Hasbro Sega Transformers Shadows Rising User manual
IMPORTANT
• Before using this product, read this manual carefully to understand the
contents herein stated.
• After reading this manual, be sure to keep it near the product or in a
convenient place for easy reference when necessary.
OWNER'S MANUALTRANSFORMERS: SHADOWS RISING 420-0030-00UK
Sega Amusements International Limited.
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: +44 (0) 208 391 8090 Facsimile: +44 (0) 208 391 8099
© SEGA
Errors & Omissions Excepted (E&OE)
420-0030-00UK
1
st
PRINTING
“TRANSFORMERS” IS A
REGISTERED TRADEMARK
OF HASBRO, INC. ALL RIGHTS
RESERVED.
BEFORE USING THE PRODUCT,
BE SURE TO READ THE FOLLOWING:
To maintain safety:
To ensure the safe operation of this product, be sure to read the following before usage:
The following instructions are intended for the users, operators and the personnel in charge of the
operation of the product. After carefully reading and suciently understanding the warning displays
and cautions, handle the product appropriately. Be sure to keep this manual close to the product or
in a convenient place for future reference.
Herein, explanations which require special attention are enclosed with dual lines. Depending on
the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used.
Be sure to understand the contents of the displays before reading the text.
Indicates that mishandling the product by disregarding this pictograph will
cause severe injury or death.
Indicates that mishandling the product by disregarding this warning will cause
a potentially hazardous situation which can result in death or serious injury.
Indicates that mishandling the product by disregarding this caution will cause
a slight hazardous situation which can result in personal injury and/or material
damage.
For the safe usage of the product, the following pictographs are used:
Indicates "HANDLE WITH CARE." In order to protect the human body and equipment,
this display is attached to places where the instruction manual should be referred to.
Indicates a "protective earth terminal." Before operating the equipment, be sure to connect
it to the ground (this step may be omitted for products in which a power cable with earth is
used).
• Perform work in accordance with the instructions herein stated.
Instructions for work are explained by paying attention to the aspect of accident prevention.
Failing to perform work as per the instructions can cause accidents. In the case where only
those who have technical expertise should perform the work to avoid hazardous situation, the
instructions herein state that the site maintenance personnel should perform such work.
To prevent an electric shock, be sure to turn o the power and unplug the power cable before
carrying out any work that requires direct contact with the interior of the product. If the work is
to be performed in the power-on status, the instruction manual herein always states to that eect.
This product is equipped with the earth terminal. When installing the product, connect the earth
terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the
product is grounded appropriately, the user can be subject to an electric shock. After performing
repair, etc. for the control equipment, ensure that the earth wire is rmly connected to the control
equipment.
Using a power supply which is not equipped with the earth leakage breaker can cause a re when
earth leakage occurs.
Using fuses exceeding the specied rating can cause a re and an electric shock.
The parts of the product include warning labels for safety, covers for personal protection, etc. It
is very hazardous to operate the product by removing parts and/or modifying the circuits. Should
doors, lids and protective parts be damaged or lost, refrain from operating the product, and
contact where the product was purchased from or the oce herein stated.
SEGA shall not be held responsible for any accidents or compensation for damage to a third
party resulting from the specications not designated by SEGA.
Before installing the product, check for electrical specications. SEGA products have a
nameplate on which the electrical specications are described. Ensure that the product is
compatible with the power supply voltage and frequency requirements of the location. Using
any electrical specications dierent from the designated specications can cause a re and an
electric shock.
To ensure safety for the customers, labels and printed instructions describing potentially
hazardous situations are applied to places where accidents can be caused. Ensure that where the
product is operated has sucient lighting allowing the warnings to be read. If any label is peeled
o, apply it again immediately. Please place an order with where the product was purchased from
or the oce herein stated.
Some of the monitor parts are subject to high tension voltage. Even after turning o the power,
some portions are still subject to high tension voltage. Monitor repair and replacement should
be performed only by those technical personnel who have knowledge of electricity and technical
expertise.
Do not operate the product leaving on-screen ickering or blurring as it is. Using the product
with the monitor not properly adjusted may cause dizziness or a headache to an operator, a
player, or customer.
