Hay AAT 10 User manual

– INSTRUCTION MANUAL –
DESIGN BY HEE WELLING & HAY
ABOUT A TABLE
A AT 10
L140/200 X W75 X H73 CM

 PARTS 

A Tabletop x1

B Column x2

C Leg x4

D Support x6

E Corner joint x2

F Crossbar x1

G Bracket x4

H Screw x18

I Adjustable
glider x4

J Expanding nut x12

K Screw x12

L Screw x4

M Allen key x1

N Allen key x1

Protect the table top from scratches and other damage while assembling.

1.
Slide the  J part into the  D part and press it down gently.
Repeat this step for all  D parts.
2.
Place 3 x D parts into the  B part.
Repeat this step on both  B parts.

D

J

B

3.
Place the  Gpart in the shown holes of the  Dparts.
Repeat this step on both  Bparts.

G
4.
Screw 3 x 
Kparts in the shown holes of the  Gpart using the Allen key ( M ).
Repeat this step on both  G parts.

K

M

5.
Screw the  Lparts in the shown holes of the  G <part, using the Allen key ( M ).
Repeat this step on both  G parts.
6.
Place the  J part into the  C part and press it down gently.
Repeat this step on all  C parts.

L

M

J

C

7.
Place the  C part in the shown holes of the  B part.
Repeat this step on all  C parts.
8.
Place the  E part in the shown holes of the  B part.
Repeat this step on both  B parts.

C

E

9.
Place the  G part in the shown holes of the  C parts.
Make sure that the tapered holes are pointing upwards.
10.
Screw 3 x
K parts into the shown holes of the  G part using the Allen key ( M ).
Repeat this step on both  G parts.

G

K

M

11.
Screw the  Lparts in the shown holes of the  G part using the Allen key ( M ).
Repeat this step on both

Gparts.
12.
Place the  F part into the  Eparts. Screw 2 x

Iparts in the shown holes of the

Fpart using the Allen key ( N). Repeat this step for both  Eparts.

L

M

E

N

I

13.
Secure the  Iparts into the  Cpart.
14.
Screw the 
Ipart into the hole of the  Cpart. Repeat this step on all  Cparts.

I

I

I

15.
Turn the table over (2 persons recommended).
16.
Screw the  Dparts to the tabletop using the  Hparts.
NOTICE
Make sure the table is upright
when mounting the base.

 CARE & MAINTENANCE 
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information on
AAT 10 by scanning the QR code
You can also find the same information here
hay.dk/downloads

22122021
Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
www.hay.com