18 Compact
WKLI18CPTM
EN Instructions for Installation and Use of Woodburning Stove
DE Anleitung für Montage und Gebrauch des holzbeheizten Saunaofens
18102022 / Y05-1174 A
EN
DE

EN: Contents
Congratulations on your choice! The Harvia sauna stove
works best and serves you longest when it is used and
maintained according to these instructions.
Read the instructions carefully before installing or using
the stove. Keep the instructions for future reference.
DE: Inhalt
Wir beglückwünschen Sie zu Ihrer guten Wahl! Der
Harvia Saunaofen funktioniert am Besten und am
längsten, wenn Sie ihn dieser Anleitung entsprechend
benutzen und warten.
Lesen Sie die Anweisungen vor der Montage und
Inbetriebnahme des Ofens aufmerksam durch. Bewahren
Sie die Anweisungen zum späteren Nachschlagen gut auf.
INSTALLATION IMAGES..........................................4
WARNINGS AND NOTES........................................ 10
1. GENERAL.........................................................13
1.1. Technical Data...............................................................13
2. INSTRUCTIONS FOR INSTALLATION................. 13
2.1. Before Installation........................................................ 13
2.2. Ventilation of the Sauna Room.................................. 14
2.3. Protecting the Floor......................................................14
2.4. Safety Distances...........................................................14
2.5. Adjustable Legs.............................................................14
2.6. Connecting the Stove to a Masonry Flue..................14
2.7. Connecting the Stove to a Harvia Steel Chimney....15
2.8. Changing the Opening Direction of the Stove Door15
3. INSTRUCTIONS FOR USE..................................15
3.1. Preparing the Stove for Use....................................... 15
3.2. Burning Material.......................................................... 15
3.3. Sauna Stones................................................................16
3.4. Heating the Stove.........................................................16
3.5. Sauna Water..................................................................17
3.6. Maintenance..................................................................17
3.7. Troubleshooting............................................................ 17
ACCESSORIES...................................................... 28
GUARANTEE........................................................ 29
MONTAGEILLUSTRATIONEN................................... 4
WARNUNGEN UND HINWEISE.............................. 19
1. ALLGEMEINES..................................................22
1.1. Technische Daten..........................................................22
2. INSTALLATIONSANLEITUNG............................. 22
2.1. Vor der Montage...........................................................22
2.2. Belüftung der Saunakabine........................................23
2.3. Bodenschutz ................................................................ 23
2.4. Sicherheitsabstände.....................................................23
2.5. Verstellbare Füße des Ofens....................................... 23
2.6. Anschluss des Ofens an einen gemauerten
Rauchfng........................................................................ 23
2.7. Anschluss des Ofens an einen
Harvia-Edelstahlschornstein.......................................24
2.8. Änderung der Öffnungsrichtung der Ofentür........... 24
3. BEDIENUNGSANLEITUNG................................. 24
3.1. Vorbereiten des Ofens zur Benutzung...................... 24
3.2. Brennmaterial...............................................................24
3.3. Saunaofensteine...........................................................25
3.4. Heizen des Ofens..........................................................25
3.5. Saunawasser................................................................. 26
3.6. Wartung......................................................................... 26
3.7. Störungen......................................................................27
ZUBEHÖR............................................................ 28
GARANTIE........................................................... 29

Suoritustasoilmoitus
Declaration of Performance
Leistungserklärung
DoP1718Pro
Tuotteen tyyppi
Product type
Produkttyp
Linear 18 Compact
Harvia Finland Oy
PL 12 (Teollisuustie 1–7)
40951 Muurame
Finland
Käyttö
Intended use
Vorgesehene Verwendung
Jatkuvalämmitteiset saunan kiukaat, polttoaineena puu
Multi firing sauna stoves fired by solid wood fuel
Mehrfach befeuerbare Saunaöfen Verwendung von naturbelassenem Scheitholz
Standardit, jotka tuote täyttää
The product conforms to the following standards
Das Produkt erfüllt die folgenden Standards
Tuotteet on tyyppitestattu standardin EN 15821:2010 mukaisilla testausmenetelmillä
Products are tested in accordance to the methods described in the standard EN 15821:2010
Die Produkte sind gemäß den in Standard EN 15821:2010 beschriebenen Prüfverfahren typengetestet
Ilmoitettu laitos (identifiointinumero)
Notified body (identification number)
Gemeldete Stelle (Identifikationsnummer)
TÜV SÜD Industrie Service GmbH, D-80399 München, Germany (0036)
Ilmoitetut suoritustasot/Declared performance/Erklärte Leistung
Perusominaisuudet
Essential characteristic
Wesentliche Merkmale
Suoritustaso
Performance
Leistung
Yhdenmukaistettu tekninen eritelmä
Harmonised technical specification
Harmonisierte technische Spezifikation
Suojaetäisyydet palaviin aineisiin (mm)
Safety distances to combustible materials (mm)
Sicherheitsabstände zu brennbaren Materialien (mm)
EN 15821:2010
kattoon
to ceiling
zur Decke
> See Safety distances
> Siehe Sicherheitsabstände
sivuille
to sides
seitlich
> See Safety distances
> Siehe Sicherheitsabstände
eteen
to front
nach vorne
taakse
to back
nach hinten
Paloturvallisuus (ympäristön rakenteiden syttymisriski)
Fire safety (initiation, risk to adjacent elements)
Brandsicherheit (Brandgefahr der angrenzenden Bauteile)
Hyväksytty
Pass
Erfüllt
Palamiseen vaikuttavien osien vaatimuksenmukaisuus
Emission of combustible products
Emission von unbrennbaren Stoffen
Hyväksytty
Pass
Erfüllt
Pintalämpötila
Surface temperature
Oberflächentemperatur
Hyväksytty
Pass
Erfüllt
Vaarallisten aineiden päästö
Release of dangerous substances
Abgabe gefährliche Stoffe
22
Puhdistettavuus
Cleanability
Reinigungsmöglichkeit
Hyväksytty
Pass
Erfüllt
Savukaasun lämpötila*
Flue gas temperature*
Abgastemperatur*
280 °C
Mekaaninen kestävyys
Mechanical resistance
Mechanische Beständigkeit
Hyväksytty
Pass
Erfüllt
Lämmöntuottoteho saunahuoneeseen
Sauna room heating output
Thermische Leistung
14,3 kW
Hiilimonoksidipäästö 13 % O 2
Carbon monoxide emission at 13 % O2
CO-emission 13 % O
2
1144 mg/m3
Hiilimonoksidipäästö (%) 13 % O 2
Carbon monoxide emission (%) at 13 % O2
CO-emission (%) 13 % O2
0,092 %
Hiukkaspäästö 13 % O2
Dust emission at 13 % O2
Staub 13 % O
2
27 mg/m3
Hyötysuhde
Total efficiency
Wirkungsgrad
74,3 %
Savukanavan veto*
Flue draught*
Förderdrück*
12 Pa
Polttoaineen lisäysmäärä
Refuelling loads
Brennstoffaufgabemenge
2,9 kg
Kestävyys
Durability
Dauerhaftigkeit
Hyväksytty
Pass
Erfüllt
Savukaasun massavirtaus*
Flue gas mass flow*
Rauchgasmassenstrom*
16,7 g/s
* Tulitilan luukku suljettuna/Stove door closed/Tür geschlossen
Muurame, Finland, 10.10.2022 Timo Harvia
Teknologiajohtaja / CTO
[email protected]
[phone]
> See Safety distances
> Siehe Sicherheitsabstände
> See Safety distances
> Siehe Sicherheitsabstände
NPD