* In the case where commercially available monitors and printers are used in this product, only the
contents relating to this product are explained herein. Some commercially available equipment
has functions and reactions not stated in this manual. Read this manual together with the specic
instruction manual of such equipment.
* Descriptions herein contained may be subject to improvement changes without notice.
* The contents described herein are fully prepared with due care. However, should any question
arise or errors be found, please contact SEGA.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately
after transporting to the location. Nevertheless, an irregular situation may occur during
transportation. Before turning on the power, check the following points to ensure that the product
has been transported in a satisfactory status:
Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
Are casters and adjusters damaged?
Do the power supply voltage and frequency requirements meet with those of the location?
Are all wiring connectors correctly and securely connected? Unless connected in the correct way,
connector connections can not be made accurately. Do not insert connectors forcibly.
Do power cables have cuts and dents?
Are all accessories available?
Can all doors and lids be opened with the accessory keys? Can doors and lids be rmly closed?
INTRODUCTION
iii
INTRODUCTION
This manual is intended to provide detailed descriptions together with all necessary information covering the general
operation of electronic assemblies, electromechanical, servicing control, spare parts, etc. for the product:
"TRANSFORMERS: SHADOWS RISING"
This manual is intended for the owners, personnel managers in charge of operation of this product.
Operate the product after carefully reading and suciently understanding the instructions.
In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician
to touch the internal system. Turn o the power to the machine, making sure to unplug the electrical cord from the
outlet, and contact the oce listed below or the point-of-purchase for this product.
Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special
attention are indicated by bold text, the words "STOP, IMPORTANT or CAUTION” and the symbols below.
Indicates important information that, if ignored, may result in the mishandling
of the product and cause faulty operation or damage to the product.
Indicates a warning or caution that, if ignored, may result in the mishandling
of the product and cause faulty operation or damage to the product.
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
European Sales: +44 (0) 208 391 8090 Facsimile: +44 (0) 208 391 8099
STS (Spares): +44 (0) 208 391 8060 Facsimile: +44 (0) 208 391 8096
USA Sales: +00 (1) 224 265 4287
PLAY IT.
252 Beinoris Drive, Wood Dale, IL. 60191, USA
Part Sales: +00 (1) 847-364-9787 ext 102
Tech Support: +00 (1) 847-364-9787 ext 103/113
INTRODUCTION
Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel
or other qualied professionals. This manual includes directions for potentially dangerous procedures which should
only be carried out by professionals with the appropriate specialised knowledge.
The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:
Site maintenance personnel:
Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the super-
vision of the owner/operator of this product to maintain machines within amusement facilities or similar premises by
carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/expendable
parts.
Activities to be carried out by site maintenance personnel:
Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable
parts.
Other qualied professionals:
Persons employed by amusement equipment manufacturers, or involved in design, production, testing or mainte-
nance of amusement equipment. The individual should have either graduated from technical school or hold similar
qualications in electrical/electronics/mechanical engineering.
Activities to be carried out by other qualied professionals:
Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.
Procedures not described in this manual or marked as ‘to be carried out by site
maintenance personnel or other qualied professionals’ should not be carried
out by personnel without the necessary skill or technological experience. Work
carried out by unqualied persons may cause serious accidents, including
electrocution.
SPECIFICATIONS
Standard Cabinet
Machine Dimensions: 1.74m (68.5in) [Width] x 2.12m (83.4in) [Depth]
Machine Height: 2.91m (114.7in) (Installed)
Machine Weight: 499kg Approx (Installed)
Power, maximum current: -340w-
Rating: 1.7A @ 240vac
3.4A @ 120vac
INTRODUCTION
The WEEE (Waste of Electrical and Electronic Equipment) directive places an obligation on all EU based
manufacturers and importers of Electrical and Electronic Equipment (EEE) to ensure waste equipment is disposed of
in accordance with the directive at the end of their useful life.
The symbol shown below will be placed on all products manufactured from 13th August 2005, which indicates this
product must NOT be disposed of with other normal waste. Upon purchasing any EEE from SEGA Amusements
International Ltd. The user accepts responsibility to dispose of their waste equipment by arranging to return it to a
designated UK collection point (AATF) or an Approved Exporter (AE) for the correct recycling of waste electrical
and electronic equipment.
For more information on Approved Authorised Treatment Facilities (AATF) within the UK please consult the
government website www.gov.uk
For users outside of the UK EEE should be disposed of in accordance with the local policy on the recycling of Waste
Electrical and Electronic Equipment.
