Hawking Wireless-G Router User manual

Table of Contents
INTRODUCTION.....................................................................................................3
Wireless Router Features...............................................................................3
Package Contents..........................................................................................5
Physical Details..............................................................................................7
INSTALLATION .....................................................................................................9
Requirements.................................................................................................9
Procedure ......................................................................................................9
SETUP ................................................................................................................11
Overview......................................................................................................11
Configuration Program ................................................................................12
Setup Wizard...............................................................................................14
Configuration via Web.................................................................................19
PC CONFIGURATION...........................................................................................35
Overview......................................................................................................35
Windows Clients..........................................................................................35
Macintosh Clients.........................................................................................48
Linux Clients................................................................................................48
Other Unix Systems......................................................................................48
Wireless Station Configuration ....................................................................49
APPENDIX ATROUBLESHOOTING..........................................................50
Overview......................................................................................................50
General Problems........................................................................................50
Internet Access.............................................................................................50
Wireless Access ...........................................................................................51
APPENDIX BABOUT WIRELESS LANS....................................................53
Modes..........................................................................................................53
BSS/ESS ......................................................................................................53
Channels......................................................................................................53
WEP .............................................................................................................54
Wireless LAN Configuration.........................................................................54
APPENDIX CSPECIFICATIONS ...........................................................................55
Multi-Function Wireless Router....................................................................55
Wireless Interface ........................................................................................55
Regulatory Approvals...................................................................................56

Introduction
Introduction
This Chapter provides an overview of the Hawking Technologies’ Hi-Speed
Wireless-GRouter's features and capabilities.
Congratulations on the purchase of your new Hi-Speed, 54Mbps, Hawking Technologies
Wireless-GRouter. The Wireless-GRouter is a multi-function device providing the
following services:
•Shared Broadband Internet Access for all LAN users.
•4-Port Switching Hub for 10BaseT or 100BaseT connections.
•Wireless Access Point for 802.11b and 802.11gWireless Stations.
Wireless Router Features
The Wireless-GRouter incorporates many advanced features, carefully designed to
provide sophisticated functions while being easy to use.
Internet Access Features
•Shared Internet Access. All users on the LAN or WLAN can access the
Internet through the Wireless Router, using only a single external IP Address. The
local (invalid) IP Addresses are hidden from external sources. This process is called
NAT (Network Address Translation).
•DSL & Cable Modem Support. The Wireless Router has a 10/100BaseT
Ethernet port for connecting a DSL or Cable Modem. All popular DSL and Cable
Modems are supported. SingTel RAS and Big Pond (Australia) login support is also
included.
•PPPoE, and PPTP. The Internet (WAN port) connection supports PPPoE (PPP
over Ethernet), PPTP (Peer-to-Peer Tunneling Protocol), as well as "Direct Connec-
tion" type services. Unnumbered IP with PPPoE is also supported.
•Fixed or Dynamic IP Address,the Wireless-GRouter supports both Dynamic
IP Address (IP Address is allocated on connection) and Fixed IP Address.
1

