Haylou T15 User manual

HAY LOU
Haylou-TlS
lWS BT Earphones
UserManual

1
Overview
A Mic
'te::; Panel
LED

2
What's in the Box
EartipsX3 pairs(middle size eartips have been
put on already), Bluetooth earbuds, charging case
charging cable, user manual
Basic Parameters(earbuds)
Operation range: lOm(open space with no obstacle)
Battery capacity: 43mAh(single earbud)
Charging time: approx. l.Shr
Calling time:
approx. 3.5hr
Standbytime: approx. lS0hr
Input parameter: SV =l00mA
Battery type: Ii-ion
Bluetooth version: 5.0
Basic Parameters (case)
Input parameter:SV =l000mA
Output parameter.SV=S00mA
Charging time: approx. 3hr
Standbytime: approx. 4 months
Battery capacity: 2200mAh
Battery type: cylindrical battery

3
How to wear
(»c.~ ~1
Please keep Mic
outside when calling
When calling, adjust Mic towards mouth to gain
bettertalking experience.
How to Charge
Prior to using,please peel offsticker covering the
pogo pins and top up the earphones.
Sticker

4
Power-on
Take out earbuds from the case to power on them.
Or keep touching panels for ls to power on earbuds
( LED glows solid white) when they are not in the case.
LED glows ~ Keep touching
so~~b ~ ~~b~
Power-off
Put earphones into the case to poweroffthem.
Or keep touching both panels for Ss to power off
earphones ( LED glows solid red for 2s ).
LEDglows B
solid redfor2s Keep touching
panel for5s

5
Stereo Mode
Auto pairing: take out both EarBuds from the case
and they will auto pairwith each other in 2 or 3s.
Earphones will be connectable to cellphone when
LED on either EarBud blinks white slowly. On cellphone,
search for
II
Haylou-TlS
II
and tap to connect.
If
earbuds fail to be connected to cellphone, please
putthem back to the case and repeat the above steps.
Earbuds will auto reconnect to the last device in
connectivity records, if any. (Bluetooth faculty needs to
be activated).
Note: earbuds have been set to factory since shipping
out.
[J
LED ~7
-
..
Keep touching =-
panels for ls -- _,_
to power on --
c;:,,_ru (i)Haylou-T15
Manual pairing: manually power on two earbuds and
theywill auto pair with each other when LED blinks
white promptly. Then either LED will blinkwhite slowly
and now you can tap iton cellphone to connect.

6
Mono Mode
Auto connecting: take out either earbud from the
case to power on it. LED will then blink white
slowly. On cellphone, search for Haylou-TlS and
tap to connect. Once power on earbuds will auto
reconnect to last device in connectivity records,
if any.
Manuallyconnecting: manually power
on eitherearbud.
Its
LED will soon blink white slowly then search for
Haylou-TlS on cellphone and tap to connect.
Functions
Double touch left earbud
Skip track backward
Double touch right earbud
Skip track forward
Touch eitherearbud
Resume playing/pause music
(when standby)
Double touch either earbud
Answer/end incoming call
Keep touching either earbud
for ls
Reject incoming call
Triple touch left earbud
Activate voice assistant
(when standby)
Triple touch right earbud
Activate ultra-low lag gaming
mode

7
LEDs on Charging Case
Battery LEDs
All three battery LEDs will blink3 times then
numbers ofthem will glow solid for 30s accordingto
practical battery level whenever you open or close lid.
(If you need to check battery level again, please close
and re-open the lid again.)
Low batterywarning: only one LED blinks white.
Battery Level Display:
Battery LEDs Battery level
Top-up
2/3
1/3
Low battery

8
LED will glow solid red when charging and turn off
once the case is topped up .
Caveats
...._-:;;.:::-,,,;;~~!'_ - Charging: solid red
Top up: turn off
1. Never disassemble ormodifyyour headset for any
reasons to avoid any damages and danger.
2. Do notstore the headset in extreme temperatures
(under O'C orover 45'C).
3. Avoid using the indicator close to the eyes of
children or animals.
4. Do not use this headset during a thunderstorm to avoid
irregular function and increased risk of electricshock.
5. Do not use harsh chemicals orstrong detergents to
clean the headset.
6. Keep the headset dry.

