Hathaway SHOOTING STAR BG50375 User manual

Ver. 1020 BG50375
Please Do Not Hesitate to
Contact Our Consumer Hotline
at 800-759-0977
with Any Questions That May
Arise During Assembly or
Use of This Product!
SHOOTING STAR
ARCADE BALL TABLE
ASSEMBLY INSTRUCTIONS

2
THANK YOU!
Thank you for purchasing this product. We work around the clock and around the globe to ensure
that our products maintain the highest possible quality. However, in the rare case of issues during
assembly or use of this product, please contact our Consumer Hotline at 800-759-0977for immediate
assistance before contacting your retailer. Please read the warranty information at the back of these
assembly instructions for further details.
ASSEMBLY TIPS
1. Find a clean, level surface to begin the assembly of your game table. We recommend that two adults
work together to assemble this game. You may want to carefully cut or tear the four corners of the box
so that the bottom of the box can be used as your work surface.
2. Remove all of the contents from box and verify that you have all of the parts shown on the Parts
List before you begin assembly. Note: Some parts may be pre-installed or pre-assembled.
3. Some figures or drawings may not look exactly like product.
4. When installing parts that have more than one screw orbolt, hand tighten all screws orbolts
in place before final tightening with screwdriver orwrench.
5. Electric screwdrivers may be helpful during assembly; however, please set a low torque and use
extreme caution because screws may be stripped or overtightened, resulting in damaged parts, if the
electric screwdriver’s torque is set too high.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS
IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.
CARE AND USE
1. This product is intended for INDOOR use only.
2. Do NOT drag the table when moving it, as this will damage the legs.

3
Parts List
8/20
SHOOTING STAR ARCADE BALL TABLE - BG50375
Illustrations Not to Scale
PARTS
NGP58761*
TARGET BOARD
WIRING HARNESS
NGP58762*
TARGET BOARD
FLIP SWITCH
*Pre-assembled on Target Board
#1 NGP7906
LEFT FRONT
SIDE PANEL
#2 NGP7907
END PANEL
#3 NGP7908 #4 NGP7910
LEFT BACK
SIDE PANEL
#5 NGP7911
FRONT BOTTOM
PLAYING FIELD
#6 NGP7912 #7 NGP7913
#8 NGP7914
LEFT LEG
#9 NGP7915 #10 NGP7916
TOP PANEL
#11 NGP7917 #12 NGP7918
(A)
SUPPORT BRACE
#13 NGP7919 #14 NGP7920
#15 NGP7921 #16 NGP7922 #17 NGP7923 #18 NGP7924 #19 NGP7925 #20 NGP5886 #21 NGP58763
#22 NGP7926 #23 NGP7927
1/4” FLAT
WASHER
#27
1” SCREW
#28
1/2” SCREW
#29 #30
1/4”X1”
BOLT
#24 #25 #26
HARDWARE PACK - NGP8022
RIGHT FRONT
SIDE PANEL
RIGHT BACK
SIDE PANEL
BACK BOTTOM
PLAYING FIELD
TOP
PLAYING FIELD RIGHT LEG BACKBOARD
(B)
SUPPORT BRACE
BACK END PANEL
CONNECTING
PLATE
TARGET BOARD TOP FRONT APRON CORNER BALL POWER ADAPTER
ELECTRONIC
SCORER
TOP RAIL
CORNER
X1 X1 X1 X1 X1 X1 X1
X1
X1 X1 X1 X1 X3 X3
X20 X22 X6 X10 X32X20 X4
X1 X2 X1 X1 X1 X10 X1
X1 X2 X1 X5
#1
#2
#3
#4
#5
#15
#10
#9
#23 #19
#8
#18
#11
#22
#17
3/4” SCREW
3/4” SCREW
SILVER
#6,#7,#13,#14
#12
#16
#32 NGP7928
COVER PANEL
X1
HEX WRENCH
#31
3/4” FLAT
SCREW
X1
For replacement parts please call 800-759-0977.