Advanced Internet Functions
•Communication Applications. Support for Internet communication applica-
tions, such as interactive Games, Telephony, and Conferencing applications, which
are often difficult to use when behind a Firewall, is included.
•Special Internet Applications. Applications which use non-standard connec-
tions or port numbers are normally blocked by the Firewall. The ability to define and
open ports for whatever your application may be is supported.
•Virtual Servers. This feature allows Internet users to access Internet servers on
your LAN. The required setup is quick and easy.
•DDNS Support. DDNS (Dynamic DNS) allows Internet users to connect to
Virtual Servers on your LAN using a domain name, even if your IP address is not
fixed.
•Multi-DMZ. For each WAN (Internet) IP address allocated to you, only one (1)
PC on your local LAN can be configured to allow unrestricted 2-way communication
with Servers or individual users on the Internet. This provides the ability to run pro-
grams which are incompatible with Firewalls.
•URL Filter. Use the URL Filter to block access to undesirable Web sites by LAN
users.
•Internet Access Log. See which Internet connections have been made.
•Access Control. Using the Access Control feature, you can assign LAN users
to different groups, and determine which Internet services are available to each
group.
•VPN Pass through Support.PCs with VPN (Virtual Private Networking)
software using PPTP, L2TP and IPSec are transparently supported -no configura-
tion is required.
Wireless Features
•Standards Compliant. The Wireless Router complies with the IEEE802.11g
(DSSS) specifications for Wireless LANs.
•Supports both 802.11b and 802.11g Wireless Stations. The 802.11g
standard provides for backward compatibility with the 802.11b standard, so both
802.11b and 802.11g Wireless stations can be used simultaneously.
•Speeds to 54Mbps. All speeds up to the 802.11gmaximum of 54Mbps are
supported.
•WEP support. Support for WEP (Wired Equivalent Privacy) is included. Key
sizes of 64 Bit and 128 Bit are supported.
•Wireless MAC Access Control. The Wireless Access Control feature can
check the the MAC address (hardware address) of Wireless stations to ensure that
only trusted Wireless Stations can access your LAN.
•Simple Configuration. If the default settings are unsuitable, they can be
changed quickly and easily.
LAN Features
•4-Port Switching Hub. The Wireless Router incorporates a 4-port 10/100BaseT
switching hub, making it easy to create or extend your LAN.

Introduction
•DHCP Server Support. Dynamic Host Configuration Protocol provides a dy-
namic IP address to PCs and other devices upon request. The Wireless Router can
act as a DHCP Server for devices on your local LAN and WLAN.
•Multi Segment LAN Support. LANs containing one or more segments are
supported, using the Wireless Router's RIP (Routing Information Protocol) support
and built-in static routing table.
Configuration & Management
•Easy Setup. Use your WEB browser from anywhere on the LAN or WLAN for
configuration.
•Configuration File Upload/Download. Save (download) the configuration
data from the Wireless Router to your PC, and restore (upload) a previously-saved
configuration file to the Wireless-GRouter.
•Remote Management. The Wireless-GRouter can be managed from any PC
on your LAN. And, if the Internet connection exists, it can also (optionally) be con-
figured via the Internet.
•Network Diagnostics.You can use the Wireless-GRouter to perform a Ping or
DNS lookup.
•UPnP Support. UPnP (Universal Plug and Play) allows automatic discovery and
configuration of the Wireless Router. UPnP is by supported by Windows ME, XP, or
later.
Security Features
•Password -protected Configuration. Optional password protection is
provided to prevent unauthorized users from modifying the configuration data and
settings.
•Wireless LAN Security. WEP (Wired Equivalent Privacy) is supported, as well
as Wireless access control to prevent unknown wireless stations from accessing
your LAN.
•NAT Protection. An intrinsic side effect of NAT (Network Address Translation)
technology is that by allowing all LAN users to share a single IP address, the loca-
tion and even the existence of each PC is hidden. From the external viewpoint, there
is no network, only a single device -the Wireless Router.
•Protection against DoS attacks. DoS (Denial of Service) attacks can flood
your Internet connection with invalid packets and connection requests, using so
much bandwidth and so many resources that Internet access becomes unavailable.
The Wireless Router incorporates protection against DoS attacks.
Package Contents
The following items should be included:
•Hi-Speed Wireless-GRouter Unit
•Power Adapter
•Quick Installation Guide
•One Ethernet Cable
•CD-ROM containing User’s Manual and Setup Wizard.

If any of the above items are damaged or missing, please contact your dealer immedi-
ately.

