Hayward Phantom Turbo 6000 User manual

Owner's Guide
Model 6000
•Important Safety Instructions
•Installation Instructions
•Parts List
•Warranty Registration Card
•Warranty
GUla del usuario
Modelo 6000
•Instrucciones importantes de seguridad
•Instrucciones para
la instalaci6n
•N6mina de piezas
•Tarjeta de registro de garantfa
•Garantfa

I
Im mp po or rt ta an nt tS Sa af fe et ty yI In ns st tr ru uc ct ti io on ns s
1
Use Only Genuine Hayward Replacement Parts.
W
Wa ar rn ni in ng g
R
Re ea ad dt th hi is se en nt ti ir re eO Ow wn ne er r’ ’s sG Gu ui id de eb be ef fo or re ea as ss se em mb bl li in ng ga an nd d
i
in ns st ta al ll li in ng gt th he eP Ph ha an nt to om mc cl le ea an ne er r. .F Fa ai il lu ur re et to of fo ol ll lo ow ws sa af fe et ty y
w
wa ar rn ni in ng gs sa an nd dO Ow wn ne er r’ ’s sG Gu ui id de ei in ns st tr ru uc ct ti io on ns sc ca an nr re es su ul lt ti in n
s
se ev ve er re ei in nj ju ur ry y, ,d de ea at th ho or rp pr ro op pe er rt ty yd da am ma ag ge e. .
F
Fo or ra ad dd di it ti io on na al lf fr re ee ec co op pi ie es so of ft th he eO Ow wn ne er r’ ’s sG Gu ui id de ey yo ou u
c
ca an nd do ow wn nl lo oa ad dt th he em mf fr ro om mw ww ww w. .h ha ay yw wa ar rd dn ne et t. .c co om m
o
or rc ca al ll l( (8 80 00 0) )2 22 27 7- -1 14 47 77 7. .
W
Wa ar rn ni in ng g- -R Ri is sk ko of fE El le ec ct tr ri ic ca al lS Sh ho oc ck k
The Hayward Phantom Turbo Automatic Pool Cleaner is
designed to connect to a threaded 1-1/2 inch female pipe
fitting on a dedicated return line that is powered by a 3/4 H.P.
Booster Pump. You should have a licensed electrician install
the cleaner’s booster bump. T
Th he eB Bo oo os st te er rP Pu um mp pm mu us st tb be e
i
in ns st ta al ll le ed di in na ac cc co or rd da an nc ce ew wi it th ht th he eN Na at ti io on na al lE El le ec ct tr ri ic ca al lC Co od de e
a
an nd da al ll ll lo oc ca al lc co od de er re eq qu ui ir re em me en nt ts s. .F Fa ai il lu ur re et to od do os so oc ca an n
r
re es su ul lt ti in ns se er ri io ou us si in nj ju ur ry yo or rd de ea at th h. .
W
Wa ar rn ni in ng g- -R Ri is sk ko of fI In nj ju ur ry y
F
Fa ai il lu ur re et to of fo ol ll lo ow wt th he es sa af fe et ty yw wa ar rn ni in ng gs sb be el lo ow wm ma ay yr re es su ul lt ti in n
s
se ev ve er re ei in nj ju ur ry y, ,d de ea at th ho or rp pr ro op pe er rt ty yd da am ma ag ge e. .
• Always disconnect and remove the cleaner and pressure
hose before entering the pool.
• Disconnect the Safety Rope that separates the pool’s shallow
end from the pool’s deep end, before running the Phantom.
Always reconnect the Safety Rope before entering the pool.
• Always handle with care. Do not let children or pets play with
the cleaner; it is not a toy.
• Always turn the Booster Pump O
OF FF Fbefore handling
the cleaner.
• Do not operate outside the pool. The Phantom Turbo Cleaner
and hoses contain high-pressure water jets that may
cause injury.
• Disconnect pressure hose from the universal wall fitting
before removing the cleaner from the pool.
•N
Ne ev ve er rpoint any of the cleaner’s high-pressure jets, pressure
hose, pressure gauge or sweep hose at any person or pet.
I
Im mp po or rt ta an nt tI In nf fo or rm ma at ti io on n
C
Ca au ut ti io on n- -R Ri is sk ko of fE Eq qu ui ip pm me en nt tD Da am ma ag ge e
• Always turn the Filtration Pump on b
be ef fo or re eturning the
booster pump on. Running the booster pump dry will
damage the booster pump and is not covered by the
Hayward warranty.
• Always disconnect and remove the Phantom cleaner and
hoses from the pool before cleaning or backwashing the
pool filter.