4
THANK YOU!ASSEMBLY INSTRUCTIONS
Figure 1
Figure 2
#1
#2
#8
#26
#13
#13
#29
#24
#25
#16
#16
#29
Bottom
Top ramp

5
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
Figure 3
Figure 4
#28
#9
#10
#3
FIG. 4A
FIG. 4B
#3
#3 #3
#19
#19
#19
#8
#8
#8
#24 #25

6
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
Figure 5
Figure 6
#6
#14
#14
#29
#29
#29

Turn the table over
7
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
Figure 7
Figure 8
#26
#28
#5
#4
#12
#15

8
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
Figure 9
#7
Figure 10
TM
#24 #25
#16

9
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
Figure 11
Figure 12
#17
TM
#17 FIG. 11A
FIG. 12A
FIG. 12B
#5
#22 #11
#26

10
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
Figure 13
Figure 14
TM
TM
#24
#25
#27
#18
#11
#5
#23
#29
FIG. 14A
FIG. 13A
#32
#30
#12
FIG. 14B

180-DAY LIMITED WARRANTY
This product is warranted to the original purchaser to be free from defects in material or workmanship
for a period of 180 days from the date of the original retail purchase.
This warranty does not cover defects or damage due to improper installation, alteration, accident or
any other event beyond the control of the manufacturer. Defects or damage resulting from misuse,
abuse or negligence will void this warranty. This warranty does not cover scratching or damage that
may result from normal usage.
This product is not intended for institutional or commercial use; the manufacturer does not assume
any liability for such use. Institutional or commercial use will void this warranty.
This warranty is nontransferable and is expressly limited to the repair or replacement of the defective
product. During the warranty period, the manufacturer shall repair or replace defective parts at no
cost tothe purchaser. Shipping charges and insurance are not covered and are the responsibility of
the purchaser. Labor charges and related expenses for removal, installation or replacement of the
product or components are not covered under this warranty.
The manufacturer reserves the right to make substitutions to warranty claims if parts are unavailable
or obsolete.
The manufacturer shall not be liable for loss of use of the product or other consequential or incidental
costs, expenses or damages incurred by the consumer of any other use. The user assumes all risk of
injury resulting from the use of this product.
This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of
. Neither the manufac-
turer nor any of its representatives assumes any other liability in connection with this product.
All warranty claims must be made through the retailer where the product was originally
purchased. A purchase receipt or other proof of date of purchase will be required to process
all warranty claims. The model number and part numbers found within the assembly
instructions will be required when submitting any parts requests or warranty claims.
For further warranty information or inquiries, please call 800-759-0977
11

TABLE DE BALLON D’ARCADE
SHOOTING STAR
INSTRUCTIONS D’ASSEMBLAGE
BG50375
Contactez notre
service à la clientèle au
800-759-0977
avec des questions sur le montage
ou l'utilisation de ce produit.
Ver. 1020

Merci d’avoir acheté notre produit. Nous travaillons 24 heures sur 24, partout dans le monde, à garantir
que nos produits sont de la meilleure qualité possible. Toutefois, dans les rares cas de problèmes lors
du montage ou de l'utilisation de ce produit, se il vous plaît communiquer avec notre service à la clientèle
au 800-759-0977 pour une aide immédiate avant de contacter votre revendeur. Pour obtenir de plus amples
renseignements, veuillez lire l'information relative à la garantie au verso de ce guide d’instructions.
2
INSTRUCTIONS D’ASSEMBLAGE
1. Trouver une surface propre et plane, pour commencer le montage de votre table de jeu. La table
s’assemble à l’envers pour être ensuite retournée sur ses pieds, une fois l’assemblage complété.
Cette table est lourde et nécessite au moins deux adultes forts pour la soulever et la retourner.
2. Retirez le contenu de la boîte, avant de commencer l’assemblage, assurez-vous d’avoir toutes
les pièces telles que listées et illustrées au tableau d’identification. Avis : certaines pièces sont
préassemblées ou préinstallées.
3. Certaines illustrations ou dessins peuvent ne pas ressembler au produit que vous avez acheté.
4. Quand vous fixez en place une pièce avec plus d’une vis ou écrou, veuillez, en premier, les
visser à la main et terminer la fixation avec un tournevis ou une clé.
5. Un tournevis électrique peut être utile lors de l’assemblage, mais veuillez le régler à basse torque
et l’utiliser avec prudence; si la torque est trop élevée, la vis peut se défaire ou être trop serrée.
IMPORTANT! VEUILLEZ LIRE, EN ENTIER, TOUTES LES
INSTRUCTIONS AVANT D’ASSEMBLER VOTRE PRODUIT.
MERCI!
ENTRETIEN ET USAGE
1. Ce produit doit être utilisé À L’INTÉRIEUR seulement.
2. NE JAMAIS déplacer la table en la traînant, cela pourrait endommager les pieds.