Introduction
Physical Details
Front-mounted LEDs
Power LED On -Power on.
Off -No power.
Internet LED On -Connection to the Broadband Modem attached to the WAN
(Internet) port is established.
Off -No connection to the Broadband Modem.
Flashing -Data is being transmitted or received via the WAN port.
WLAN LED On -Wireless connection available; Wireless Access Point is ready
for use.
Off -No Wireless connection available.
Flashing -Data is being transmitted or received via the Wireless
access point. Data includes "network traffic" as well as user data.
LAN LEDs For each port, there are 2 LEDs
•Link/Act
•On -Corresponding LAN (hub) port is active.
•Off -No active connection on the corresponding LAN (hub)
port.
•Flashing -Data is being transmitted or received via the cor-
responding LAN (hub) port.
•100
•On -Corresponding LAN (hub) port is using 100BaseT.
•Off -Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.

Rear Panel
Figure 1: Rear Panel
Power port Connect the supplied power adapter here.
10/100BaseT
LAN port Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports.
If required, any port can be connected to another hub. Any LAN
port will automatically function as an "Uplink" port when neces-
sary.
Internet port
(10/100BaseT) Connect the DSL or Cable Modem here. If your modem came with a cable, use the supplied cable. Otherwise, use a standard
LAN cable.
Reset Button This button has two (2) functions:
•Reboot. When pressed within 3~5 seconds, the power
LED lights amber then released, the Wireless Router will re-
boot (restart).
•Clear All Data. This button can also be used to clear ALL
data and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1. After Power On.
2. Hold the Reset Button down.
3. Keep holding the Reset Button more than 5seconds, until
the Amber LED has flashed.
4. Release the Reset Button. The Wireless Router is now
using the factory default values.

Installation
This Chapter covers the physical installation of the Wireless Router.
Requirements
•Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 con-
nectors.
•TCP/IP protocol must be installed on all PCs.
•For Internet Access, an Internet Access account with an ISP, and either of a DSL or
Cable modem (for WAN port usage)
•To use the Wireless Access Point, all Wireless devices must be compliant with the
IEEE802.11b or IEEE802.11gspecifications.
Procedure
1. Choose an Installation Site
Select a suitable place on the network to install the Wireless Router.
Ensure the Wireless Router and the DSL/Cable modem are powered OFF.
2

For best Wireless reception and performance, the Wireless
Router should be positioned in a central location with mini-
mum obstructions between the Wireless Router and the PCs.
Also, if using multiple Access Points, adjacent Access Points
should use different Channels to avoid interference.
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports on the Wire-
less Router. Both 10BaseT and 100BaseT connections can be used simultaneously.
If required, connect any port to a normal port on another Hub, using a standard LAN
cable. Any LAN port on the Wireless Router will automatically function as an "Up-
link" port when required.
3. Connect WAN Cable
Connect the DSL or Cable modem to the WAN port on the Wireless Router. Use the
cable supplied with your DSL/Cable modem. If no cable was supplied, use a stan-
dard cable.
4. Power Up
•Power on the Cable or DSL modem.
•Connect the supplied power adapter to the Wireless Router and power up.
Use only the power adapter provided. Using a different one may cause hardware
damage
5. Check the LEDs
•The Power LED should be ON.
•The Power LED should flash, then turn Off. If it stays on, there is a hardware error.
•For each LAN (PC) connection, the LAN Link/Act LED should be ON (provided the
PC is also ON.)
•The Internet LED should be ON.
•The WLAN LED should be ON
For more information, refer to Front-mounted LEDs in Chapter 1.

Setup
This Chapter provides Setup details of the Wireless Router.
Overview
This chapter describes the setup procedure for:
•Internet Access
•LAN configuration
•Wireless setup
•Assigning a Password to protect the configuration data.
PCs on your local LAN may also require configuration. For details, see Chapter 4 -PC
Configuration.
Other configuration may also be required, depending on which features and functions of
the Wireless Router you wish to use. Use the table below to locate detailed instructions
for the required functions.
To Do this: Refer to:
Configure PCs on your LAN. Chapter 4:
PC Configuration
Check Wireless Router operation and Status. Chapter 5:
Operation and Status
Use any of the following Advanced features:
•Access Control
•Dynamic DNS
•Advanced Internet (Special Applications, DMZ,
URL Filter)
•Virtual Servers (Port Forwarding)
•WAN Port Setup
Chapter 6:
Advanced Features
Use any of the following Administration Configuration
settings or features:
•Config File download/upload
•Logs
•Network Diagnostics (Ping, DNS Lookup)
•Options (Backup DNS, TFTP, UPnP, Firewall)
•PC Database
•Remote Management
•Security settings
•Firmware Upgrade
Chapter 7
Advanced Administration
3

