KOBLE Anders Smart Desk User manual

Anders Smart Desk
Assembly Instructions
Issue 1 - 28/12/2021
Thank you for purchasing the Anders Desk. In order to make the best use
of this product and to use it safely, please read the manual carefully before use and
Thank you for keep it for future reference.
STOCK REF. : DOAND
Imported By: Koble Designs(Justwise Group Ltd). CB11 3AP.

MAIN COMPONENTS
Please check you have all the parts listed below
For missing or damaged parts, call our Customer Helpline: 01799 513466 or email
[email protected]
1
1Top Qty 1
(1200x480x16mm)
Base Panel Qty 1
(1200x480x16mm)
2
Side Panel (Right) Qty 1
(98x479x16mm)
4Divider Qty 1
(441x98x16mm）
5
Side Panel (Left) Qty 1
(98x479x16mm)
3
Drawer Front (Right) Qty 1
(579x92x16mm)
6
7Drawer Front (Left) Qty 1
(579x92x16mm)
Back Panel Qty 1
(1176x108x5mm)
89Drawer Side (Left) Qty 2
(325x75x12mm)
10 Drawer Side (Right) Qty 2
(325x75x12mm)
Drawer Back Panel Qty 2
(525x75x12mm)
11 Drawer Base Qty 2
(328x535x5mm)
12
Leg (Left) Qty 2
(650mm)
13 Metal Support Qty 2
(420x380mm)
15 Stretcher Qty 1
(890mm)
16
Leg (Right) Qty 2
(650mm)
14

Please check you have all the parts listed below
For missing or damaged parts, call our Customer Helpline: 01799 513466 or email
[email protected]
The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
2
Tools needed (Not supplied)
Screwdriver Tape Measure Hammer
M6*40
Large Cam Dowel Qty 6 Φ8*30 Wooden Dowel Qty 12 Φ15*12 Large Cam nut Qty 6
Self adhesive covers Qty 28
A B C D E
Corner bracket Qty 6
M6*16 Allen Screw Qty 16 M6*45 Allen Screw Qty 2
FG
M4 Allen Key Qty 1
HK
Drawer Slider Qty 4
M6*34
Small Cam Dowel Qty 16
LM
Φ12*10.5
Small Cam nut Qty 16
Screw Qty 6
NQ
M3.5*12 Screw Qty 16
M6 Split Lock Washer Qty 16 M6 Washer Qty 16
U
RS
Power Adapter 150cm Qty 1 Wireless Charging Coil Qty 1
P
Handle Qty 2
J
T
Cable Clips Qty 3
Fixings, Fittings And Tools

Main Component Diagram
For missing or damaged parts, call our Customer Helpline: 01799 513466 or email
[email protected]
3
Left
Right
x2
1
3
4
5
8
9
11
12
14
13
14
13
15
15
2
10
6
7
16

4
Assembly Steps
Step 1
A
Cam Dowel Qty 6
A
Wooden Dowel Qty 12
B
B
Step 2
Wireless Charging Coil Qty 1
Q
1
1
2
UNDERSIDE
A
A
B
B
A
B
B
A
B
A
A
B
B
B
B
B
B
B
Shown upside down.
Q
Push firmly
down
Turn knob
to secure
A B
UNDERSIDE
IMPORTANT
Push wireless charging coil firmly down.
Maintain pressure and turn central
knob to secure
Q
FRONT
BACK
Groove

5
Assembly Steps
Drawer Slider Qty 4
J
M3.5*12 Screw Qty 8
L1
Step 3 L1 L2
L
Release plastic
lever to separate
drawer runners
into two sections.
Pull apart.
L1
L
J J
Front
Back
Note hole locations for
screws .
J
J
L1
L1
L1
L1
J
J
J
J
UNDERSIDE
3
4
5
5
Turn
over
Front
Back
Note hole locations for
screws

Large Cam nut Qty 6
C
6
Assembly Steps
Step 4
Step 5
C
M4 Allen Key Qty 1
U
Screw Qty 6
F
F
U
1
3
4
5
8
2
UNDERSIDE
UNDERSIDE
Shown upside down.
Shown upside down.
FRONT
LEFT
RIGHT
BACK
FRONT
BACK
Hole this end
Groove
at back
C
C
F
C

Self adhesive covers Qty 12
R
7
Assembly Steps
Step 6
Step 7
R
FRONT
BACK
R
R
2
Shown upside down.
Use self adhesive stickers
to cover fixing holes.
R
14
13
15