4
A
C
D
E
B
F
ZTS-36
WX048
ZKIP-720
ZKIP-140
C
WX525
EN INSTALLATION IMAGES
DE MONTAGEILLUSTRATIONEN
EN: 1. Stove parts DE: 1. Ofenteile
EN: 2. Combustion air channels DE: 2. Verbrennungsluftkanäle
AUpper connection opening Obere Anschlussöffnung
BRear connection opening Hintere Anschlussöffnung
CSoot opening Rußöffnung
DStove door Ofentür
EAsh box Aschekasten
FTool for opening and closing the stove
door and ash box
Das Werkzeug zum Öffnen und Schließen
von Ofentür und Aschekasten.

5
EN: 3. Ventilation of the Sauna Room DE: 3. Belüftung der Saunakabine
B
AØ50–100
B
500
AØ50–100
Gravity exhaust ventilation
Schwerkraftentlüftung
Mechanical exhaust ventilation
Mechanische Entlüftung
EN: 4. Protecting the floor DE: 4. Bodenschutz
A
Concrete floor without tiles. The stove can be installed on
a concrete floor without any specific safety measures, if the
concrete is at least 60 mm thick. Make sure that there are no
wires or water pipes in the concrete cast below the stove.
Betonboden ohne Fliesen. Auf Betonboden kann der Ofen
ohne besondere Sicherheitsmaße aufgebaut werden, solange
der Beton mindestens 60 mm dick ist. Vergewissern Sie sich,
dass sich in dem Beton unter dem Ofen weder elektrische
Kabel noch Wasserleitungen befinden.
B
Tile floor. The floor glues and plasters and waterproof
materials used below the tiles are not resistant to the heat
radiation of the stove. Protect the floor with the Harvia
protective bedding or similar heat radiation protection.
Fliesenboden. Die unter den Fliesen benutzten Klebstoffe,
Mörtel und wasserfesten Materialien können der
Wärmestrahlung des Ofens nicht standhalten. Schützen
Sie den Boden mit der Schutzplatte von Harvia oder einem
ähnlichen Hitzeschutz.
C
Floor made of inflammable material. Protect the floor with
the Harvia protective bedding. If the floor in front of the stove
door is made of inflammable material, install floor protection
made of nonflammable material.
Boden aus brennbarem Material. Schützen Sie den Boden
mit der Schutzplatte von Harvia Wenn der Untergrund auf der
Seite der Ofentür aus brennbaren Material ist, bringen Sie an
dieser Stelle einen Schutz aus feuerfestem Material an.
› 2.2.
› 2.3.

6
See WARNINGS AND NOTES!
Siehe WARNUNGEN UND HINWEISE!
EN: 5. Safety distances DE: 5. Sicherheitsabstände
min. 1300
min.
92
min.
92
min.
300
min.
300
min. 50
min.
50
min.
92
min.
92
min. 100
min.
100
min.
100
min.
50
A
C
B
C
B
A
Ceiling.
The minimum safety distance between the stove and the
ceiling is 1300 mm.
Dach.
Der Mindest-Sicherheitsabstand zwischen Ofen und Dach
beträgt 1300 mm.
B
Masonry walls.
Leave 50 mm between the stove and walls, provided that the
air can circulate in front and to one side of the stove. If the
stove is installed in a recessed wall, leave 100 mm between
the stove and walls for the air circulation.
Gemauerte Wände.
Lassen Sie 50 mm zwischen Ofen und Wänden, vorausgesetzt,
die Luft kann vor dem Ofen und auf einer Seite zirkulieren.
Wenn der Ofen in eine Nische eingebaut wird, lassen Sie
für die Luftzirkulation zwischen dem Ofen und den Wänden
100 mm Platz.
C
Walls and benches made of inflammable materials.
The minimum safety distances to inflammable materials:
92 mm on either side, 92mm behind the stove, 300 mm in
the front.
Wände und Liegen aus brennbarem Material. Mindest-
Sicherheitsabstand von brennbaren Materialien: 92 mm auf
beiden Seiten, 92mm hinter dem Ofen und 300 mm davor.