The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimise the impact of batteries on
the environment and encourage the recovery of the materials they contain. To achieve increased collection and
recycling of waste batteries, the Directive places ‘producer responsibility’ obligations on manufacturers and
importers of portable, industrial and automotive batteries.
The symbol shown below will be on all equipment tted with batteries from 26th September 2008 and indicates
they must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of used
batteries by arranging to return them to a designated collection point for the correct recycling.
For more information about where you can send your waste batteries for recycling contact your local authority
oce.
REGISTERED IN ENGLAND REGISTERED NO. 1711515
REGISTERED OFFICE: BLOCK C 42 BARWELL BUSINESS PARK, CHESSINGTON, SURREY KT9 2NY
THIRD PARTY RIGHTS
LIST OF THIRD PARTY RIGHTS
LUA
Copyright (C) 1994-2008 Lua.org, PUC-Rio.
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation les (the “Software”), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
OR OTHER DEALINGS IN THE SOFTWARE.
THIRD PARTY RIGHTS
TOLUA++
tolua++ is based on toLua (www.tecgraf.puc-rio.br/~celes/tolua), and
it’s licensed under the terms of the MIT license reproduced below.
This means that Lua is free software and can be used for both academic
and commercial purposes at absolutely no cost.
===============================================================================
Copyright (C) 2009 Ariel Manzur.
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation les (the “Software”), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
THIRD PARTY RIGHTS
JSON CPP
The JsonCpp library’s source code, including accompanying documentation,
tests and demonstration applications, are licensed under the following
conditions...
Baptiste Lepilleur and The JsonCpp Authors explicitly disclaim copyright in all
jurisdictions which recognize such a disclaimer. In such jurisdictions,
this software is released into the Public Domain.
In jurisdictions which do not recognize Public Domain property (e.g. Germany as of
2010), this software is Copyright (c) 2007-2010 by Baptiste Lepilleur and
The JsonCpp Authors, and is released under the terms of the MIT License (see below).
In jurisdictions which recognize Public Domain property, the user of this
software may choose to accept it either as 1) Public Domain, 2) under the
conditions of the MIT License (see below), or 3) under the terms of dual
Public Domain/MIT License conditions described here, as they choose.
The MIT License is about as close to Public Domain as a license can get, and is
described in clear, concise terms at:
http://en.wikipedia.org/wiki/MIT_License
The full text of the MIT License follows:
========================================================================
Copyright (c) 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation
les (the “Software”), to deal in the Software without
restriction, including without limitation the rights to use, copy,
modify, merge, publish, distribute, sublicense, and/or sell copies
of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
========================================================================
(END LICENSE TEXT)
The MIT license is compatible with both the GPL and commercial
software, aording one all of the rights of Public Domain with the
minor nuisance of being required to keep the above copyright notice
and license text in the source code. Note also that by accepting the
Public Domain “license” you can re-license your copy using whatever
license you like.
THIRD PARTY RIGHTS
ix
ZLIB
zlib.h -- interface of the ‘zlib’ general purpose compression library
version 1.2.3, July 18th, 2005
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
This software is provided ‘as-is’, without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software
in a product, an acknowledgment in the product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
Jean-loup Gailly Mark Adler
The data format used by the zlib library is described by RFCs (Request for
Comments) 1950 to 1952 in the les http://www.ietf.org/rfc/rfc1950.txt
(zlib format), rfc1951.txt (deate format) and rfc1952.txt (gzip format)..
x
THIRD PARTY RIGHTS
SMAA
Copyright (C) 2011 Jorge Jimenez (jor[email protected])
Copyright (C) 2011 Jose I. Echevarria ([email protected])
Copyright (C) 2011 Belen Masia (bmasia@unizar.es)
Copyright (C) 2011 Fernando Navarro ([email protected])
Copyright (C) 2011 Diego Gutierrez (diegog@unizar.es)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modication, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the following disclaimer
in the documentation and/or other materials provided with the
distribution:
“Uses SMAA. Copyright (C) 2011 by Jorge Jimenez, Jose I. Echevarria,
Tiago Sousa, Belen Masia, Fernando Navarro and Diego Gutierrez.”