• After cleaning or backwashing the pool filter, allow the
filtration system to run for a minimum of five minutes or until
all debris has been flushed from plumbing lines before
reconnecting the Phantom cleaner.
• New plumbing lines must be flushed out before connecting
the Phantom cleaner.
• The Phantom cleaner should not be used to remove plaster
dust or construction debris from new or renovated pools.
• The Phantom cleaner should not be used to remove
excessive sand (dense debris) following wind or sandstorms.
• Always disconnect and remove the Phantom cleaner and
hoses before chemically shocking the pool.
• Only operate the Phantom cleaner for the period of time
necessary to clean the pool. Excessive use is unnecessary
and will cause cleaner parts to prematurely wear.
• Regularly inspect the cleaner and hoses; do not use if
damaged or if any rough edges are visible on the cleaner;
this can cause damage to the pool.
• Lift the Phantom cleaner by its wing (Part A, page 4), never
by the hose or bag.
D
Di is sc cl la ai im me er r
• Pool plaster is affected by age, water chemistry, etc.
•Pool plaster can deteriorate over time.
•The integrity of “good” pool plaster is such that a pool
vacuum cleaner – automatic or manual – cannot remove
the plaster.
• The integrity of “good” pool plaster is such that the plaster
will cause wear on the cleaner, the cleaner will not wear out
“good” pool plaster.
•Vinyl pool liners are affected by age, sunlight, and water
chemistry.
• Vinyl pool liners can become brittle and weak.
• Vinyl pool liners can be affected by the installation and the
pool’s surroundings.
• Patterns on vinyl pool liners vary in quality.
• When installing the Phantom cleaner, you assume
responsibility for the condition of the pool’s surroundings
and chemistry.

Use Only Genuine Hayward Replacement Parts.
C
Co on nt te en nt ts sI
In nt tr ro od du uc ct ti io on n
3
Use Only Genuine Hayward Replacement Parts.
2
I
Im mp po or rt ta an nt tS Sa af fe et ty yI In ns st tr ru uc ct ti io on ns s. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 1
D
Di is sc cl la ai im me er r. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 1
I
In nt tr ro od du uc ct ti io on n. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .3 3
F
Fo or rY Yo ou ur rR Re ec co or rd ds s. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .3 3
P
Pr ri in nc ci ip pl le eP Pa ar rt ts s. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .4 4
P
Pr re ep pa ar ri in ng gt th he eP Po oo ol l. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .5 5
Dedicated Return Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Tools Needed for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
C
Co on nn ne ec ct ti in ng gP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er rt to oP Po oo ol l. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .6 6
Installing the Universal Wall Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
A
As ss se em mb bl li in ng ga an nd dS Si iz zi in ng gt th he eR Ri ig gi id dP Pr re es ss su ur re eH Ho os se e. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .7 7
C
Co on nn ne ec ct ti in ng gt th he eR Ri ig gi id dP Pr re es ss su ur re eH Ho os se e. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .8 8
Disconnecting a Hose Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting Hose to Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
O
Op pe er ra at ti in ng gt th he eP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er r. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .9 9
Setting Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
L
La ar rg ge eC Ca ap pa ac ci it ty yD De eb br ri is sB Ba ag g. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 10 0
Attaching Debris Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Removing Debris Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Emptying Debris Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Sand (Dense Debris) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
C
Co or rr re ec ct tl ly yO Op pe er ra at ti in ng gP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er r. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 11 1
Movement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Spin-Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Sweep Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Fine Debris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Sand (Dense Debris) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Pressure Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
P
Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er rA Ad dj ju us st tm me en nt ts s. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 12 2
Changing Spin-Out Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Changing Spin-Out Cam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Adjusting Spin-Out Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Changing Top and Bottom Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Adjusting Sweep Hose Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
M
Ma ai in nt te en na an nc ce e. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 14 4
Removing Phantom Turbo Cleaner from Pool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Emptying Debris Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Cleaning the In-Line Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Sweep Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
S
St to or ri in ng gt th he eP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er r. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 15 5
Winterizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Periodic Freezing Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
T
Tr ro ou ub bl le es sh ho oo ot ti in ng g. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 16 6
B
Bo oo os st te er rP Pu um mp p. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 17 7
P
Ph ha an nt to om mT Tu ur rb bo oP Pa ar rt ts sD Di ia ag gr ra am ma an nd dR Re ep pl la ac ce em me en nt tP Pa ar rt ts sL Li is st t. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 18 8
L
Li im mi it te ed dW Wa ar rr ra an nt ty y. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 19 9
Congratulations on your purchase of the Hayward Phantom Turbo
Automatic Pool Cleaner. The Hayward Phantom Turbo is the only
Total Pool Cleaner. The Phantom Turbo is designed to not only to
clean your pool’s bottom and sides, but also to skim the water’s
surface as well – all automatically!
