Haylou G3 User manual

HAYLOU G3
使用说明书
真无线蓝牙游戏耳机

1. Open the lid of the charging case, the
earphones enter pairing mode.
2. Select “Haylou G3” on the new Bluetooth
device list and tap it to pair.
3. Haylou G3 is now paired.
01 Bluetooth Pairing
Pairing Mode
Left Right
* Haylou G3 will automatically power ON when the charging case is opened.
** Put the earbuds into the charging case and close the lid, they will automatically power o
Haylou G3
Not Connected i
Bluetooth
MY DEVICES
Settings
Bluetooth
Touch sensor
Press for 2 secs
Press for 10 secs
Basic Control
02 Touch Sensor
Power ON*
Power OFF**
10s
2s

*If the operation is unsuccessful, please repeat the above steps; or log in to the ocial agship
store, contact customer seice, and view the reset operation video.
1. Put the earbuds back into the charging case and ensure the earbuds have sucient power;
3. Press and hold again for 5s; please do not release when LEDs ash other color during the
process; after 5s, LEDs ash rose red twice and the reset is completed;
2. Press and hold both earbuds for 10s to power o, then release after LEDs ash rose red twice;
4. Close the charging case after reset; open the charging case again to pair after the breathing
lights of the earbuds are on;
Playback Control
* You can only switch between Music/Cinema Mode after turning OFF Gaming Mode.
Play/pause
Skip track backward
Skip track forward
Call Control
Tap once
Double tap the left earbud
Double tap the right earbud
Enter/exit gaming mode*
Hang up a call
Reject an incoming call
Switch a third-pay call
Music/cinema mode
LEFT
RIGHT
Press and hold the left earbud
Press and hold the right earbud
Answer an incoming call
Tap once
Tap once
Double tap
Double tap
Restore Facto Settings

03 Led Status
RGB LED
Pairing mode
Power on
Pairing is successful, connect the
mobile device
Play music (in music/cinema mode)
Gaming mode
Low batte (less than 10%)
The earbuds are fully charged
Flash yellow and rose red alternately
Flash blue 3 times
Flash yellow
Yellow breathing light eect
Green breathing light eect
Flash red periodically
The charging case is closed and
the earbuds are charging Yellow breathing light eect
LED goes out
Left Right

05 Charging
1.Connect the Haylou G3 charging case to a power source with the provided charging
cable.
2.The earbuds and the charging case should be fully charged in around 2 hours.
3.More than 4 hours of playtime when fully charged, up to 20 hours of playtime
with a fully charged charging case.
4.Put the earbuds into the charging case, and they will sta charging after closing
the lid.
*Please make sure to remove the insulation lm on the earbuds before charging.
Warning：The rechargeable batte contained in this product must be properly disposed of in
order to be recycled. Please do not put the batte in the re to avoid explosion.
Recommendation： In order to maintain a good level of peormance of the lithium batte in this
product, it should be charged once eve three months even it is not in use.
04 Charging Case
Power display of charging case
Low batte (less than 10%)
The charging case is fully charged
4-stage breathing light
eect display
When opening the lid, LED of
the charging case ashes 3 times
Charging case is charging The running water light eect
displays the power in real time
LED goes out
LED indicator

06 Product Specications
Brand name: HAYLOU
Product model: G003
Product description: true wireless gaming earbuds
Bluetooth pairing name: Haylou G3
Bluetooth version: Bluetooth5.2
Sound modes: game/music/cinema
Low latency: 45ms*
Frequency response: 20Hz - 20,000Hz
Driver parameters: 13mm composite diaphragm dynamic driver
Earbud batte capacity: 45 mAH
Charging case batte capacity: 500 mAH
Charging time: ≤ 2 hours, The charging time of the earbuds and the charging case
respectively
Box content:Charging case, Earbuds, Charging cable, User manual
CMIIT ID:2022DP7348
FCC ID:2AMQ6-G003
* The data tested by dierent instruments and dierent methods will be dierent.
This data is tested by the built-in Bluetooth box of AudioPrecison.

07 Troubleshoot
My G3 cannot be
charged
My G3 cannot automatically
pair with my mobile device
again after the Bluetooth
function is restaed manually.
There is no sound from
my G3
Inse the USB-C (smaller end) connector rmly
into the charging po at the rear of the charging
case. And make sure the USB-A (larger end)
connector is connected to a power source.
Make sure both ends of the charging cable are
connected properly.
If your G3 has been exposed to extreme temperatures,
please wait for it to return to room temperature
before charging.
The mobile device will need to initiate the connection by
itself after restaing the Bluetooth function. G3 will
not initiate a connection automatically.
Increase the volume on your device.
Make sure that your G3 is connected with your
mobile device, and the correct device is being
used.
T connecting to a dierent device.
Problem What to do

Warning
1. Do not disassemble, repair or modify the product for any reason, as this may
cause re or even completely destroy the product.
2. Do not expose the product to environments where the temperature is too low or
too high (below 0°C or above 45°C).
3. Keep the indicators away from the eyes of children and animals while using the
earphones.
4. Do not use this product during thunderstorms. Thunderstorms may cause the
product to malfunction and increase the risk of electric shocks.
5. Do not wipe and clean the earphones or their case with alcohol or other volatile
liquids.
6. Avoid any contact with liquids.
Note
1. Please read this user manual carefully before using the product and please
properly store it.
2. When using for the rst time, please fully charge this product.
3. Please charge the product, in case it has not been used over two weeks.
08 Precautions

09 Warranty Card
Warranty Period
12 months after you purchase this item.
( or you may inquire your local shopper for more details.)
Free Seice
Supposing any defects caused by quality issues occur within the warranty period,
please take this warranty card and purchase receipts to your distributor for free
exchange seice.
Model Number
Date of Purchasing
User' s Name
User' s Phone
User' s Address
Shop' s Name
Shop' s Address
Comments

Free exchange seice will not be accessed under following circumstances:
1. Damages caused by unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping o.
3. Damages caused by act of God.
Supposing your item is within any damages or defects except the above
circumstances, please return to us or your distributor for free repairing.

Manufacturer: Dongguan Liesheng Electronic Co., Ltd.
Address: Room 401-410, Building 1, No. 86 Hongtu Road, Nancheng District,
Dongguan City, Guangdong, China