9
0 Factory Setting
If earphones do not function well, please refer the
following steps to reset factory: take earbuds out
from the
case. Power offthe earphones then touch
both panels forabout 15s (LED will blink red and
white three times twice). Ater that, put them back to
the case. Delete connectivity record on cellphone
before processing another pairing (All connecitvity
records relating to the earbuds will all be removed).
0 Audio only outputs from single earbud
It's really rare. PleaseresetGTl Pro, removeconnectMty
record on your cellphone and re-connect the
earphones to your cellphone.
0 Other cases in charging
LED glows solid white for 1minute when earbuds
are topped up.
Carry case cannot charge earbuds, if its battery drains.
LEDs on carry case will turn off once the case is
topped up. If you charge it once again, LEDs will
not give any notice, which does not mean the case
is not charged.

10
Daily maintenance
Please do not shower with earbuds. Do not wear them
in rainy day. Do not leave them in washing machine
or other extreme situations. Clean them with dry cloth
after use in pursuing a longer service life.

11
Tips
1. Before using the headset, please read the manual
carefully
and keep it for future references.
2. The headset need to be fully charged priorto
first-time use.
3. Ifthe headset is left unused for over two weeks,
please recharge it periodically.
4. Please use the chargers made by qualified
manufacturer.
5. Ifthe headset cannot be found by your phone,
please check whether it is in pairing mode; if left
unconnected fora longwhile, the headset will exit
pairing mode, please re-enter the mode; ifa procedure
errorofyour phone occurs, reboot i~ ifa procedure
error ofthe headsetoccurs, reboot or reset it.
Address: Suite 1303, 1305 and 1306, 13/F, Project Phrase
2of Gaosheng Tech Tower, Gaosheng Tech Park,
No.5 Longxi Road, Zhouxi Community, Nancheng
District, Dongguan City, Guangdong. China.
Manufacturer: Dongguan Liesheng Electronic
Co.,Ltd.
Web: www.haylou.com
Made In China

12
Part
Hazardous substances and their
contents in the item
Hazardous Substances
c,
Name
Pb Hg Cd
(VI)
PBB PBDE
□ IBP
DEHP DBP BBP
Main body X 0 0 0 0 0 0 0 0 0
Battery 0 0 0 0 0 0 0 0 0 0
Eartips
0 0 0 0 0 0 0 0 0 0
Accessories
0 0 0 0 0 0 0 0 0 0
cti;;&~g
X 0 0 0 0 0 0 0 0 0
This form is made by SJ/T 11364 regulation.
O: means that hazardous substance content in the
homogeneous materials of this part is within the
limits of (EU) 2015/863 regulation.
X: means that hazardous substance content in ,at least,
one certain homogeneous material of this part is
beyond the limits of (EU) 2015/863 regulation ,but
there is no mature alternative in the industry at present,
it still conforms to the EU ROHS Directive in the scope
of exemption.
Notes: Please arrange using time properly as your hearing
may be damaged by using the device for a long time.
0. ( E: =E)= :a O FCCID:2AMQ6-T15
MADE IN CHINA RoHS -CMIIT ID: 2019DP9376

13
Aftersales & Support
Warranty Period:
12 months after purchase
(please keep your receipt properly)
Free Service:
If any quality defects happen duringthe warranty period,
please take the receipt and contact with your distributor
for
aftersales service.
Following cases or any damages/defectsthat are notdue to
quality issue are not covered in the warranty.
1. Any defects or damages caused by natural disasters,
abnormal voltage orother environmental facts.
2. Any unauthorized disassembly, modification orchange
of parts.
3. Any damagescaused by improper use of the product
includingsoaking, corroding, falling down, squeezing or
exposure to abnormal temperature or humidity.
Model Number:
Date of Purchasing:
User's Name:
User's Phone:
User's Address:
Shop's Name:
Shop's Address:
Comments:
Click Here To Read More...
Haylou T15 TWS BT Earphones