T
Th hi is sr re ev vo ol lu ut ti io on na ar ry yd de es si ig gn no of ff fe er rs st th he ef fo ol ll lo ow wi in ng gf fe ea at tu ur re es s: :
•
•F Fa as st te er rC Cl le ea an ni in ng g
-Wider Vacuum Nozzle
-Powerful Sweep Hose
•
•L La ar rg ge eD De eb br ri is sP Pi ic ck k- -u up p
-Large Suction Inlet
-Three High Pressure Water Jets
•
•L Le es ss sF Fr re eq qu ue en nt tB Ba ag gC Cl le ea an ni in ng g
-Large Capacity Bag
-Easy to remove, clean and replace debris bag
•
•C Co om mp pl le et te eP Po oo ol lC Co ov ve er ra ag ge e
-Patented AquaDrive™ water jet propulsion
-Randomized Cleaning & Spin-out
-Sweeps debris off steps while skimming
•
•C Cl le ea an ns st th he eP Po oo ol lB Bo ot tt to om m, ,S Si id de es sa an nd dS Sk ki im ms s
t
th he eW Wa at te er r’ ’s sS Su ur rf fa ac ce e
-Automatic Ascent and Descent
-Switch for Bottom & Side Cleaning Only or Surface
Skimming Only
•
•L Le es ss sW We ea ar ro on nP Po oo ol lS Su ur rf fa ac ce e
-Patented AquaDrive water jet propulsion: no powered
wheels wearing pool surfaces
•
•E Ea as sy yI In ns st ta al ll la at ti io on n
A limited warranty program protects your Hayward Phantom
Turbo cleaner.To take full advantage of this limited warranty,
please read, complete and r
re et tu ur rn nt th he eL Li im mi it te ed dW Wa ar rr ra an nt ty y
R
Re eg gi is st tr ra at ti io on nC Ca ar rd dw wi it th hi in n1 14 4d da ay ys so of fp pu ur rc ch ha as se ed da at te eo or rg go o
t
to ow ww ww w. .h ha ay yw wa ar rd dn ne et t. .c co om m/ /w wa ar rr ra an nt ty yt to oc co om mp pl le et te eo on nl li in ne e. .
Your warranty card is included in this Owner’s Guide.
I
Im mp po or rt ta an nt t
This Owner’s Guide is for Phantom Turbo owners who want to
install their Automatic Pool Cleaner. However, we recommend
that an Authorized Hayward Dealer install the cleaner.
The Hayward 6060 Booster Pump purchased separately or as
part of the Phantom Turbo Automatic Pool Cleaner package offers
optimum cleaner performance. Use of other booster pumps will
provide acceptable performance if they deliver at least 35 Pounds
per Square Inch (PSI) at 12 Gallons Per Minute (GPM) at the
dedicated line pool wall fitting. For electrical and plumbing
installation procedures for the Hayward Booster Pump, refer to the
Owner’s Guide that comes with the Hayward 6060 Booster Pump.
P
Pu ur rc ch ha as se eD Da at te e
S
Se er ri ia al lN Nu um mb be er r
(located on back of cleaner)
N
Nu um mb be er ro of fR Ri ig gi id dP Pi ip pe eA As ss se em mb bl li ie es sU Us se ed d
P
Pr re es ss su ur re eG Ga au ug ge eR Re ea ad di in ng g
FFoorrYYoouurrRReeccoorrddss

Use Only Genuine Hayward Replacement Parts.
C
Co on nt te en nt ts sI
In nt tr ro od du uc ct ti io on n
3
Use Only Genuine Hayward Replacement Parts.