7
EN: 6. Rear connection opening DE: 6. Die hintere Anschlussönung
560
EN: 7. Upper connection opening DE: 7. Die obere Anschlussönung
› 2.6.
› 2.6.

8
EN: 10. Connecting the stove to a masonry
flue via the upper connection opening
DE: 10. Anschluss des Ofens an einen
gemauerten Rauchfang über die obere
Anschlussönung
560
EN: 9. Connecting the stove to a masonry
flue via the rear connection opening
DE: 9. Anschluss des Ofens an einen
gemauerten Rauchfang über die
hintere Anschlussönung
~50 ~50
C
A
B
D
E
F
VL22l VL22l
EN: 8. Locations of upper and rear
connection openings
DE: 8. Position der oberen und hinteren
Anschlussönungen
(mm) A B C
n./ca
D
n./ca
E
n./ca
F
n./ca
Linear 18 Compact 670 120 850 980 1410 1540
› 2.6.
› 2.6.

9
EN: 11. Connecting the stove to a Harvia
steel chimney
DE: 11. Anschluss des Ofens an einen
Harvia-Edelstahlschornstein
EN: 12. Changing the Opening Direction of
the Stove Door
DE: 12. Änderung der Önungsrichtung der
Ofentür
EN: 13. Sauna Stones DE: 13. Saunaofensteine
Place the larger stones at the bottom and the smaller ones on
the top.
Legen Sie die größeren Steine nach unten und die kleineren nach
oben.
Make sure that air circulates between the stones. Zwischen den Steinen muss Luft zirkulieren können.
Do not place stones against the frame around the stone space or
on top of it.
Legen Sie keine Steine gegen oder auf das Rost um die
Steinkammer herum.
Do not place stones between the grille and the stove body! Legen Sie keine Steine zwischen den Rost und den Ofenkorpus!
max. 0 mm
› 2.7.
› 3.3.
› 2.8.

10
EN
READ THE WARNINGS AND MANUAL CAREFULLY BEFORE USING THE PRODUCT!
INSTALLATION AND MAINTENANCE
The sauna stove is designed for the heating of a sauna room to bathing temperature. It is not to be
used for any other purpose!
WARNING! It is absolutely necessary to install the heater according to values stated in the instruc-
tions of installation and use. Neglecting them causes a risk of fire.
WARNING! Before installing the stove make sure that all safety distance requirements are
fulfilled. There shall be no electrical devices, wires or inflammable materials within the established
safe-ty distances around the stove.
WARNING! Verify the safety distances required for the chimney and accessories from the product's
installation instructions!
• NOTE! Before actual use, a wood-burning stove must be heated in a particular way as explained below.
The purpose of the first heating procedure is to burn off the protective paint on the wood-burning
stove. As this results in a lot of smoke, do it outdoors! Once the stove has cooled down, remove any
residual paint mechanically e.g. with a wire brush and a vacuum cleaner.
• All local regulations, including those referring to national and European standards need to be complied with
when installing the appliance.
• The local fire authorities in charge of approving the installations can provide more detailed information about
fire safety regulations.
• The device must be installed in such a way that the warning texts are easy to read after installation.
• The stove shall be installed on a floor with an adequate load-bearing capacity. If the existing floor does not
meet this prerequisite, suitable measures (e.g. load distributing plate) shall be taken to achieve it.
• Light-coloured floor materials will become dirty from the ash, particles of stone and metal flakes that fall from
the stove. Use floor coverings made of dark materials and dark joint grouts.
• Before installation, ensure unimpeded access for cleaning the stove and sweeping the chimney.
• The stove is not suitable for installation in a shared flue system.
• Arrange for adequate ventilation in the sauna room by ensuring that the intake or exhaust air openings cannot
be blocked accidentally.
• If a guardrail is made around the heater, the safety distances specified in the instructions of installation and
use manual must be observed.
• If suitable accessories are installed in the device, follow the accessory-specific operating and installation
instructions!
• The adjustable feet could scratch the floor surface if the stove is moved on the floor.
• Do not push the flue connection pipe too far into the flue, as the flue may become blocked.
• Seal the flue connection pipe to the opening in the fireproof wall with e.g. fireproof mineral wool.
• Use protective gloves when piling the stones.
• Rinse any stone dust off the stones before placing them in the heater.
• Ceramic ‘stones’ and soft soapstone are not allowed.
• Do not drop stones in to the stone space.
• Do not stack the stones too tightly to allow air to circulate between them.
EN WARNINGS AND NOTES

