Uplift Desk ACU069 User manual

© UPLIFT Desk • 800-349-3839 • [email protected] • upliftdesk.com
Corners for 3-Sided Acoustic Privacy Screen
ACU069
Package Contents to be used in conjunction with
Acoustic Privacy Panel Mounting Hardware
(ACU062)
UPLIFT Acoustic Privacy Panels
Step 1
Attach the rear Acoustic Privacy Panel per the instructions
provided with the ACU062 mounting hardware. Center the
long panel on the back of the desktop and secure in place with
the panel mounting hardware.
It is important that this panel is centered.
Step 2
Attach one side panel loosely, and slide towards the front of the
desk as far as it will go.
Step 3
Press the Long H-Channel connectors onto the side-edges of
the rear privacy panel ensuring they are centered between the
top and bottom of the panel.
Repeat the process for pressing the Short H-Channels onto the
side-edge of both side privacy panels.
Corners
(qty 2, left & right)
Long H-Channel
(qty 2)
Short H-Channel
(qty 2)
Step 4
Prepare both the Corners by bending them inward at each
groove as shown to form the panels into a curved shape.
This process will make the Corners more pliable and help in the
next steps when they are attached to the back and side panels.

© UPLIFT Desk • 800-349-3839 • [email protected] • upliftdesk.com
CAUTION: Read all instructions before assembly. Failure to assemble properly may result in damage.
CAUTIONS & WARNINGS
!
!
Copyright Notice: This guide is a component of the UPLIFT Desk Product. This guide is a part of the scope of delivery, even if the item is resold. This guide is also available on the UPLIFT Desk website: upliftdesk.com. Ex-
cerpts or copies may not be forwarded to third parties or used in any other published form without the prior written consent of UPLIFT Desk. These instructions are subject to United States copyright law.
©
AI-ACU069-1.0
Step 5
With the vertical grooves in the panel facing away from the
desktop, press the long edge of the Corner into the Long
H-Channel on the back privacy panel. Position the corner so
that the small rectangular cut out in the Corner sits on top of
the corner of the desktop
Step 6
Slide the side privacy panel back and insert the short side of
the Corner insert into the Short H-Channel. Then press the side
privacy panel against the desktop and secure the mounting
hardware clamps.
Repeat all steps on the other side of the desk to connect the
second Corner to the back privacy panel and the other side
privacy panel.