2
I
Im mp po or rt ta an nt tS Sa af fe et ty yI In ns st tr ru uc ct ti io on ns s. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 1
D
Di is sc cl la ai im me er r. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 1
I
In nt tr ro od du uc ct ti io on n. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .3 3
F
Fo or rY Yo ou ur rR Re ec co or rd ds s. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .3 3
P
Pr ri in nc ci ip pl le eP Pa ar rt ts s. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .4 4
P
Pr re ep pa ar ri in ng gt th he eP Po oo ol l. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .5 5
Dedicated Return Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Tools Needed for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
C
Co on nn ne ec ct ti in ng gP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er rt to oP Po oo ol l. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .6 6
Installing the Universal Wall Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
A
As ss se em mb bl li in ng ga an nd dS Si iz zi in ng gt th he eR Ri ig gi id dP Pr re es ss su ur re eH Ho os se e. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .7 7
C
Co on nn ne ec ct ti in ng gt th he eR Ri ig gi id dP Pr re es ss su ur re eH Ho os se e. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .8 8
Disconnecting a Hose Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting Hose to Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
O
Op pe er ra at ti in ng gt th he eP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er r. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .9 9
Setting Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
L
La ar rg ge eC Ca ap pa ac ci it ty yD De eb br ri is sB Ba ag g. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 10 0
Attaching Debris Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Removing Debris Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Emptying Debris Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Sand (Dense Debris) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
C
Co or rr re ec ct tl ly yO Op pe er ra at ti in ng gP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er r. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 11 1
Movement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Spin-Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Sweep Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Fine Debris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Sand (Dense Debris) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Pressure Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
P
Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er rA Ad dj ju us st tm me en nt ts s. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 12 2
Changing Spin-Out Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Changing Spin-Out Cam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Adjusting Spin-Out Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Changing Top and Bottom Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Adjusting Sweep Hose Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
M
Ma ai in nt te en na an nc ce e. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 14 4
Removing Phantom Turbo Cleaner from Pool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Emptying Debris Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Cleaning the In-Line Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Sweep Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
S
St to or ri in ng gt th he eP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er r. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 15 5
Winterizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Periodic Freezing Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
T
Tr ro ou ub bl le es sh ho oo ot ti in ng g. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 16 6
B
Bo oo os st te er rP Pu um mp p. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 17 7
P
Ph ha an nt to om mT Tu ur rb bo oP Pa ar rt ts sD Di ia ag gr ra am ma an nd dR Re ep pl la ac ce em me en nt tP Pa ar rt ts sL Li is st t. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 18 8
L
Li im mi it te ed dW Wa ar rr ra an nt ty y. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .1 19 9
Congratulations on your purchase of the Hayward Phantom Turbo
Automatic Pool Cleaner. The Hayward Phantom Turbo is the only
Total Pool Cleaner. The Phantom Turbo is designed to not only to
clean your pool’s bottom and sides, but also to skim the water’s
surface as well – all automatically!
T
Th hi is sr re ev vo ol lu ut ti io on na ar ry yd de es si ig gn no of ff fe er rs st th he ef fo ol ll lo ow wi in ng gf fe ea at tu ur re es s: :
•
•F Fa as st te er rC Cl le ea an ni in ng g
-Wider Vacuum Nozzle
-Powerful Sweep Hose
•
•L La ar rg ge eD De eb br ri is sP Pi ic ck k- -u up p
-Large Suction Inlet
-Three High Pressure Water Jets
•
•L Le es ss sF Fr re eq qu ue en nt tB Ba ag gC Cl le ea an ni in ng g
-Large Capacity Bag
-Easy to remove, clean and replace debris bag
•
•C Co om mp pl le et te eP Po oo ol lC Co ov ve er ra ag ge e
-Patented AquaDrive™ water jet propulsion
-Randomized Cleaning & Spin-out
-Sweeps debris off steps while skimming
•
•C Cl le ea an ns st th he eP Po oo ol lB Bo ot tt to om m, ,S Si id de es sa an nd dS Sk ki im ms s
t
th he eW Wa at te er r’ ’s sS Su ur rf fa ac ce e
-Automatic Ascent and Descent
-Switch for Bottom & Side Cleaning Only or Surface
Skimming Only
•
•L Le es ss sW We ea ar ro on nP Po oo ol lS Su ur rf fa ac ce e
-Patented AquaDrive water jet propulsion: no powered
wheels wearing pool surfaces
•
•E Ea as sy yI In ns st ta al ll la at ti io on n
A limited warranty program protects your Hayward Phantom
Turbo cleaner.To take full advantage of this limited warranty,
please read, complete and r
re et tu ur rn nt th he eL Li im mi it te ed dW Wa ar rr ra an nt ty y
R
Re eg gi is st tr ra at ti io on nC Ca ar rd dw wi it th hi in n1 14 4d da ay ys so of fp pu ur rc ch ha as se ed da at te eo or rg go o
t
to ow ww ww w. .h ha ay yw wa ar rd dn ne et t. .c co om m/ /w wa ar rr ra an nt ty yt to oc co om mp pl le et te eo on nl li in ne e. .
Your warranty card is included in this Owner’s Guide.
I
Im mp po or rt ta an nt t
This Owner’s Guide is for Phantom Turbo owners who want to
install their Automatic Pool Cleaner. However, we recommend
that an Authorized Hayward Dealer install the cleaner.
