Hawking HAO9SDP User manual

Hi-GainTM 9dBi Outdoor
Directional Antenna Kit
HAO9SDPHAO9SDP
Extend the Distance of your Wireless Devices up to 1 mile
The HAO9SDP Hi-Gain Outdoor 9dBi Directional Antenna Kit is a heavy-duty, weather proof, high powered antenna for
extending the range of your 802.11b and 802.11g WiFi devices. Whether your application requires extending a wireless signal
from one building to another or simply from one end of a house to the other, the Hi-Gain Directional Antenna Kit from
Hawking is the perfect solution. The power rating of WiFi antennas is measured in terms of decibels (dBi). The HAO9SDP
boosts the antenna power of standard antennas from a minimal 2dBi to a staggering 9dBi. This results in extended wireless
distances of up to 1.5 miles when paired with another Hawking Hi-Gain 9dBi Outdoor Directional Antenna.
Installation of the HAO9SDP is simple and straight forward. It is compatible with most wireless devices (Access Points,
Routers, Bridges and Network Adapters) on the market with removable external antennas. The Hawking Antenna comes
equipped with N-Type, RP-SMA, RP-TNC connectors to support a wide range of wireless devices. For those devices that use
adapters not included in the packaging, please visit the Hawking Technologies website for a selection of specific connectors for
your device.
NOTE: To use the HAO9SDP, a Hawking Low Signal Loss outdoor antenna cable is required for proper installation and
operation. Hawking offers two modesl, the HAC10N (10-foot cable) and the HAC3ON (30-foot cable). Depending on your
setup, a shorter cable is recommended for minimal signal loss due to cable length.
Features
2.4 Ghz Frequency - Works with popular Wireless Standards
Reverse SMA Plug - Compatible with most Access Points/Adapters
TNC Adapter is included for Cisco & Linksys Routers
A 9dB External Outdoor Directional Antenna - Ensures optimal coverage
Supports all network operation systems
Setup is quick and simple
System Requirements:
One Wireless 2.4GHz 802.11b/g Device with a Removable External Antenna
Connector Type: Reverse SMA or Reverse TNC
HAO9SDP
2.4GHz Hi-Gain Directional 9dBi
Outdoor Directional Antenna
PACKAGE CONTENTS:
One 9dBi Directional Antenna
50cm Extension Cable (N-Plug to Rev. SMA Plug)
TNC Adapter
Surge Protector (N-Plug to N-Jack)
Waterproof Tape
Mounting Kit
Quick Installation Guide

HAO9SDP
HAO9SDP
Hi-Gain 9dBi Outdoor Directional
Antenna Kit
Hi-Gain Outdoor 9dBi Directional Antenna Kit
Preinstallation - The HAC30N outdoor cable is sold seperately and required for outdoor
installation
Step 1 - Connect Extension Cable to your Access
Point
Remove the original antenna from your Wireless Access
Point and attach the Rev. SMA connector from the
Extension Cable (white color cable) to your Access Point’s
antenna connector
Step 2 - Install the Surge Protector
After you have attached the Extension Cable to your
Wireless Access Point, install the Surge Protector to the
N-Plug at the opposite end of the Extension Cable.
Step 3 - Connect to the Antenna and Protect it from weather damage
Once you have successfully grounded your Surge Protector, connect the other end to the
N-Plug Extension cable (HAC30N). Then, please take the Water-Proof Tape and tape the
metal connectors that are exposed to the outdoors to prevent any damage from weather.
After your antenna is completely connected, safely mount your antenna to a pole or wall.
(See QIG for instructions on how to assemble for wall or pole mounting).
RELATED PRODUCTS
Outdoor
HAC30N 30 ft. Outdoor N-Plug Hi-Gain Antenna Cable
HAO9SIP Hi-Gain 9dBi Outdoor Omni-Directional Antenna Kit
HAO9SDP Hi-Gain 14dBi Outdoor Directional Antenna Kit
HAO15SIP Hi-Gain 9dBi Outdoor Omni-Directional Antenna Kit
Indoor
HA12W Hi-Gain 12dBi Indoor Window Antenna
HAO15SC Hi-Gain 15dBi Indoor Corner Antenna
HAI7SIP Hi-Gain 7dBi Indoor Omni-Directional Antenna
HAI7MD Hi-Gain 7dBi Compact Indoor Directional Antenna
ADDITIONAL FEATURES & BENEFITS
Excellent outdoor performance -Increase Your Overall Wireless Range and Performance
UV resistant and can withstand wind speeds of up to 134 m/hr
Works with 802.11 b/g/n* Wireless Standards
Easy Installation - Plug and Play
Connect to HAC30N
Network Specifications:
IIEEE 802.11b/g
Operating Frequency
2.4~2.4835 Ghz
Electrical Properties
Impedence: 50 Ohms Nominal
Gain: 9dBi
Polorization: Linear, Vertical
HPBW
Horizontal: 70º
Vertical: 65º
Antenna Connectors
N-Jack
Cable
ULA 198, 20cm
Adapters
TNC Adapter
Survival wind Speed
134 m/hr
Radome color
Gray-white
Radome material
PC, UV resistant
Dimensions
4.9 (L) x 1.88 (W) x 4.9 (H) in
Weight
0.5 lbs
Specifications are subjet to change without notice. ©2007 Hawking Technologies, Inc. All Rights Reserved.
HAWKING TECHNOLOGIES, INC
USA: Irvine, California
Sales: 888.662.8828 or 949.790.0800 Fax: [phone]
Email: [email protected] Email: [email protected]
EUROPE: Rotterdam, The Netherlands
Sales: 31-10-245-1600 Fax: [phone]
Email: [email protected] Email: [email protected]