Configuration Program -
The Wireless Router contains an HTTP server. This enables you to connect to it, and
configure it, using your Web Browser. Your Browser must support JavaScript.
The configuration program has been tested on the following browsers:
•Netscape V4.08 or later
•Internet Explorer V4 or later
Mac Installation
•Mac OSX users may also follow these instructions for setup. (IE browser recom-
mended)
Preparation
Before attempting to configure the Wireless Router, please ensure that:
•Your PC can establish a physical connection to the Wireless Router. The PC and
the Wireless Router must be directly connected (using the Hub ports on the Wire-
less Router) or on the same LAN segment.
•The Wireless Router must be installed and powered ON.
•If the Wireless Router's default IP Address (192.168.1.254) is already used by
another device, the other device must be turned OFF until the Wireless Router is al-
located a new IP Address during configuration.
Using UPnP
If your Windows system supports UPnP, an icon for the Wireless Router will appear in
the system tray, notifying you that a new network device has been found, and offering to
create a new desktop shortcut to the newly-discovered device.
•Unless you intend to change the IP Address of the Wireless Router, you can accept
the desktop shortcut.
•Whether you accept the desktop shortcut or not, you can always find UPnP devices
in My Network Places (previously called Network Neighborhood).
•Double -click the icon for the Wireless Router (either on the Desktop, or in My
Network Places) to start the configuration. Refer to the following section Setup Wiz-
ard for details of the initial configuration process.
Using your Web Browser
To establish a connection from your PC to the Wireless Router:
1. After installing the Wireless Router in your LAN, start your PC. If your PC is already
running, restart it.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the Wireless Router, as
in this example, which uses the Wireless Router's default IP Address:
HTTP://192.168.1.254
Because the default password is blank, you will not be prompted for a password. How-
ever, you should assign a password. See the Password Setup section later in this
chapter for details.

Advanced Administration
If you can't connect
If the Wireless Router does not respond, check the following:
•The Wireless Router is properly installed, LAN connection is OK, and it is
powered ON. You can test the connection by using the "Ping" command:
•Open the MS-DOS window or command prompt window.
•Enter the command:
ping 192.168.1.254
If no response is received, either the connection is not working, or
your PC's IP address is not compatible with the Wireless Router's IP
Address. (See next item.)
•If your PC is using a fixed IP Address, its IP Address must be within the
range 192.168.1.1 to 192.168.1.253to be compatible with the Wireless
Router's default IP Address of 192.168.1.254. Also, the Network Mask
must be set to 255.255.255.0. See Chapter 4 -PC Configuration for de-
tails on checking your PC's TCP/IP settings.
•Ensure that your PC and the Wireless Router are on the same network
segment. (If you don't have a router, this must be the case.)
•Ensure you are using the wired LAN interface. The Wireless interface can
only be used if its configuration matches your PC's wireless settings.

Setup Wizard
The Setup Wizard provides brief and basic configuration of this device, you may enter
each screen to change the default settings. For more detailed settings, you may refer
to the “Configuration via Web” section.
1. View the listed configuration items and click Next to continue.
2. Configure Time Zone and NTP server by enabling NTP client update. Click Nextto
continue.
3. Configure the parameters for area network (If you want to change the default parame-
ter) by entering New IP Address and Subnet Mask.

Advanced Administration
4. Change the access method (Static IP, DHCP, PPPoE, PPTP) by selecting for the
pull-down menu. Enter the appropriate/required information for your selection. (If you
do not know what to input in these fields please call your ISP for more information.
Click Next to continue.
5. Configure the parameters for wireless LAN clients. Check the Disable Access Point
to disable the settings of this screen and disable your wireless connection. Click
Next to continue.