The Hayward 6060 Booster Pump purchased separately or as
part of the Phantom Turbo Automatic Pool Cleaner package offers
optimum cleaner performance. Use of other booster pumps will
provide acceptable performance if they deliver at least 35 Pounds
per Square Inch (PSI) at 12 Gallons Per Minute (GPM) at the
dedicated line pool wall fitting. For electrical and plumbing
installation procedures for the Hayward Booster Pump, refer to the
Owner’s Guide that comes with the Hayward 6060 Booster Pump.
P
Pu ur rc ch ha as se eD Da at te e
S
Se er ri ia al lN Nu um mb be er r
(located on back of cleaner)
N
Nu um mb be er ro of fR Ri ig gi id dP Pi ip pe eA As ss se em mb bl li ie es sU Us se ed d
P
Pr re es ss su ur re eG Ga au ug ge eR Re ea ad di in ng g
FFoorrYYoouurrRReeccoorrddss

P
Pr ri in nc ci ip pl le eP Pa ar rt ts sP
Pr re ep pa ar ri in ng gt th he eP Po oo ol l
4 5
Use Only Genuine Hayward Replacement Parts.
C
Ca au ut ti io on n- -R Ri is sk ko of fE Eq qu ui ip pm me en nt tD Da am ma ag ge e
Hose may be stored folded pipe-to-pipe. Only first 3-foot hose section
and sweep hose must be stored straight, n
no ot tc co oi il le ed d. .
A. Wing
B. Large Capacity Debris Bag with Float Closure
C. Cleaner Connector
D. Sweep Hose Connector
E. Sweep Hose Adjustment Knob
F. Cam Cap
G. Rigid Pressure Hose
H. Hose Float
I. Hose Pipe Coupling
J. Hose Swivel - (See special installation instructions in this manual)
K. Adjustable Wall Quick Connect
L. Sweep Hose
M. Wear Roller
N. Rigid Hose Pipe
O. Universal Wall Fitting
P. Top / Auto / Bottom Switch
Q. In-Line Filter
R. Hose Swivel Assembly
S. Hose Cleaner End Assembly
T. Hose Wall End Assembly
U. Setup Pressure Gauge
T
Th he eP Ph ha an nt to om mT Tu ur rb bo oc cl le ea an ne er rs sh ho ou ul ld dn no ot tb be eu us se ed dt to oc cl le ea an n
t
th he ep po oo ol lf fo or rs sp pr ri in ng gs st ta ar rt t- -u up pu un nt ti il lt th he ef fo ol ll lo ow wi in ng gs st te ep ps s
h
ha av ve eb be ee en nt ta ak ke en n: :
1
1. .Clear the pool of any objects that might interfere with the
cleaner’s operation.
2
2. .Check to see that the water is at the recommended level.
3
3. .Check the water chemistry. The water should be properly
balanced (ph level) and the pool free from algae.
N
No ot te e: :Algae can adversely affect the operation and
performance of the cleaner.
4
4. .Clean or backwash the filtration system without the
Phantom cleaner in the pool.
C
Ca au ut ti io on n- -R Ri is sk ko of fE Eq qu ui ip pm me en nt tD Da am ma ag ge e. .
Always disconnect the Phantom Turbo Cleaner and hoses from
the Universal Wall Fitting and remove from pool before
backwashing or cleaning the filtration system. Failure to do so
can damage the Booster Pump and Cleaner.
5
5. .Clean the filtration system pump’s strainer basket
N
No ot te e: :After installing the Phantom Turbo cleaner, clean the
filtration system at regular intervals according to individual
pool conditions.
N
Ne ew wP Po oo ol lC Co on ns st tr ru uc ct ti io on n
1
1. .Brush newly constructed pool surface and manually
vacuum new surface debris before installing the
Phantom.
S
Sa an nd d( (d de en ns se ed de eb br ri is s) )
A
Al lw wa ay ys se em mp pt ty yt th he eP Ph ha an nt to om mb ba ag gw wh he en ns sa an nd d
(
(o or rh he ea av vy yd de eb br ri is s) )e ef ff fe ec ct ts st th he ec cl le ea an ne er r’ ’s ss st ta ab bi il li it ty y
Pools with excessive amounts of sand should be manually
vacuumed before installing the Phantom.
D
De ed di ic ca at te ed dB Bo oo os st te er rP Pu um mp pR Re et tu ur rn nL Li in ne e
The cleaner is designed to connect to a 1-1/2 inch dedicated
return line that is at least 6 inches below the normal water level
with 1-1/2 inch female threads. If the dedicated return line has
3/4 inch female threads, you will need to purchase a 1-1/2 inch
NPTF x 3/4 inch NPTM adapter.
