Hay T12 User manual

– INSTRUCTION MANUAL –
DESIGN BY HAY
T12

 INSTRUCTION MANUAL 
L160 X W80 / L200 X W95 /L200 X W120 CM
L250 X W95 / L250 X W120 CM

 PARTS 

B Frame profile x2

A Tabletop x1

D Leg x4

F End cap x4

C Frame profile x2

G Allen key x1

H Allen key x1

K Set screw x16

E Corner knot X4

I Allen key x1

J Screw x16
(

J Screw x20 / W120 CM)

Protect the tabletop from scratches and other damage while assembling.

1.
Slide the  F part into the  Dpart.
Repeat this step for all  Dparts.

2.
Screw the  Epart onto the  Dpart, using the G part.
Repeat this step for all  Dparts.

3.
Place  Band  Cparts into the  Epart.
Repeat this step for all  Eparts.

4.
Screw 4 x  Kparts onto the  Epart using the  I part.
Repeat this step for all  Eparts.

5.
Place the tabletop  Aon top of the frame.

6.
Screw the  C,  Dand  Eparts together with the  Jparts,
using the  Hpart to securely fasten the screws.

7.
Done!

 INSTRUCTION MANUAL 
L320 x W95 /L320 x W120 CM
L400 x W95 / L400 x W120 CM

 PARTS 

B Frame profile x4

A Tabletop x1
(

A Tabletop x2 / L400 CM)

D Leg x6

F Side knot x2

C Frame profile x2

H Allen key x1

I Allen key x1

L Set screw x24

E Corner knot x4

J Allen key x1

K Screw x32
(

K Screw x36 / W120 CM)

G End cap x6

M Crossbar x1

Protect the tabletop from scratches and other damage while assembling.

1.
Slide the Gpart into the Dpart.
Repeat this step for all  Dparts.

2.
Screw the E part onto the Dpart, using the Hpart.
Repeat this step for all  Dparts.

3.
Place  B and  C parts into the

E part.
Repeat this step for all  E parts.

4.
Screw 4 x  L parts into the  E part using the  J part.
Repeat this step for all  E parts.

5.
Screw the  Fpart to the  D part, using the  Hpart.
Repeat this step for both

Fparts.