Haylou MoriPods User manual

Haylou MoriPods
True Wireless Earbuds
User Manual

Overview
Mic 1
MFB
LED
LED
Type-C charging port
Mic 2
Charging
contacts

How to Wear
Gently insert the earbud into the ear canal,
adjust the earbud to the most comfortable
wearing state.
When calling, adjust Mic 2 towards mouth to
gain better talking experience.

How to Charge
Plug in the charging cable to charge the earbuds
and the charging case at the same time.
The charging indicator light will be solid red
when the charging case is not fully charged.
The indicator light goes out after fully charged.
For first time use, please remove the isolation
film on the charging contacts of both earbduds.
Then fully charge the charging case and earbuds.
Remove
isolation film

Power-on
1. The earbuds will auto power off when put in
the charging case.
2. Keep touching the MFB button for 1.5s, then
release and keep touching the MFB button
again for 2s to power off.
Power-off
1. Take out to auto power on when the earbuds
are in case.
2. If earbuds are out of case and in power-off
state, keep touching the MFB button for
about 1.5s to power on.
Keep touching for
about 1.5s
LED glows white
for 1s

Haylou MoriPods
10:00 4G
Bluetooth
Turn on Bluetooth
Visibility
Visible to all Bluetooth devices nearby
Device name
Available Devices
How to Pair
Take two earbuds out from the charging case
simultaneously, then open device Bluetooth and
search "Haylou MoriPods" , finally click it to
complete the connection.
Put the earbuds back to the charging case and
repeat the above operation if the connection fails.
After the first connection, the earbuds can be
automatically connected to the last paired
device (Bluetooth needs to be turned on).
Switch between mono and stereo mode: It is
stereo mode after two earbuds are successfully
connected. Put one back into the case to power
off, the other will enter mono mode. Or pick it up
again to resume stereo mode.

Manual connection: when earbuds are turned
off, manually turn on both of them. Wait 2-3
seconds for them to turn on and connect to each
other. Turn on device Bluetooth to connect
when lights on both earbuds flash white slowly.

Functions
Short touch MFB button
Answer incoming call
Reject/hang up incoming call
Skip track backward
Skip track forward
Long touch MFB button for 1.5s
Wake up voice assistant when
standby
Triple touch left MFB button
Turn on/off game mode
Triple touch right MFB button
Double touch left MFB button
Play/pause music
Short touch MFB button
Double touch right MFB button

Factory Setting
1. Put the earbuds back into the charging case
and keep the charging case fully charged.
Then take out the left and right earbuds
simultaneously.
2. Quickly and continuously click the left and
right earbuds MFB buttons 5 times at the
same time.
3. Clear the phone pairing record and complete
the connection again.
Common abnormals:
1. One of the earbuds is mute:
Try to put the mute earbud into the charging
case and then take it out;
If the problem is still not solved after the
above operation, try the reset steps;
2. The earbud cannot be charged:
Check whether the charging case has
sufficient power;
Wipe the charging contacts with a dry cloth
or cotton swab;
3. The earbud cannot automatically disconnect
from the mobile phone;
Check whether the charging case has
sufficient power. The earbud will not power
off if the case is out of power and will not
disconnect from the mobile phone.

Package List
Earbuds, charging case, charging cable,
user manual.
Basic Parameters(earbuds)
Operation range: 10m (open space with no
obstacle)
Battery capacity: 35mAh(single earbud)
Charging time: approx. 2hr
Talk time: approx. 5hr
Standby time: approx. 50hr
Input parameter: 5V 70mA
Battery type: li-ion
Bluetooth version: V5.2
Basic Parameters(charging case)
Input parameter: 5V 500mA
Output parameter: 5V 100mA
Charging time: approx. 2hr
Battery capacity: 310mAh
Battery type: li-ion

Caveats
Warning
1. Do not disassemble, repair or modify the
product for any reason, as this may cause fire
or even completely destroy the product.
2. Do not expose the product to environments
where the temperature is too low or too high
(below 0°C or above 45°C).
3. Keep the indicators away from the eyes of
children and animals while using the
earphones.
4. Do not use this product during thunderstorms.
Thunderstorms may cause the product to
malfunction and increase the risk of electric
shocks.
5. Do not wipe and clean the earphones or their
case with alcohol or other volatile liquids.
6. Avoid any contact with liquids.
Note
1. Please read this user manual carefully before
using the product and please properly store
it.
2. When using for the first time, please fully
charge this product.
3. Please charge the product, in case it has not
been used over two weeks.

4. Please use certificated charger.
5. Do not wear earphones for a long term to
protect your hearing.
6. Do not wear earphones in any situations with
potential risks as wearing them may reduce
your perception to the outside world.
FCC Requirement
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference;
2. This device must accept any interference
received, including interference that may
cause undesired operation.
Daily maintenance
Please do not shower with earbuds. Do not
wear them in rainy day. Do not leave them in
washing machine or other extreme situations.
Clean them with dry cloth.

Model Number
Date of Purchasing
User' s Name
User' s Phone
User' s Address
Shop' s Name
Shop' s Address
Comments
Warranty Card
Warranty Period
12 months after you purchase this item.
( or you may inquire your local shopper for
more details.)
Free Service
Supposing any defects caused by quality issues
occur within the warranty period, please take
this warranty card and purchase receipts to
your distributor for free exchange service.
Free exchange service will not be accessed
under following circumstances:
1. Damages caused by unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by act of God.
Supposing your item is within any damages or defects
except the above circumstances, please return to us or
your distributor for free repairing.

ISED Statement
This device contains licence‐exempt transmitter(s)
/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence‐
exempt RSS(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device. ADVERTENCIA IC Cet appareil contient des
émetteurs / récepteurs exemptés de licence conformes
aux RSS (RSS)d'Innovation, Sciences et Développement
économique Canada. Le fonctionnement est soumis
auxdeux conditions suivantes :
(1) Cet appareil ne doit pas causer d'interférences.
(2) Cet appareil doit accepter toutes les interférences,
y compris celles susceptibles deprovoquer un
fonctionnement indésirable de l'appareil.
This device complies with ISED RF radiation exposure
limits set forth for an uncontrolled environment.