T
To oo ol ls sN Ne ee ed de ed df fo or rI In ns st ta al ll la at ti io on n
• Flat blade screwdriver for adjusting the Regulator on the
Wall Quick Connect.
•Rigid Pressure Hose Measuring Tape
(included in Bag #1).
W
Wa al ll lQ Qu ui ic ck kC Co on nn ne ec ct t
R
Re ea ar rv vi ie ew wP Pr ro od du uc ct t
F
Fr ro on nt tv vi ie ew wP Pr ro od du uc ct t
C
L
D
E
M
G
O
K
B
F
A
P
R
Ri ig gi id dP Pr re es ss su ur re eH Ho os se eP Pa ar rt ts s( (G G) )
I
H
U
J
N
R
TK
Q
C
LM
S

P
Pr ri in nc ci ip pl le eP Pa ar rt ts sP
Pr re ep pa ar ri in ng gt th he eP Po oo ol l
4 5
Use Only Genuine Hayward Replacement Parts.
C
Ca au ut ti io on n- -R Ri is sk ko of fE Eq qu ui ip pm me en nt tD Da am ma ag ge e
Hose may be stored folded pipe-to-pipe. Only first 3-foot hose section
and sweep hose must be stored straight, n
no ot tc co oi il le ed d. .
A. Wing
B. Large Capacity Debris Bag with Float Closure
C. Cleaner Connector
D. Sweep Hose Connector
E. Sweep Hose Adjustment Knob
F. Cam Cap
G. Rigid Pressure Hose
H. Hose Float
I. Hose Pipe Coupling
J. Hose Swivel - (See special installation instructions in this manual)
K. Adjustable Wall Quick Connect
L. Sweep Hose
M. Wear Roller
N. Rigid Hose Pipe
O. Universal Wall Fitting
P. Top / Auto / Bottom Switch
Q. In-Line Filter
R. Hose Swivel Assembly
S. Hose Cleaner End Assembly
T. Hose Wall End Assembly
U. Setup Pressure Gauge
T
Th he eP Ph ha an nt to om mT Tu ur rb bo oc cl le ea an ne er rs sh ho ou ul ld dn no ot tb be eu us se ed dt to oc cl le ea an n
t
th he ep po oo ol lf fo or rs sp pr ri in ng gs st ta ar rt t- -u up pu un nt ti il lt th he ef fo ol ll lo ow wi in ng gs st te ep ps s
h
ha av ve eb be ee en nt ta ak ke en n: :
1
1. .Clear the pool of any objects that might interfere with the
cleaner’s operation.
2
2. .Check to see that the water is at the recommended level.
3
3. .Check the water chemistry. The water should be properly
balanced (ph level) and the pool free from algae.
N
No ot te e: :Algae can adversely affect the operation and
performance of the cleaner.
4
4. .Clean or backwash the filtration system without the
Phantom cleaner in the pool.
C
Ca au ut ti io on n- -R Ri is sk ko of fE Eq qu ui ip pm me en nt tD Da am ma ag ge e. .
Always disconnect the Phantom Turbo Cleaner and hoses from
the Universal Wall Fitting and remove from pool before
backwashing or cleaning the filtration system. Failure to do so
can damage the Booster Pump and Cleaner.
5
5. .Clean the filtration system pump’s strainer basket
N
No ot te e: :After installing the Phantom Turbo cleaner, clean the
filtration system at regular intervals according to individual
pool conditions.
N
Ne ew wP Po oo ol lC Co on ns st tr ru uc ct ti io on n
1
1. .Brush newly constructed pool surface and manually
vacuum new surface debris before installing the
Phantom.
S
Sa an nd d( (d de en ns se ed de eb br ri is s) )
A
Al lw wa ay ys se em mp pt ty yt th he eP Ph ha an nt to om mb ba ag gw wh he en ns sa an nd d
(
(o or rh he ea av vy yd de eb br ri is s) )e ef ff fe ec ct ts st th he ec cl le ea an ne er r’ ’s ss st ta ab bi il li it ty y
Pools with excessive amounts of sand should be manually
vacuumed before installing the Phantom.
D
De ed di ic ca at te ed dB Bo oo os st te er rP Pu um mp pR Re et tu ur rn nL Li in ne e
The cleaner is designed to connect to a 1-1/2 inch dedicated
return line that is at least 6 inches below the normal water level
with 1-1/2 inch female threads. If the dedicated return line has
3/4 inch female threads, you will need to purchase a 1-1/2 inch
NPTF x 3/4 inch NPTM adapter.
T
To oo ol ls sN Ne ee ed de ed df fo or rI In ns st ta al ll la at ti io on n
• Flat blade screwdriver for adjusting the Regulator on the
Wall Quick Connect.