11
EN
• Do not pile a stack of stones on the heater.
• No such objects or devices should be placed inside the heater stone space or near the heater that could
change the amount or direction of the air flowing through the heater.
• Direct heat radiation from any uncovered stove body, owing to incorrect stone placement, can cause the
materials to become dangerously hot even outside the safety distances.
• Pile the stones or replace the broken stones with new ones at least every year.
• The fireplace, the flue, and the connection pipes should be swept at regular intervals by a qualified
professional.
• The flue and the connection pipes must be swept at regular intervals and especially when the stove has not
been used for a long time.
• Incomplete combustion and neglected sweeping may result in the build-up of soot in that flue that may ignite.
Please see the instructions in case of a chimney fire.
• Only use replacement parts recommended by the manufacturer.
• Modification of the wood-burning stove is prohibited without permission from the manufacturer.
INSTRUCTIONS FOR USE AND BATHING
WARNING! Prolonged, intense heating may cause risk of fire!
Do not cover!
• WARNING! Beware of hot heater. The stones and metal parts of the heater may burn the skin.
• Keep children away from the stove.
• Before heating the stove make sure that there are no unnecessary items in the sauna or inside
the stove’s safety distances. Ext-ractor fans when operated in the same space as the stove, may cause
problems.
• Ensure adequate ventilation during the first few times you heat the sauna.
• Note! The handles become hot while in use. Use the supplied tool for opening and closing the stove door and
ash box
• Do not burn the following materials in the stove: Burning materials that have a high thermal value (such as
chipboard, plastic, coal, brickets, pellets), painted or impregnated wood, waste (such as PVC plastic, textiles,
leather, rubber, disposable diapers), garden waste (such as grass, leaves), liquid fuel.
• Place the firewood into the fire chamber, leaving enough room for the combustion air to flow between the
firewood. Place the biggest pieces of wood on the bottom and the smaller ones on the top.
• Place the kindling on the top of the firewood. After kindling, close the door. If necessary, adjust the draft by
opening the ash box.
• Observe the correct wood quantities and sizes in the instructions. If necessary, allow the wood-burning stove,
the flue and the sauna room to cool down.
• The ash box of the wood-burning stove should always be emptied before heating.
• As the removed ash may include hot embers, do not keep the ash container close to combustible material.
• The wood-burning stove should not be used with the stove door open!
• Ensure sufficient ventilation and combustion air by making sure that openings for them cannot be blocked
accidentally.
• The natural draft variation caused by the seasons and weather conditions can be compensated for by adjusting
the position of the ash box.
• Excessive draft will cause the whole stove body to become red-hot, which will shorten its life span
considerably.
• During bathing and when the sauna room is already heated, the ash box can be closed altogether or kept only
slightly open to reduce combustion and wood consumption.
• Throw sauna water on the stones only. If you throw water on the hot steel surfaces, they may blister due to
the large temperature variation.
• Staying in the hot sauna for long periods of time makes the body temperature rise, which may be dangerous.

12
EN
• Do not throw or pour too much water on the heater at once, boiling water may splash on bathers.
• Never throw water on the stones when there are people near the heater.
• The maximum volume of the ladle is 0.2 litres.
• Do not throw any other water on the heater than that specified in the instructions manual of the heater.
• Only special aromas designed for sauna water may be used according to their instructions.
• Do not let young, handicapped or ill people bathe in the sauna on their own.
• Consult your doctor about any health-related limitations to bathing.
• Consult your child welfare clinic about taking little babies to the sauna.
• Be very careful when moving in the sauna, as the platform and floors may be slippery.
• Never go to a hot sauna if you have taken alcohol, strong medicines or narcotics.
• Never sleep in a hot sauna.
• Sea air and a humid climate may corrode the metal surfaces of the heater.
• Do not hang clothes to dry in the sauna, as this may cause a risk of fire.
• Particles disintegrating from the sauna stones may damage sensitive floor coverings and cause fire hazard.
Actions to be taken in case of a chimney fire:
1. Close the ash box, stove door and damper plate (if installed).
2. Contact local fire authority.
3. Do not try to extinguish fire using water.
4. After a sootfire, a chimney sweeper must check the stove and the flue before use
Actions to be taken in the event of a wood-burning stove malfunction, such as overheating:
1. If a malfunction results in a fire, call the fire brigade.
2. Close the ash box and the fire chamber door.
3. Use water to cool any structures that are at risk of catching fire.
4. Cool the exterior of the stove with water.
5. Keep an eye on the stove until it has cooled down completely.
6. After a malfunction, both the fireplace and the flue must be checked before heating the sauna again.

13
EN
EN 2. INSTRUCTIONS FOR INSTALLATION
See WARNINGS AND NOTES!
See INSTALLATION IMAGES!
2.1. Before Installation
Before installing the stove make sure that all safety distance requirements are fulfilled. There shall
be no electrical devices, wires or inflammable materials within the established safety distances
around the stove.
• All local regulations, including those referring to national and European standards need to be complied with when
installing the appliance.
• The stove is not suitable for installation in a shared flue system.
• Verify the safety distances required for the chimney and accessories from the product's installation instructions!
• The local fire authorities in charge of approving the installations can provide more detailed information about fire
safety regulations.
EN 1. GENERAL
Choose the stove model carefully. A stove with too low output must be heated longer and more intensely,
which will shorten the stove’s life span.
Please note that non-insulated wall and ceiling surfaces (such as brick, glass, tile and concrete surfaces) increase
the output requirement of the stove. For every square meter of such wall and ceiling surface you should calculate
an additional 1.2 m3 volume. If the sauna walls are made of massive log, the volume must be multiplied by 1.5.
Examples:
• A 10 m3 sauna room with a brick wall 2 m high and 2 m wide is equivalent to a sauna room of approximately
15 m3.
• A 10 m3 sauna room with a glass door is equivalent to a sauna room of approximately 12 m3.
• A 10 m3 sauna room with massive log walls is equivalent to a sauna room of approximately 15 m3.
The dealer or our factory representative can assist you in choosing the stove if needed. You can also visit our website
www.harvia.com for further details.
1.1. Technical Data
Linear 18 Compact
Sauna room volume (m³) 5-18
Required temperature class of chimney T600
Diameter of connection opening (mm) 115
Stone quantity (max. kg) 40
Stone size (cm) Ø10–15
Weight (kg) 60
Width (mm) 450
Depth + fire chamber extension (mm) 510
Height + adjustable legs (mm) 770 + 0–30
Thickness of fire chamber cover (mm) 10
Maximum length of firewood (cm) 39
Diameter of firewood (cm) 8–15
Water container volume (l) –