8
Assembly Steps
Step 8
Step 9
FRONT
BACK
D
M
N
Shown upside down.
Shown upside down.
M4 Allen Key Qty 1
U
M6 Washer Qty 8
N
M6 Split Lock Washer Qty 8
M
M6*16 Allen Screw Qty 8
D
M6 Split Lock Washer Qty 8
M
M4 Allen Key Qty 1
U
M6*16 Allen Screw Qty 8
D
UNDERSIDE
13
13
14
14
15
15
D
M
N
U
U
2
UNDERSIDE
2
M6 Washer Qty 8
N
D
M
N
D
M
N

FRONT
BACK
UNDERSIDE
2
9
Assembly Steps
Step 10
Shown upside down.
M4 Allen Key Qty 1
U
M6*45 Allen Screw Qty 2
E
E
16
U
E

M6*34
Small Cam Dowel Qty 8
G
Φ12*10.5
Small Cam nut Qty 4
H
10
Assembly Steps
Step 11
Step 12
Step 13
G
H
x2
x2
x2
67
9
10
10
G
G
G
H
Ensure grooves
are aligned
10
9
12
11
9

Φ12*10.5
Small Cam nut Qty 4
H
H
J
M3.5*12 Screw Qty 4Drawer Slider Qty 1
L2
Self adhesive covers Qty 8
R
11
Assembly Steps
Step 14
Step 15
R
x2
x2
J
J
Front
Back
hole locations for
screws .
L2
L2
J
J
J
J
H
K
K
K
Handle Qty 2
6
7

12
Assembly Steps
Right
Left
Adjustment alignment as
required fully tighten.
Step 16
Engage
drawer
runners.
L2
L1
6
7

P
Q
Q
S
Corner bracket Qty 6 Power Adapter 150cm Qty 1
P
13
Assembly Steps
S
S
Shown from back
Use Cable Clips to route the
power cable as required
T
tidy clip .
A B
T
Fixed
Route cable
through cable
T
Cable Clips Qty 3
Step 17
P

Wireless charging function
If you have a wireless charging compatible phone, please put the phone on the wireless
charging indicator and check if the phone is successfully connected to the charging function.
If not, move the mobile phone around the logo until the connection is successful.
Some phone cases may inhibit the wireless charging function or it's efficiency. It may be
necessary to remove the phone case if difficulties with charging are experienced.
Wireless charging will only work with wireless charging compatible mobile devices.
Technical Specification
Working voltage: DC 5V/2A
Wireless Charging:5W
Power Supply: AC adapter,100-240V~50/60Hz
14
Wireless
Charging
Location

Safety and Care Advice
1.The maximum weight that can be placed on this product is 30KG
2.This product must not be used as a seat.
3. Always use the original AC power adapter and power cable, otherwise it may cause slow
Function
7.Do not expose the product to dust or smoke.
8.If the product will not be used for a long time,please unplug the power.
9. When using the product ,if smoke appears,or if there is a peculiar smell,please turn off the
power,pull out the socket and seek professional help.
10.Pull out the plug before cleaning the surface of the product. It can be cleaned with a damp
cloth and soap.
6.Keep the product away from containers holding liquid.If any liquid enters into the product,
it may be damaged.
5.Do not expose the product to damp or moisture.
4. In order to avoid accidents, do not open any electrical covers. Refer to a professional if the
circuit is faulty.
wireless charging,In extreme cases,an incompatible AC power adapter may burn out.
Wireless charging function
Trouble shooting
If any failure occurs, please refer to the following solutions, to help solve the problem.
If these are of no help, please contact the customer service helpline.
PROBLEM PROBLEM CAUSE REMEDY
No power display
No wireless
charging
Power plug not inserted properly.
There is no power in the socket.
The power is not switched on.
Power not connected.
Mobile device does not have wireless charging
function.
Check plug.
Check power supply.
Turn on the power socket.
Check power is connected and on.
Check your mobile debice has wireless
Remove any cover from your mobile device.
charging capability.
Disposal
If disposal of this product becomes necessary, please do this in an environmentally
responsible way. Contact your local government office or authority for suitable disposal or
recycling options in your local area. Do not dispose of this product, or it's components, with
your general domestic waste.
15

After Sales Support / Product Returns
16
Purchased from kobledesigns.com
In the unlikely event that you need to return the unit because it is faulty, please follow the
replacements or faulty items instructons at www.kobledesigns.com website.
Should you need to request replacement parts, please contact our after sales support team at:-
Email - [email protected]
Tel: + 44 (0)1799 513 466
Address: Koble Designs, 6 The Shires, Shirehill industrial Estate, Saffron Walden, Essex, CB11 3AP
Purchased from other retailer
If you purchased your product from one of our retail partners, please refer back to the retailer
directly, for any customer services related issues, refunds or returns requests.
Koble designs may still be able to offer support with technical related queries.