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS
IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
The views and conclusions contained in the software and documentation are
those of the authors and should not be interpreted as representing ocial
policies, either expressed or implied, of the copyright holders.
xi
TABLE OF CONTENTS
INTRODUCTION iii
1HANDLING PRECAUTIONS 1
2PRECAUTIONS REGARDING INSTALLATION LOCATION 5
2-1 LIMITATIONS OF USAGE 6
2-2 OPERATION AREA 7
3PRECAUTIONS REGARDING PRODUCT OPERATION 8
3-1 BEFORE OPERATION 8
3-2 DURING OPERATION (PAYING ATTENTION TO CUSTOMERS) 10
4PARTS DESCRIPTION 12
5ACCESSORIES 13
6ASSEMBLY AND INSTALLATION 15
6-1 UNPACKING THE CABINET 18
6-2 ATTACHING THE EXHAUST PIPES 21
6-3 ATTACHING THE SEAT 23
6-4 JOINING THE CABINETS 24
6-5 SECURING THE FLOOR PANELS 26
6-6 SECURING THE GUN CABINET 28
6-7 ATTACHING THE ROOF 29
6-8 ATTACHING THE BILLBOARD (OPTIMUS HEAD) 30
6-9 ATTACHING THE SHOULDER PANELS 32
6-10 ATTACHING TOP BOX 33
6-11 ATTACHING POP PANEL 35
6-12 REMOVING TRANSIT BRACKET 36
6-13 FIXATION TO SITE 37
6-14 APPLYING “HOW TO PLAY” INSTRUCTIONS 39
6-15 CONNECTING THE DVD DRIVE 40
6-16 CONNECTION OF POWER AND GROUND CABLES 42
6-17 ENGAGING POWER SUPPLY (SOTWARE INSTALLATION) 45
6-18 CONFIRMATION OF INSTALLATION 48
7PRECAUTIONS WHEN MOVING 50
7-1 MOVING THE MACHINE 50
7-2 SEPARATING THE MONITOR/SEAT CABINET 52
8GAME DESCRIPTION 57
9EXPLANATION OF TEST AND DATA DISPLAY 69
9-1 SWITCH UNIT AND COIN METER. 70
9-2 SYSTEM TEST MODE 71
9-3 SYSTEM INFORMATION 73
xii
9-4 INPUT TEST 74
9-5 OUTPUT TEST 75
9-6 DEVICE CALIBRATION 76
9-7 COIN SETTINGS 77
9-8 SCREEN TEST 78
9-9 BOOKKEEPING 79
9-10 CLOCK SETTINGS 81
9-11 GAME ASSIGNMENTS 82
10 VIDEO DISPLAY 85
10-1 GENERAL DESCRIPTION 85
10-2 CLEANING THE SCREEN 86
11 CONTROL UNIT 87
11-1 HOW TO REMOVE CONTROL UNIT 88
11-2 ADJUSTING OR REPLACING THE X AXIS VOLUME 90
11-3 ADJUSTING OR CHANGING THE Y AXIS VOLUME 95
11-4 REPLACING THE TRIGGER SWITCH 99
11-5 REPLACING THE FEEDBACK COIL 102
12 COIN HANDLING 104
12-1 CLEANING THE COIN SELECTOR 104
12-2 FAULT FINDING 107
12-3 ADJUSTING THE PRICE OF PLAY (EXCEL) 108
12-4 ADJUSTING THE PRICE OF PLAY (VTS) 109
13 REPLACING LAMPS AND LIGHTING 110
13-1 COIN DOOR LAMP 110
13-2 START BUTTON LAMP 111
14 PERIODIC INSPECTION 113
15 TROUBLESHOOTING 115
16 GAME BOARD 117
16-1 HOW TO REMOVE GAME BOARD 118
16-2 COMPOSITION OF THE GAME BOARD 119
17 DESIGN RELATED PARTS 120
18 PARTS LIST 121
19 WIRE COLOUR CODE TABLE 152
20 SCHEMATIC DIAGRAMS 153
HANDLING PRECAUTIONS
1
1
● Before performing work, be sure to turn the power off. Performing the work
without turning the power off can cause an electric shock or short circuit. In the
case where work should be performed in the status of power on, this manual
always states to that effect.