14
EN
2.2. Ventilation of the Sauna Room › Image 3
The ventilation of the sauna room should be arranged as follows:
Gravity exhaust ventilation
A. The fresh air inlet must be placed close to the floor near the stove and
B. its outlet should be as far as possible from the stove and near the ceiling. The stove itself circulates air effectively;
the purpose of the outlet is mainly to remove moisture from the sauna after bathing.
Mechanical exhaust ventilation
A. The fresh air inlet must be approx. 500 mm above the stove and
B. the outlet should be close to the floor, for example, below the bench.
2.3. Protecting the Floor › Image 4
See Warnings and notes!
2.4. Safety Distances › Image 5
See Warnings and notes!
2.5. Adjustable Legs
The adjustable legs enable the stove to be installed firmly on an inclined floor. The adjustable range is 0–30 mm.
Unscrew the adjustable feet to an extent that allows them to be adjusted using a wrench (17 mm) when the stove is in
position. The adjustable feet could scratch the floor surface if the stove is moved on the floor.
2.6. Connecting the Stove to a Masonry Flue › Images 6-10
Make an opening in the fireproof wall for the flue connection. Notice that the opening has to be at the correct height,
if you intend to use, for instance, a protective bedding. The hole should be slightly larger than the flue connecting
pipe. A suitable gap around the connection pipe is ca. 10 mm. It is advisable to round off the inner corners of the flue
opening to ensure that the combustion gases can flow freely to the flue. Additional accessories are available to make
the installation easier ( › Accessories).
Connecting the stove to a masonry flue via the rear connection opening › Images 6, 9
1. Open the cover hatches of the rear connection opening
2. Attach the flue connection pipe to the rear connection opening. Ensure that the pipe fits tightly in place.
3. Push the stove into place. Do not block the flue by pushing the flue connection pipe too far into the flue. If
necessary, shorten the pipe.
4. Seal the flue connection pipe to the opening in the fireproof wall, for example, by using fireproof mineral wool.
Make sure that the flue connection is tightly sealed. Add more fireproof mineral wool if necessary.
Connecting the stove to a masonry flue via the upper connection opening › Images 6-8, 10
You will need an angled smoke pipe (45° or 90°) for the upper connection ( › Accessories).
1. Open the cover hatches of the rear connection opening.
2. Move the blocking plug from the upper connection opening to the rear connection opening.
3. Turn the cover hatches back up and lock it in its position with a screw.
4. Attach the flue connection pipe to the upper connection opening. Ensure that the pipe fits tightly in place.
5. Push the stove in place. Do not block the flue by pushing the flue connection pipe too far into the flue. If necessary,
shorten the pipe.
6. Seal the flue connection pipe to the opening in the fireproof wall, for example, by using fireproof mineral wool.
Make sure that the flue connection is tightly sealed. Add more fireproof mineral wool if necessary.

15
EN
2.7. Connecting the Stove to a Harvia Steel Chimney › Images 6-8, 11
A CE-marked Harvia steel chimney can be used to remove combustion gases. Its smoke pipes are made of stainless
steel and the chimney has been insulated for fire safety. The chimney has a round cross section. The smoke pipe
diameter is 115 mm, and the outer casing is 220 mm.
1. Open the cover hatches of the rear connection opening.
2. Move the blocking plug from the upper connection opening to the rear connection opening.
3. Turn the cover hatches back up and lock it in its position with a screw.
4. Connect the steel chimney’s smoke pipe to the upper connection opening of the stove. Ensure that the smoke pipe
fits tightly in place. See the detailed instructions in the steel chimney’s installation instructions!
If a protective cover is used around the stove, the insulation of the chimney must start from the
same level as the top surface of the protective cover or underneath it. (Image 11).
2.8. Changing the Opening Direction of the Stove Door › Image 12
The door to the firing chamber can be installed to open either to the right or to the left.
EN 3. INSTRUCTIONS FOR USE
See WARNINGS AND NOTES!
See INSTALLATION IMAGES!
3.1. Preparing the Stove for Use
Perform the first heating outdoors. The stove body has been painted with protective paint, which will vaporise during
the first heating. This will cause the stove body to emit smoke. When the smoking stops, the stove is ready for normal use.
Install the smoke pipes for draught. This will cause odours to vaporize from the smoke pipes as well. The outer
casing has been painted with heat-resistant paint, which reaches its final cured state during the first heating. Prior to
this, rubbing or sweeping the painted surfaces of the stove must be avoided.
• The sauna stones should not be placed in the stove before the first heating. Place the stones in the stove only
when the stove has cooled completely after the first heating.
• Stove with a water container: Clean the water container carefully prior to use. Fill up the water container prior to
the first heating.
• NOTE! Do not throw water on the stove during first heating. Painted surfaces can get damaged!
3.2. Burning Material
Dry wood is the best material for heating the stove. Dry chopped firewood clinks when it is knocked together with
another piece. The moisture of the wood has a significant impact on how clean the burning is as well as on the
efficiency of the stove. You can start the fire with birch bark or newspapers.
The thermal value of wood differs from one type of wood to another. For example, you must burn 15 % less beech
than birch to obtain the same heat quantity. If you burn large amounts of wood, which has a high thermal value, the
life span of the stove will shorten!
Do not burn the following materials in the stove:
• Burning materials that have a high thermal value (such as chipboard, plastic, coal, brickets, pellets)
• Painted or impregnated wood
• Waste (such as PVC plastic, textiles, leather, rubber, disposable diapers)
• Garden waste (such as grass, leaves)
• Liquid fuel