•Rigid Pressure Hose Measuring Tape
(included in Bag #1).
W
Wa al ll lQ Qu ui ic ck kC Co on nn ne ec ct t
R
Re ea ar rv vi ie ew wP Pr ro od du uc ct t
F
Fr ro on nt tv vi ie ew wP Pr ro od du uc ct t
C
L
D
E
M
G
O
K
B
F
A
P
R
Ri ig gi id dP Pr re es ss su ur re eH Ho os se eP Pa ar rt ts s( (G G) )
I
H
U
J
N
R
TK
Q
C
LM
S

7
Use Only Genuine Hayward Replacement Parts.Use Only Genuine Hayward Replacement Parts.
C
Co on nn ne ec ct ti in ng gt th he eP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er rT To oP Po oo ol l
6
I
In ns st ta al ll li in ng gU Un ni iv ve er rs sa al lW Wa al ll lF Fi it tt ti in ng g
B
Bu ui il ld de er rs s: :Install the Dedicated Return Line at the
midpoint of the pool’s long wall.
S
Sp pe ec ci if fi ic ca at ti io on n: Dedicated Return Line in Pool Wall.
D
De ep pt th h: :At least 6 inches below water level.
S
Si iz ze e: :1-1/2 inch NPT Female Threaded.
1
1. .Flush plumbing lines before proceeding.
2
2. .Turn Booster Pump and Main Filtration Pump O OF FF F.
3
3. .Remove plug or existing Universal Wall Fitting from
previously installed pool cleaner (if any).
4
4. .Remove the Universal Wall Fitting (part O) and Teflon®tape
from Bag #1.
5
5. .When installing or re-installing the Universal Wall Fitting
use Teflon®tape on its plastic threads. Leave two starting
threads on the end of the Universal Wall Fitting un-taped.
6
6. .Screw the Universal Wall Fitting into the Dedicated
Return Line.
I
Im mp po or rt ta an nt t: :Turn the Universal Wall Fitting 1 full turn to the
right to engage starting threads. Be sure both parts are
started properly (not cross threaded) then resume tightening
– hand tighten only. T
Th he eU Un ni iv ve er rs sa al lW Wa al ll lF Fi it tt ti in ng gm ma ay yn no ot t
s
sc cr re ew wa al ll lt th he ew wa ay yi in nt to ot th he eD De ed di ic ca at te ed dR Re et tu ur rn nL Li in ne e. .
D
Do on no ot to ov ve er rt ti ig gh ht te en n. .
Teflon®is a registered trademark of E.I. du Pont de Nemours
and Company.
A
As ss se em mb bl li in ng ga an nd dS Si iz zi in ng gt th he eR Ri ig gi id dP Pr re es ss su ur re eH Ho os se e
A
As ss se em mb bl li in ng ga an nd dS Si iz zi in ng gt th he eR Ri ig gi id dP Pr re es ss su ur re eH Ho os se e
1
1. .Open the plastic bag labeled #1 that contains 10 Rigid Hose
Pipes (Part N) and 5 Hose Pipe Couplings (Part I).
2
2. .Lubricate the 5 Hose Pipe Couplings by dunking them in
soapy water.
3
3. .Align the Barbs on the Hose Pipe Coupling with the Tabs on
the Rigid Hose Pipes and snap together. Be sure the black
o-ring does not slip out of the groove on the Hose Pipe
Coupling (if the o-ring is visible through the latch opening
when pipes are snapped together the o-ring has slipped out
of the groove and will leak)
4
4. .Make 5 S Se et ts sof P Pi ip pe eA As ss se em mb bl li ie es sby connecting 1 Rigid
Hose Pipe onto each end of the Hose Pipe Couplings.
5
5. .Locate the “Measuring Tape” (packed in Bag #1), secure the
end of the tape marked “Wall Connector End” on the pool
coping immediately above the Universal Wall Fitting.
6
6. .Unroll the Measuring Tape, walk around the pool to the
farthest point along the pool wall from the Universal Wall
Fitting.
At the farthest point from the Universal Wall Fitting hold
the Measuring Tape at the pool edge/coping and read the
number of Pipe Assemblies specified on the tape.
U
Un ni iv ve er rs sa al lW Wa al ll lF Fi it tt ti in ng g
R
Ri ig gi id dH Ho os se eP Pi ip pe eA As ss se em mb bl ly y
Dedicated Return Line
Universal Wall Fitting (O)
M
Me ea as su ur ri in ng gT Ta ap pe e
C
Co on nn ne ec ct ti in ng gH Ho os se eP Pi ip pe es s
I
N
a. N
No ot te e: :If the measuring tape specifies more than 5 Pipe
Assemblies, you need to purchase the additional Pipe
sections (P/N AX6000HE) from your Authorized Hayward
Dealer.
b. If the measuring tape specifies fewer than 5 Pipe
Assemblies, set the remaining Pipe Assemblies aside these
will not be needed.