3
liste des pièces
TABLE DE BALLON D’ARCADE SHOOTING STAR - BG50375
illustrations non à l'échelle
avant
gauche panneau panneau d'extrémité
gauche arrière
côté panneau
dessous avant
terrain de jeu
jambe gauche panneau du haut
(A)
soutien accolade
rondelle plate
1/4” vis 3/4” vis 1/2”vis 1”
vis 3/4”
argent
boulon
1/4”X1”
droit arrière
côté panneau
bas du dos
terrain de jeu
supérieur
terrain de jeu panneau
(B)
soutien accolade
panneau arrière
plaque de
raccordement planche cible
haut devant coin tablier ballon adaptateur secteur
marqueur
électronique
coin de rail
supérieur
avant
droit panneau
jambe droite
#1
#2
#3
#4
#5
#15
#10
#9
#23 #19
#8
#18
#11
#17
8/20
#1 NGP7906 #2 NGP7907 #3 NGP7908 #4 NGP7910 #5 NGP7911 #6 NGP7912 #7 NGP7913
#8 NGP7914 #9 NGP7915 #10 NGP7916 #11 NGP7917 #12 NGP7918 #13 NGP7919 #14 NGP7920
#15 NGP7921 #16 NGP7922 #17 NGP7923 #18 NGP7924 #19 NGP7925 #20 NGP5886 #21 NGP58763
#22 NGP7926 #23 NGP7927
#27 #28 #29
#24 #25 #26
X1 X1 X1 X1 X1 X1 X1
X1
X1 X1 X1 X1 X3 X3
X20 X22 X6 X10 X32 X20
X1 X2 X1 X1 X1 X10 X1
X1 X2
#1
#2
#3
#4
#5
#15
#10
#9
#23 #19
#8
#18
#11
#22
#17
#6,#7,#13,#14
#12
#16
PIÈCES
Sac de quincaillerie - NGP8022
NGP58761*
planche cible
faisceau de câblage
NGP58762*
planche cible
interrupteur bascule
*pré assemblé sur planche cible
#30 X4
X1 X5
#32 NGP7928
panneau de
couverture
X1
clé hexagonale
#31
vis plate 3/4”
X1
Pour commander une pièce de remplacement, veuillez téléphoner au 1 800 759-0977

4
THANK YOU!INSTRUCTIONS D’ASSEMBLAGE
Figure 1
Figure 2
#1
#2
#8
#26
#13
#13
#29
#24
#25
#16
#16
#29
bas
rampe supérieure

5
THANK YOU!INSTRUCTIONS D’ASSEMBLAGE (suite)
Figure 3
Figure 4
#28
#9
#10
#3
FIG. 4A
FIG. 4B
#3
#3 #3
#19
#19
#19
#8
#8
#8
#24 #25

6
THANK YOU!INSTRUCTIONS D’ASSEMBLAGE (suite)
Figure 5
Figure 6
#6
#14
#14
#29
#29
#29

7
THANK YOU!INSTRUCTIONS D’ASSEMBLAGE (suite)
Retourner la table
Figure 7
Figure 8
#26
#28
#5
#4
#12
#15

8
THANK YOU!INSTRUCTIONS D’ASSEMBLAGE (suite)
Figure 9
#7
Figure 10
TM
#24 #25
#16

THANK YOU!INSTRUCTIONS D’ASSEMBLAGE (suite)
9
Figure 11
Figure 12
#17
TM
#17 FIG. 11A
FIG. 12A
FIG. 12B
#5
#22 #11
#26