16
EN
3.3. Sauna Stones › Image 13
See Warnings and notes!
Correctly chosen and properly laid sauna heater stones ensure a long service life and the best possible sauna bath.
Sauna heater stones are significant in terms of the unit’s safety. In order for the warranty to remain valid, the user is
responsible for proper maintenance of the stone space in accordance with the specifications and instructions.
Important information on suitable sauna stones:
• The stones should be 10–15 cm in diameter.
• Suitable sauna stone materials are peridotite, olivine diabase, olivine, and vulcanite.
• Only proper stones meant for the specific purpose should be used as sauna stones. Stones found in nature may
contain harmful substances, such as iron pyrite, and therefore should not be used.
• Only use cleavage surface and/or rounded stones for your sauna heater.
• Ceramic stones and decorative stones may only be used if they have been approved by the manufacturer and are
used according to their instructions.
• Note that decorative stones are only suitable on the top layer of the stone space.
• Decorative stones must be placed loosely to ensure sufficient air circulation.
• Place any decorative stones so that they do not touch stove’s hot inner frame.
• The warranty does not cover any defects that have been caused by the use of decorative stones or by sauna stones
not recommended by the manufacturer.
• Wash off dust from the stones before piling them into the stove.
3.4. Heating the Stove
1. Empty the ash box.
2. Place the firewood into the fire chamber, leaving enough room for the combustion air to flow between
the firewood. Place the biggest firewood on the bottom and the smaller ones on the top. Use firewood with a
diameter of 8–12 cm (consider the refuelling loads value).
3. Place the kindling on the top of the firewood. By starting the fire on the top of the firewood, fewer emissions
are produced.
4. Fire the kindling and close the door. The amount of draught can be adjusted by opening the ash box. The stove
is not intended for use with the stove door open.
Note! The handles become hot while in use. Use the supplied tool for opening and closing the stove door
and ash box › Image 1.
- When heating the stove, it is generally a good idea to at first keep the ash box slightly open. This ensures that the
fire starts burning properly.
- Excessive draught will cause the stove body to become red-heated, which will shorten its life span considerably.
- During bathing, and when the sauna room is already heated, the ash box can be closed to keep down the fire and
decrease wood consumption.
Note! The values in the CE marking have been measured using a gap of 45mm in the ash box. Do not
open ash box more than 70 mm.
5. If necessary, place more firewood into the fire chamber when the ember is dying down. Use firewood with
a diameter of 12–15 cm. It takes only a couple of pieces of wood to maintain the bathing temperature (consider
the refuelling loads value)
WARNING! Prolonged, intense heating may cause risk of fire!
• Excessive heating (several full loads in a row, for example) will make the sauna room, stove and the
chimney overheat. Overheating shortens the stove’s life span and may cause risk of fire.
• A good rule of thumb is that temperatures of over 100ºC are too high in a sauna.
• Observe the correct wood quantities noted in the heating instructions. Let the stove, chimney and sauna
room cool down if necessary.

17
EN
3.5. Sauna Water
The water to be thrown on the heated stones should meet the requirements of clean household water. Only special
aromas designed for sauna water may be used. Follow the instructions given on the package. Throw sauna water on
the stones only. If you throw water on the hot steel surfaces, they may blister due to the large temperature
variation!
Water properties Effect Recommendation
Humus concentration Colour, taste, precipitates <12 mg/l
Iron concentration Colour, odour, taste, precipitates <0,2 mg/l
Manganese (Mn) concentration Colour, odour, taste, precipitates <0,10 mg/l
Hardness: most important substances are
magnesium (Mg) and lime, i.e. calcium (Ca)
Precipitates Ca: <100 mg/
Chloride-containing water Corrosion Cl: <100 mg/l
Chlorinated water Health risk Forbidden to use
Seawater Rapid corrosion Forbidden to use
Arsenic and radon concentration Health risk Forbidden to use
3.6. Maintenance
Stove
• The ash box should always be emptied before heating the stove so that the combustion air that is lead through
the box would cool off the fire grate and lengthen its life span. Get a metal container, preferably standing model,
to put the ash in. As the removed ash may include hot embers, do not keep the ash container close to combustible
material.
• Soot and ashes gathered in the smoke canals of the stove should be removed occasionally through the soot
openings.
• Due to large variation in temperature, the sauna stones disintegrate in use. Therefore, they should be rearranged
at least once a year or even more often if the sauna is in frequent use. At the same time, any pieces of stones
should be removed from the stone space, and disintegrated stones should be replaced with new ones.
• Wipe dust and dirt from the stove with a damp cloth.
Chimney
• The chimney and connection pipes should be swept at regular intervals and especially if the stove has not been
used in a long time.
• Due to incomplete burning of fuel and failure of sweeping the chimney, the soot build-up in the flue may ignite.
Actions to be taken in case of a chimney fire:
• Close the ash box, stove door and damper plate (if installed).
• Contact local fire authority.
• Do not try to extinguish fire using water.
• After a sootfire, a chimney sweeper must check the stove and the flue before use.
3.7. Troubleshooting
There is no draught in the flue. Smoke comes into the sauna.
• There are leaks in the flue connection. Seal the connection (› Connecting the Stove to a Masonry Flue).
• The brick flue is cold.
• There is low pressure caused by an extractor fan or another device in the room. Make sure there is enough air to
compensate.
• Several fireplaces are used at the same time. Make sure there is enough air to compensate.
• The ash box is full.
• The smoke canals of the stove are blocked ( › Maintenance).
• The flue connection pipe is too deep in the chimney ( › Connecting the Stove to a Masonry Flue).

