Hawking HAI7SIP User manual

Hi-Gain Omni-Directional
7dBi Antenna
HAI7SIPHAI7SIP
High Grade Antenna Design
Boost Your Wireless Experience
Hawking Technologies' HAI7SIP, 2.4GHz Hi-Gain WiFi antenna boosts your wireless signal strength from 2dBi (standard
power) to 7dBi. A large problem with many wireless networks is the poor coverage area of standard Access Points and
Wireless Routers. The Hawking HAI7SIP is an easy to install solution that plugs directly into the antenna port of your existing
wireless device. By upgrading your external wireless antenna to a high grade 7dBi Hawking antenna your wireless signal
strength, wireless operating distance and overall performance is significantly improved.
The advanced 7dBi Omni Direction Antenna is built with high grade material ensuring maximum quality and performance.
New advancements in antenna design allow the antenna to perform more efficiently than other WiFi antennas on the market
with the same gain level. Gold plated connectors and connector adapters create maximum conductivity for a solid link to the
wireless device.
Hawking Hi-Gain Antennas are designed to work with all wireless devices with removable antennas. SMA and TNC connectors
are included, others may be ordered directly from Hawking.
Features
Increase your Wireless Network Signal Strength
Works with Most Wireless Devices with Removable Antennas
Compatible with 2.4GHz 802.11b/g Wireless Standards
Hi-Grade Award Winning Design and Technology
Gold Series Connectors for increased Performance
Easy Installation
System Requirements:
One Wireless 2.4GHz 802.11b/g Device with a Removable External Antenna
Connector Type: Reverse SMA or Reverse TNC
HAI7SIP
2.4GHz Hi-Gain Omni-Directional
7dBi Antenna
PACKAGE CONTENTS:
One Hi-Gain 7dBi Antenna
Easy to Follow Users Manual
RP-SMA to RP-TNC Gold Series
Connector Adapter

HAI7SIP
Step 1 - Unscrew your Wireless Device's Antenna
Unscrew the current antenna on the device you plan to attach your Hi-Gain antenna to.
Step 2 - Screw in your Hi-Gain Hawking Antenna
Connect your new Hi-Gain Wireless Antenna to your device by screwing on the SMA connector
attached to the end of the Antenna Cable.
Step 3 - Position your Antenna
Choose the optimal position for your antenna (on the wall, on your desk...) and
poweronyourwirelessLAN.
HAI7SIP
Hi-Gain 2.4GHz Omni-Directional
7dBi Antenna
Network Specifications:
IIEEE 802.11b/g
Operating Frequency
2.4~2.4835 Ghz
Electrical Properties
Impedence: 50 Ohms Nominal
Gain: 7dBi
Polorization: Vertical
Cable
Low Loss Cable: 2.5ft
Connectors
Gold Plated Reverse SMA Plug
Gold Plated Reverse TNC Plug
Dimensions
22.5 (H) x 8.5 (W) x 8.5 (L) cm
Hi-Gain Omni-Directional Antenna
(c)2005 Hawking Technologies, Inc. All Rights Reserved.
HAI15SC Hi-Gain 15dBi Corner Antenna
HAO9SDP Hi-Gain 9dBi Outdoor Directional Antenna