Hasbro my LiTTLE PONY Friendship Express Train... User manual

© 2011 Hasbro.All Rights Reserved.
TM & ® denote U.S.Trademarks.
35891 PN 7201270000
Product and colors may vary.
Questions? Call 1-800-327-8264
IMPORTANT: BATTERY INFORMATION
CAUTION:
1. Always follow the instructions carefully. Use only batteries specified
and be sure to insert them correctly by matching the + and – polarity
markings.
2. Do not mix old batteries and new batteries or standard (carbon-zinc)
with alkaline batteries.
3. Remove exhausted or dead batteries from the product.
4. Remove batteries if product is not to be played with for a long time.
5. Do not short-circuit the supply terminals.
6. Should this product cause, or be affected by, local electrical
interference, move it away from other electrical equipment. Reset
(switching off and back on again or removing and re-inserting
batteries) if necessary.
7. RECHARGEABLE BATTERIES: Do not mix these with any other types of
batteries. Always remove from the product before recharging. Recharge
batteries under adult supervision. DO NOT RECHARGE OTHER TYPES OF
BATTERIES.
AGES 3+
If the train engine does not respond, try
switching it OFF and back ON again, or
replace the batteries.
Troubleshooting
Hair entanglement may result if child’s
hair comes in contact with moving parts
of toy. Adult supervision is required.
CAUTION:
Friendship Express Train™
Includes:
x2
BATTERIES
ALKALINE
REQUIRED
1.5V AA or LR6 size
Phillips/cross head screwdriver (not included)
needed to insert batteries.
NOT INCLUDED

An ON/OFF
switch is located
on the bottom
of the train
engine. Move
the switch to
the ON position.
Place
the train engine
on the track, and hook
the railroad cart to the
back. Align the wheels with
the sides of the track. To
start and stop the train,
press the train engine’s
smoke stack.
Use a Phillips/cross head
screwdriver (not included)
to loosen screw in battery
compartment cover (screw
remains attached to cover).
Remove cover. Insert
2 x 1.5V “AA” or LR6 size
alkaline batteries. Replace
cover and tighten screw.
Decorate
your train
set with the
sticker labels
as shown.
Connect the ends of
the track sections
as shown.
Multiple ways to set up tracks!
Apply the Labels
Connect the Track
To Install Train Engine Batteries
Playing With the Train Set
NOTE:The train engine uses battery
power whenever the switch is in the
ON position. To help conserve battery
life, move the switch to OFF when not
playing with the toy.