18
EN
The sauna does not heat up.
• The sauna is too big in relation to the stove’s heating capacity ( › Technical Data).
• There is lots of non-insulated wall surface in the sauna ( › General).
• The burning material is moist or its quality is otherwise low ( › Burning Material).
• The flue does not have a good draught.
• The smoke canals of the stove are blocked ( › Maintenance).
The stove stones do not heat up.
• The sauna is too small in relation to the stove’s heating capacity ( › General).
• The flue does not have a good draught.
• The burning material is moist or its quality is otherwise low ( › Burning Material).
• The smoke canals of the stove are blocked ( › Maintenance).
• Check the stone placement ( › Sauna Stones). Remove the small pieces of stone and stones that are less than 10
cm in diameter from the stone space. Replace the disintegrated stones with large and undamaged ones.
The stove emits smell.
• See section › Preparing the Stove for Use
• The hot stove may emphasize odours mixed in the air that are not, however, caused by the sauna or the stove.
Examples: paint, glue, oil, seasoning.
Wooden surfaces of the sauna room blacken
• It is perfectly normal for the wooden surfaces of the sauna room to blacken in time. The blackening may be
accelerated by sunlight, heat from the stove, protective agents on the walls (protective agents have a poor heat
resistance level), fine particles disintegrating from the sauna stones which rise with the air flow and smoke that
enters the sauna, for example, when adding firewood.

19
DE
LESEN SIE DIE WARNUNGEN UND DIE BEDIENUNGSANLEITUNG SORGFÄLTIG DURCH, BEVOR SIE
DAS PRODUKT VERWENDEN!
INSTALLATION UND WARTUNG
Der Saunaofen ist für die Beheizung einer Saunakabine auf Badetemperatur ausgelegt. Er darf nicht
für andere Zwecke verwendet werden.
WARNUNG! Es ist unbedingt erforderlich, dass der Saunaofen gemäß den in der Installations- und
Bedienungsanleitung angegebenen Werten installiert wird. Bei Nichtbeachtung besteht Brandgefahr.
WARNUNG! Sorgen Sie vor der Montage des Ofens dafür, dass alle Anforderungen bezüglich der
Sicherheitsabstände eingehalten werden. Innerhalb des Sicherheitsabstands um den Ofen herum
dürfen sich keine elektrischen Geräte, Kabel oder brennbare Materialien befinden.
WARNUNG! Überprüfen Sie die erforderlichen Sicherheitsabstände für den Rauchfang und das
Zubehör anhand der Installationsanleitung für das Produkt.
• HINWEIS! Vor dem eigentlichen Gebrauch muss ein holzbeheizter Saunaofen wie unten beschrieben auf
eine bestimmte Weise aufgeheizt werden. Das erste Aufheizen dient dazu, den Schutzlack am Saunaofen
abzubrennen. Da dabei viel Rauch entsteht, sollten Sie dies im Freien tun! Entfernen Sie nach dem
Abkühlen des Saunaofens eventuell vorhandene Farbreste mechanisch, z.B. mit einer Drahtbürste und
einem Staubsauger.
• Alle ortsüblichen Vorschriften, inbegriffen derer, die sich auf staatliche oder europäische Stan-dards beziehen,
müssen bei der Installation der Feuerstelle berücksichtigt werden.
• Nähere Informationen zu Brandschutzbestim-mungen erhalten Sie von den örtlichen Be-hörden, die für die
Genehmigung der Einbauten zuständig sind.
• Der Ofen muss so eingebaut werden, dass die Warntexte nach dem Einbau gut lesbar sind.
• Der Ofen muss auf einem Untergrund mit ausreichender Tragfähigkeit installiert werden. Wenn der
vorhandene Boden diese unverzichtbare Bedingung nicht erfüllt, muss mit entsprechenden Mitteln
nachgeholfen werde n (z.B. Einsatz von Platten zur Gewichtsverteilung).
• Helle Böden werden durch Asche, Steinpartikel und aus dem Ofen fallende Metallsplitter verunreinigt.
Verwenden Sie Bodenabdeckungen aus dunklen Materialien und dunkle Zementschlämme.
• Stellen Sie vor der Installation sicher, dass der Zugang zum Reinigen des Saunaofens und zum Ausfegen des
Rauchfangs ungehindert möglich ist.
• Ein holzbeheizter Saunaofen kann nicht an einen gemeinsamen Rauchabzug angeschlossen werden.
• Sorgen Sie für eine ausreichende Belüftung der Saunakabine, indem Sie sicherstellen, dass die Zu- oder
Abluftöffnungen nicht versehentlich blockiert werden können.
• Wenn ein Geländer um den Ofen herum angebracht wird, müssen die in der Montage- und
Gebrauchsanweisung angegebenen Sicherheitsabstände eingehalten werden.
• Falls geeignetes Saunazubehör im Gerät verbaut ist, beachten Sie die zubehörspezifischen Bedienungs- und
Montageanleitungen!
• Die verstellbaren Füße können die Bodenoberfläche zerkratzen, wenn der Ofen auf dem Boden bewegt wird.
• Schieben Sie das Abzugsanschlussrohr nicht zu weit in den Rauchabzug, da dieser sonst verstopft werden
kann.
• Das Abzugsanschlussrohr zur Öffnung in der Brandschutzwand z.B. mit feuerfester Mineralwolle abdichten.
• Tragen Sie beim Aufschichten der Steine Schutzhandschuhe.
• Spülen Sie Staub und Verunreinigungen von den Steinen, bevor Sie sie in den Ofen legen
DE WARNUNGEN UND HINWEISE