● To avoid an electric shock or short circuit, do not plug in or unplug quickly.
● To avoid an electric shock, do not plug in or unplug with a wet hand.
● Do not expose power cords or earth wires on the surface (oor, passage,
etc.). If exposed, the power cords and earth wires are susceptible to damage.
Damaged cords and wires can cause an electric shock or short circuit.
● To avoid causing a re or an electric shock, do not put things on or damage
the power cords.
● When or after installing the product, do not unnecessarily pull the power cord. If
damaged, the power cord can cause a re or an electric shock.
● In case the power cord is damaged, ask for a replacement through where the
product was purchased from or the ofce herein stated. Using the cord as is
damaged can cause re, an electric shock or leakage.
● Be sure to perform grounding appropriately. Inappropriate grounding can
cause an electric shock.
● Be sure to use fuses meeting the specied rating. Using fuses exceeding the
specied rating can cause a re or an electric shock.
● Be sure that connections such as IC BD are made properly. Insufcient insertion
can cause an electric shock.
● Specication changes, removal of equipment, conversion and/or addition not
designated by SEGA are not permitted.
- Failure to observe this may cause a re or an electric shock. Non-compliance
with this instruction can have a bad inuence upon physical conditions of the
players or the onlookers, or result in injury during play.
- SEGA shall not be held responsible for damage, compensation for damage
to a third party, caused by specication changes not designated by SEGA.
● Do not perform any work or change parts not listed in this manual. Doing so
may lead to an accident. If you need to perform any work not listed in this
manual, request work from the ofce indicated in this manual or the point of
purchase, or inquires for details.
● Be sure to perform periodic maintenance inspections herein stated.
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that
the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the cautionary matters
herein stated can cause personal injury or damage to the machine.
1
HANDLING PRECAUTIONS
2
HANDLING PRECAUTIONS
1
● For the IC board circuit inspections, only the logic tester is allowed. The use of a
multiple-purpose tester is not permitted. Be sure to take due care in this regard.
● An LED Video Screen is employed for this machine. This screen is susceptible to
damage, therefore, be very careful when cleaning the screen. For details, refer
to the section “Monitor.”
● Static electricity from your body may damage some electronics devices on the
IC board. Before handling the IC board, touch a grounded metallic surface so
that the static electricity can be discharged.
● Some parts are not designed and manufactured specically for this game
machine. The manufacturers may discontinue or change the specications of
such general-purpose parts. If this is the case, SEGA cannot repair or replace a
failed game machine whether or not a warranty period has expired.
CONCERNING THE STICKER DISPLAY
This SEGA product has stickers attached describing
the product manufacture No. (Serial No.) and Electrical
Specications. It also has a Sticker describing where to
contact for repair and for purchasing parts.
When inquiring about or asking for repairs, mention
the Serial No. and Name of Machine indicated on
the Sticker. The Serial Number indicates the product
register. Identical machines could have different
parts depending on the date of production. Also,
improvements and modications might have been made
after the publication of this manual. In order to ensure
you order the correct parts, mention the Serial No. when
contacting the applicable places.
CONCERNING WARNING DISPLAYS
This SEGA product has warning displays on stickers,
labels and/or printed instructions adhered/attached to or
incorporated in the places where a potentially hazardous
situation could arise. The warning displays are intended
for accident prevention for customers and for avoiding
hazardous situations relating to maintenance and
servicing work. Some portions of the cabinet contain
high voltage and may cause accidents if touched. When
performing maintenance, be very careful of the warning
displays. It is especially important that any complex
repair and replacement work not mentioned herein
should be performed by those technical personnel who
have knowledge of electricity and technical expertise.
In order to prevent accidents, caution any customer
ignoring the warnings to cease and desist immediately.
HANDLING PRECAUTIONS
3
1
HIGH VOLTAGE
High voltages can cause an
electric shock. Remove power
before servicing.
440-CS0010UK
DANGER
HIGH VOLTAGE
High voltages can cause an
electric shock. Remove power
before servicing.
440-CS0010UK
DANGER
HIGH VOLTAGE
High voltages can cause an
electric shock. Remove power
before servicing.