6. To manage your wireless network security by selecting the encryption type (None,
WEP, WPA and WPA2) from the pull-down menu. Enter the required information for
your specific security setting selection. Note that all wireless devices within your
network must have the same settings in order for the network to function properly.
(WPA2 is an advanced security setting and may not yet be available with some net-
working devices)
WEP Wired Equivalent Privacy

Advanced Administration
WEP is a basic wireless security setting. It is not full proof and may be hacked into by experi-
enced hackers. For WEP there are two types of security keys 64-bit and 128-bit. The higher the
number the more secure. You will have to input the corresponding key (10 digit hex key) for 64-
Bit and (28-digit hex key) for 128-Bit.
WPA WiFi Protected Access
WPA is a more advnaced standard of security. WPA2 is a newer version of WPA. WPA gives
you a choice of two encryption methods: TKIP (Temporal Key Integrity Protocol) and AES
(Advanced Encryption System). You simply enter in a passphrase which will be converted to a
valid encryption key that will be used throughout your system. Hawking recommends that
WPA be used within your network for tighter security.
Note that implementing encryption may have a slight negative effect on your network’s per-
formance.
Common Connection Types
Cable Modems
Type Details ISP Data required
Dynamic
IP Address Your IP Address is allocated automatically, when you
connect to you ISP.
Usually, none.
However, some ISP's may
require you to use a particular
Hostname, Domain name, or
MAC (physical) address.
Static (Fixed)
IP Address Your ISP allocates a per- manent IP Address to you. IP Address allocated to you.
Some ISP's may also require
you to use a particular Host-
name, Domain name, or MAC

(physical) address.
DSL Modems
Type Details ISP Data required
Dynamic
IP Address Your IP Address is allocated automatically, when you
connect to you ISP.
None.
Static (Fixed)
IP Address Your ISP allocates a per- manent IP Address to you. IP Address allocated to you.
PPPoE You connect to the ISP only
when required. The IP
address is usually allocated
automatically.
User name and password.
PPTP Mainly used in Europe.
You connect to the ISP only
when required. The IP
address is usually allocated
automatically, but may be
Static (Fixed).
•PPTP Server IP Address.
•User name and password.
•IP Address allocated to
you, if Static (Fixed).
Other Modems (e.g. Broadband Wireless)
Type Details ISP Data required
Dynamic
IP Address Your IP Address is allocated automatically, when you
connect to you ISP.
None.
Static (Fixed)
IP Address Your ISP allocates a perma- nent IP Address to you. IP Address allocated to you.

Advanced Administration
Configuration via Web
LAN Interface Setup
IP Address Default: 192.168.1.254 (this is the local address of this
Router)
Subnet Mask Default: 255.255.255.0
DHCP Disable: Select to disable this Router to distribute IP
Addresses (Disabled)
Server: Select to enable this Router to distribute IP
Addresses (DHCP Server). And the following field will be
activated for you to enter the starting IP Address
DHCP Client Range The starting address of this local IP network address
pool. The pool is a piece of continuous IP address
segment. Keep the default value 192.168.1.1 should
work for most cases.
•Maximum: 253. Default value 253 should
work for most cases.
Note: If “Continuous IP address poll starts” is set at
192.168.1.1 and the “Number of IP address in pool” is 253,
the device will distribute IP addresses from 192.168.1.1 to
192.168.1.253 to all the computers in the network that
request IP addresses from DHCP server (Router)
Show Client Click to show Active DHCP Client table.
Save After completing the settings on this page, click Save to
save the settings.

Reset Click Reset to restore to default values.
Password Setup
New Password Maximum input is 36 alphanumeric characters (case
sensitive)
Confirmed Password Key in the password again to confirm.
Save After completing the settings on this page, click Save to
save the settings.
Reset Click Reset to clear settings.
Status
Internet Shows the internet connection status
LAN Shows the Local area network information
System Briefly shows the device name and firmware information
Connection Details Click to show more details of the internet connection