Haylou GT6 User manual

Haylou GT6
True Wireless Earbuds
User Manual

Overview
LED
MFB
LED
Type-C
charging port
Mic
Charging
contacts

How to Wear
Gently insert the earbud into the ear canal,
adjust the earbud to the most comfortable
wearing state.
When calling, adjust Mic towards mouth to gain
better talking experience.

How to Charge
Plug in the charging cable to charge the earbuds
and the charging case at the same time.
The charging indicator light will be solid red
when the charging case is not fully charged.
The indicator light goes out after fully charged.
For first time use, please remove the isolation
film on the charging contacts of both earbduds.
Then fully charge the charging case and earbuds.
Remove
isolation film

Power-on
1. Put back to charging case to auto power off.
2. When in power-on state, keep touching the
MFB button for about 4.5s (LED glows solid
red for 2s).
Power-off
1. When the earbuds are in the case, take them
out to auto power on.
2. If earbuds are out of case and in power-off
state, keep touching the MFB button for
about 1.5s to power on.
Keep touching for about 1.5s
LED glows white for 1s
Keep touching for about 4.5s
LED glows solid red for 2s

Haylou GT6
10:00 4G
Bluetooth
Turn on Bluetooth
Visibility
Visible to all Bluetooth devices nearby
Device name
Available Devices
How to Pair
Automatic connection: Take two earbuds out
from the charging case simultaneously, the
earbuds will power on and connect with each
other within 5s. When lights on both earbuds
flash white slowly, open device Bluetooth and
search "Haylou GT6", finally click it to complete
the connection.
Put the earbuds back to the charging case and
repeat the above operation if the connection
fails. After the first connection, the earbuds can
be automatically connected to the last paired
device (Bluetooth needs to be turned on).

Switch between mono and stereo mode:
It is stereo mode after two earbuds are
successfully connected. Put one back into the
case to power off, the other will enter mono
mode. Or pick it up again to resume stereo
mode.
Manual connection:
When earbuds are turned off, manually turn on
the two earbuds. Wait 5s for the earbuds to
turn on and connect with each other. When
lights on both earbuds flash white slowly, turn
on device Bluetooth to connect.

Functions
Short press MFB button
Answer/End call
Triple click MFB button
Summon voice assistant when standby
Double click left MFB button
Turn on/off low latency mode when
playing games
Short press MFB button
Play/Pause music
Double click right MFB button
Skip track forward
Answer the Second Call
When there is a new incoming call during a call, click
the MFB button to keep the first call and answer the
second call, then double click the MFB button to
switch back to the first call and keep the second call.
During a three-party call, click the MFB button to
hang up the current call.

Factory Setting
1. The earbuds are charging in the charging case
(light glows solid red or white after fully
charged within 1 minute).
2. Long press the two earbuds simultaneously
for about 10s, release after LED alternately
flashes red and white 3 times.
3. Take the earbuds out from the charging case
until LED flashes white slowly.
4. Clear phone pairing records, follow the pairing
steps to complete Bluetooth connection.
Audio only Outputs from Single Earbud
It's unusual indeed, please refer to the following
operation steps if the situation occurs:
1. Put the earbuds back into the charging case,
and then take them out again to connect.
2. Refer to the reset steps to reconnect the
Bluetooth device.
Other Charging Problems
1. White indicator light goes out after 1 minute.
The earbuds have been fully charged.
2. When the charging case is out of power, the
earbuds cannot be charged and keep the
original connecting status.
3. The indicator light will go out after the
charging case is fully charged.

Package List
Earbuds, charging case, user manual.
Basic Parameters(earbuds)
Operation range: 10m (open space with no
obstacle)
Battery capacity: 35mAh(single earbud)
Charging time: approx. 1.5h
Talk time: approx. 4h
Standby time: approx. 60h
Input parameter: 5V 100mA
Battery type: li-ion
Bluetooth version: V5.2
Basic Parameters(charging case)
Input parameter: 5V 500mA
Output parameter: 5V 150mA
Charging time: approx. 2h
Battery capacity: 310mAh
Battery type: li-ion

Caveats
Warning
1. Do not disassemble, repair or modify the
product for any reason, as this may cause fire
or even completely destroy the product.
2. Do not expose the product to environments
where the temperature is too low or too high
(below 0°C or above 45°C).
3. Keep the indicators away from the eyes of
children and animals while using the
earphones.
4. Do not use this product during thunderstorms.
Thunderstorms may cause the product to
malfunction and increase the risk of electric
shocks.
5. Do not wipe and clean the earphones or their
case with alcohol or other volatile liquids.
6. Avoid any contact with liquids.
Note
1. Please read this user manual carefully before
using the product and please properly store
it.
2. When using for the first time, please fully
charge this product.
3. Please charge the product, in case it has not
been used over two weeks.

4. Please use certificated charger.
5. Do not wear earphones for a long term to
protect your hearing.
6. Do not wear earphones in any situations with
potential risks as wearing them may reduce
your perception to the outside world.
FCC Requirement
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference;
2. This device must accept any interference
received, including interference that may
cause undesired operation.
Daily maintenance
Please do not shower with earbuds. Do not
wear them in rainy day. Do not leave them in
washing machine or other extreme situations.
Clean them with dry cloth.

Model Number
Date of Purchasing
User' s Name
User' s Phone
User' s Address
Shop' s Name
Shop' s Address
Comments
Warranty Card
Warranty Period
12 months after you purchase this item.
( or you may inquire your local shopper for
more details.)
Free Service
Supposing any defects caused by quality issues
occur within the warranty period, please take
this warranty card and purchase receipts to
your distributor for free exchange service.
Free exchange service will not be accessed
under following circumstances:
1. Damages caused by unauthorized
disassembly.

Manufacturer: Dongguan Liesheng Electronic
Co., Ltd.
Address: Room 401-410, Building 1, No.
86 Hongtu Road, Nancheng District,
Dongguan City, Guangdong, China
2. Defects or physical damages caused by
leaking or dropping off.
3. Damages by act of God.
Supposing your item is within any damages
or defects except the above circumstances,
please return to us or your distributor for free
repairing.