440-CS0010UK
DANGER
440-DS0010UK
LABEL DANGER HI VOLTAGE
440-DS0010UK
LABEL DANGER HI VOLTAGE
440-DS0010UK
LABEL DANGER HI VOLTAGE
440-CS0030UK
LABEL CAUTION
440-CS0030UK
LABEL CAUTION
440-CS0186-01
LABEL CAUTION EPILEPSY
421-7988-91UK
LABEL RATING SERIAL
LB1046
LABEL PAT TEST
440-WS0010UK
LABEL WARNING HI VOLTAGE
LB1130
LABEL WEEE BIN
4
PRECAUTIONS REGARDING INSTALLATION LOCATION
2
440-WS100UK
LABEL FORK HERE
440-PL100UK
LABEL PACKING
PRECAUTIONS REGARDING INSTALLATION LOCATION
5
2
This product is an indoor game machine. Do not install it outside. Even indoors,
avoid installing in places mentioned below so as not to cause a re, electric
shock, injury and/or malfunction:
- Places subject to rain or water leakage, or places subject to high humidity in
the proximity of an indoor swimming pool and/or shower, etc.
- Places subject to direct sunlight, or places subject to high temperatures in the
proximity of heating units, etc.
- Places lled with inammable gas or vicinity of highly inammable/volatile
chemicals or hazardous matter.
- Dusty places.
- Sloped surfaces.
- Places subject to any type of violent impact.
- Vicinity of anti-disaster facilities such as re exits and re extinguishers.
- The operating (ambient) temperature range is not from 5°C to 30°C.
- Places near water or spray from water such as a Jet Wash or Swimming Pool.
2
PRECAUTIONS REGARDING INSTALLATION LOCATION
6
PRECAUTIONS REGARDING INSTALLATION LOCATION
2
2-1 LIMITATIONS OF USAGE
● Be sure to check the Electrical Specications. Ensure that this product
is compatible with the location’s power supply, voltage, and frequency
requirements. A plate describing Electrical Specications is attached to the
product. Non-compliance with the Electrical Specications can cause a re
and electric shock.
● This product requires a breaker and earth mechanism as part of the location
facilities. Using the product without these can cause a re and electric shock.
● Ensure that the indoor wiring for the power supply is rated at 15 A or higher (AC
single phase 100 V ~ 120 V area), and 7 A or higher (AC 220 V ~ 240 V area).
Non-compliance with the Electrical Specications can cause a re and electric
shock.
● Be sure to use an independent power supply equipped with an earth leakage
breaker. Using a power supply without an earth leakage breaker can cause an
outbreak of re if a power surge occurs.
● Putting many loads on one electrical outlet can cause generation of heat and
a re resulting from overload.
● When using an extension cord, ensure that the cord is rated at 15 A or higher (AC
100 V ~ 120 V area) and 7 A or higher (AC 220 V ~ 240 V area). Using a cord
rated lower than the specied rating can cause a re and electric shock.
Electricity Consumption:
MAX. 340w @ 230VAC-240VAC
PRECAUTIONS REGARDING INSTALLATION LOCATION
7
2
FIG. 2 Installation and operation area (cm)
2-2 OPERATION AREA
● For the operation of this machine, secure a minimum area of 3.1 m (W) x 3.67
m (D). If the machine rolls during play it could lead to serious injury, especially
if anyone is hit on the head. You must secure the space specied in this
document.
● Be sure to provide sufcient space specied in this manual. Do not allow
objects to block the ventilation ports. It can cause generation of heat and a
re.
● SEGA shall not be held responsible for damage or compensation for damage
to a third party, resulting from the failure to observe this instruction.
● If the machine does not t through the entryway to the installation location, do
not disassemble it without rst consulting the instructions. If the machine still
does not t through the entryway after following the procedures in this manual,
contact your retailer or the ofce listed in this manual.
To install this product, the entrance must be at least 1.75 m in width and 1.94 m in
height.
367
310
Table of contents
Popular Arcade Game Machine manuals by other brands
Sega
Sega Daytona Championship USA owner's manual
Sega
Sega THE HOUSE OF THE DEAD III DELUXE Operator's manual
UNIS
UNIS SAFARI RANGER Operation manual
NAMCO
NAMCO Quick & Crash Operator's manual
Arachnid
Arachnid DiscGlo Shuffle manual
Coastal Amusements
Coastal Amusements The Balloon Game Assembly instructions
