Hawking GS224T User manual

GS224T
Get Connected With Hawking
! Full Wire 10/100/1000Mbps Speed
! Use Category 5 Cabling
! 10/100M Auto-sensing
! 19” Rack Mount
! Quick and Easy Installation
! Free Technical Support
Gigabit On Copper
Today's networks require a higher level of performance to
give you to compete in the marketplace. Hawking’s
GS224T Gigabit Ethernet Switch solutions equip you with
easy-to-use, standards-based technology that delivers the
throughput your users demand using the Ethernet
technology. 1000BASE-T is Ethernet that provides
speeds of 1000 Mbps over Category 5 copper cabling.
The IEEE Standards Committee formally ratified
1000BASE-T as an Ethernet standard in June 1999.
The Hawking’s GS224T Gigabit Switch provides 2 RJ-45
1000BASE-T ports to connect Gigabit Backbone or
Gigabit Server to increases the performance of your
network. The GS224T provides a full wire-rate Gigabit
Switch port for greater network performance.
Migrating Ethernet/Fast Ethernet
Networks Toward High-Speed
Networking
The first upgrade phase is implemented in three areas:
• Upgrading the backbone with a 100/1000 Mbps
Fast Ethernet/Gigabit Ethernet switch
• Upgrading the workgroup switches that support
power users or large workgroups with Gigabit
Ethernet uplink
• Implementing 100/1000 Mbps Fast
Ethernet/Gigabit Ethernet NICs in key servers
As a result, the speed of the backbone increases tenfold
to accommodate the overall increase in network
bandwidth demand while the investment in existing
workgroup switches, end-station NICs, and existing
cabling is preserved.
The second migration phase is the upgrading of power
users to 100/1000 Mbps Fast Ethernet/Gigabit Ethernet
NICs. Gigabit Ethernet to the desktop will be supported,
giving power users full access to the resources of the
network.

Package Contents:
! One 10/100/1000 Gigabit Switch
! One AC Power Cord
! 19” Rack Mount Kit
! Easy to follow owners manual
Systems Requirement:
! IEEE 802.3 10BaseT Ethernet or
! IEEE 802.3u 100BaseTX Fast
Ethernet
! IEEE 802.3ab 1000Base-T Gigabit
Ethernet
Network Operations Systems
Support:
Microsoft Windows 95/98/2000//NT/ME
and more!
Ready, Network & Go!
It's easy to set up, it's easy to use, and
everyone can use it. It only takes one
step!
Step 1 – Connect it
Connect the GS224T to your gigabit
network using standard RJ45 cabling and
you are networked!
It's that easy!
Copyright Hawking Technologies, Inc. 2001. All rights
reserved. All trademarks herein are the property of their
respective owners.
Network Diagram:
Features Benefits
10/100/1000M
Gigabit Ethernet
Switch
Easily migrates
between 10Mbps,
100Mbps and Gigabit
Gigabit On
Copper Use Category 5 easy cabling & preserve
your investment
Two 1000BASE-T
ports Easy expansion of your network
backbone
24 Switch Ports
(24 RJ-45
connectors)
Provides full wire-rate
10/100Mbps Switch
port for greater
network performance
IEEE 802.3, IEEE
802.3u, 802.3x,
802.3ab
compliant
Guaranteed Switch
performance and
hardware
compatibility with
other switches, hubs
and adapters
Specification:
! IEEE 802.3 10BASE-T, IEEE 802.3u
100BASE-TX, IEEE 802.3ab
1000BASE-T, IEEE 802.3x standard
! 24 RJ45 10/100M Auto-negotiation
switch ports
! 2 RJ45 Gigabit Copper Switch ports
! 8.4Gbps aggregated bandwidth
! Non-blocking Switch Architecture
! 12K Mac address entries support
! 19” Rack Mount
! 110/220V Internal power supply
! FCC Class A, CE, VCCI A
UL 1950, CSA 22.2 No 950, IEC 950,
TUV EN60950
Order Information:
GA164T 64-bit PCI Gigabit NIC
GS108T 8x10/100M + 1 1000T Gigabit Switch
GS224T 24x10/100M+2x1000T Gigabit Switch
GS400T 4-Port 1000T Gigabit Switch
Hawking Technologies, INC.
6A Faraday, Irvine, California, USA
Sales: [phone], [phone]
Fax: [phone]
Email: [e-mail]
Tech Support: [phone]
Email: Tec[email protected]
URL: www.hawkingtech.com