20
DE
• Nicht erlaubt sind künstliche Keramiksteine oder Speckstein.
• Schütten Sie nicht alle Steine auf einmal in den Ofen, sondern legen Sie sie einzeln nacheinander an ihren
Platz!
• Stapeln Sie die Steine nicht zu dicht, damit Luft zwischen ihnen zirkulieren kann.
• Stapeln Sie keine überzähligen Steine auf den Ofen.
• Innerhalb der Heizsteinkammer oder in der Nähe des Saunaofens dürfen keine Gegenstände oder Geräte
platziert werden, die die Menge oder Richtung der durch den Ofen strömenden Luft verändern könnten.
• Die direkte Wärmeabstrahlung eines nicht abgedeckten Saunaofenkorpus, kann, bedingt durch falsche
Anordnung der Steine, dazu führen, dass die Materialien auch außerhalb der Sicherheitsabstände gefährlich
heiß werden.
• Schichten Sie die Steine auf oder ersetzen Sie zerbrochene Steine mindestens einmal im Jahr durch neue.
• Der Kamin, der Rauchabzug und die Verbindungsrohre sollten in regelmäßigen Abständen von einem
qualifizierten Fachmann gekehrt werden.
• Der Rauchabzug und die Verbindungsrohre müssen in regelmäßigen Abständen gekehrt werden, insbesondere
wenn der Saunaofen längere Zeit nicht benutzt wurde.
• Unvollständige Verbrennung und vernachlässigtes Kehren können dazu führen, dass sich im Rauchabzug Ruß
ansammelt, der sich entzünden kann. Bitte beachten Sie die Anweisungen im Falle eines Rauchfangbrandes.
• Es dürfen ausschließlich die Ersatzteile des Herstellers verwendet werden.
• Ohne eine Genehmigung des Herstellers dürfen am Ofen keine Änderungen vorgenommen werden.
GEBRAUCHSANWEISUNG UND SAUNABADEN
WARNUNG! Längeres, intensiveres Heizen kann zu einem Brandrisiko führen!
Nicht abdecken!
• WARNUNG! Vorsicht vor dem heißen Saunaofen. Die Steine und Metallteile des Saunaofens können zu
Brandwunden führen.
• Lassen Sie Kinder nicht in die Nähe des Saunaofens kommen.
• Sorgen Sie vor dem Heizen des Ofens da-für, dass sich keine unnötigen Gegenstän-de in der Sauna oder
innerhalb der Sicherheits-abstände des Ofens befinden. Berücksichtigen Sie, dass Abluftsysteme, die im
gleichen Raum mit dem Saunaofen in Betrieb sind, Probleme verursachen können.
• Sorgen Sie für ausreichende Belüftung, wenn Sie die Sauna die ersten Male aufheizen.
• Achtung: Die Türgriffe werden beim An-heizen des Ofens heiß. Verwenden Sie das mit gelieferte Werkzeug
zum Öffnen und Schließen von Ofentür und Aschekasten
• Verbrennen Sie folgende Materialien nicht im Ofen: Brennmaterialien, die einen hohen Wärmewert haben (wie
etwa Spanplatten, Plastik, Kohle, Briketts, Pellets usw.), Lackiertes oder imprägniertes Holz, Abfall (wie etwa
PVC-Plastik, Textilien, Leder, Gummi, Einwegwindeln), Gartenabfälle (wie etwa Gras, Blätter).
• Legen Sie das Brennholz in die Brennkammer und lassen Sie genügend Platz, damit die Verbrennungsluft
zwischen dem Brennholz hindurchströmen kann. Legen Sie die größten Holzstücke nach unten und die
kleineren nach oben.
• Legen Sie das Kleinholz oben auf das Brennholz. Schließen Sie nach dem Anzünden die Tür. Falls notwendig,
können Sie die Zugluft durch Öffnen des Aschekastens anpassen.
• Beachten Sie die richtigen Holzmengen und -größen in der Anleitung. Lassen Sie bei Bedarf den Saunaofen,
den Kamin und die Saunakabine abkühlen.
• Der Aschekasten des Saunaofens sollte vor dem Aufheizen immer geleert werden.
• Da sich heiße Glutstücke in der Asche befinden können, halten Sie den Aschebehälter von brennbaren
Materialien fern.
• Der Saunaofen darf nicht mit geöffneter Ofentür betrieben werden!
• Sorgen Sie für ausreichende Belüftung und Verbrennungsluft und stellen Sie sicher, dass die entsprechenden
Öffnungen nicht versehentlich blockiert werden können.