R
Re ec ct ta an ng gu ul la ar r- -S Sh ha ap pe ed dP Po oo ol l
K
Ki id dn ne ey y- -S Sh ha ap pe ed dP Po oo ol l
A
An ng gl le e- -S Sh ha ap pe ed dP Po oo ol l
Universal Wall Fitting
(Dedicated Line)
Universal Wall Fitting
(Dedicated Line)
Farthest Point
Farthest Point
Universal Wall Fitting
(Dedicated Line)
Farthest Point
I N
1 Pipe
Assembly

7
Use Only Genuine Hayward Replacement Parts.Use Only Genuine Hayward Replacement Parts.
C
Co on nn ne ec ct ti in ng gt th he eP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er rT To oP Po oo ol l
6
I
In ns st ta al ll li in ng gU Un ni iv ve er rs sa al lW Wa al ll lF Fi it tt ti in ng g
B
Bu ui il ld de er rs s: :Install the Dedicated Return Line at the
midpoint of the pool’s long wall.
S
Sp pe ec ci if fi ic ca at ti io on n: Dedicated Return Line in Pool Wall.
D
De ep pt th h: :At least 6 inches below water level.
S
Si iz ze e: :1-1/2 inch NPT Female Threaded.
1
1. .Flush plumbing lines before proceeding.
2
2. .Turn Booster Pump and Main Filtration Pump O OF FF F.
3
3. .Remove plug or existing Universal Wall Fitting from
previously installed pool cleaner (if any).
4
4. .Remove the Universal Wall Fitting (part O) and Teflon®tape
from Bag #1.
5
5. .When installing or re-installing the Universal Wall Fitting
use Teflon®tape on its plastic threads. Leave two starting
threads on the end of the Universal Wall Fitting un-taped.
6
6. .Screw the Universal Wall Fitting into the Dedicated
Return Line.
I
Im mp po or rt ta an nt t: :Turn the Universal Wall Fitting 1 full turn to the
right to engage starting threads. Be sure both parts are
started properly (not cross threaded) then resume tightening
– hand tighten only. T
Th he eU Un ni iv ve er rs sa al lW Wa al ll lF Fi it tt ti in ng gm ma ay yn no ot t
s
sc cr re ew wa al ll lt th he ew wa ay yi in nt to ot th he eD De ed di ic ca at te ed dR Re et tu ur rn nL Li in ne e. .
D
Do on no ot to ov ve er rt ti ig gh ht te en n. .
Teflon®is a registered trademark of E.I. du Pont de Nemours
and Company.
A
As ss se em mb bl li in ng ga an nd dS Si iz zi in ng gt th he eR Ri ig gi id dP Pr re es ss su ur re eH Ho os se e
A
As ss se em mb bl li in ng ga an nd dS Si iz zi in ng gt th he eR Ri ig gi id dP Pr re es ss su ur re eH Ho os se e
1
1. .Open the plastic bag labeled #1 that contains 10 Rigid Hose
Pipes (Part N) and 5 Hose Pipe Couplings (Part I).
2
2. .Lubricate the 5 Hose Pipe Couplings by dunking them in
soapy water.
3
3. .Align the Barbs on the Hose Pipe Coupling with the Tabs on
the Rigid Hose Pipes and snap together. Be sure the black
o-ring does not slip out of the groove on the Hose Pipe
Coupling (if the o-ring is visible through the latch opening
when pipes are snapped together the o-ring has slipped out
of the groove and will leak)
4
4. .Make 5 S Se et ts sof P Pi ip pe eA As ss se em mb bl li ie es sby connecting 1 Rigid
Hose Pipe onto each end of the Hose Pipe Couplings.
5
5. .Locate the “Measuring Tape” (packed in Bag #1), secure the
end of the tape marked “Wall Connector End” on the pool
coping immediately above the Universal Wall Fitting.
6
6. .Unroll the Measuring Tape, walk around the pool to the
farthest point along the pool wall from the Universal Wall
Fitting.
At the farthest point from the Universal Wall Fitting hold
the Measuring Tape at the pool edge/coping and read the
number of Pipe Assemblies specified on the tape.
U
Un ni iv ve er rs sa al lW Wa al ll lF Fi it tt ti in ng g
R
Ri ig gi id dH Ho os se eP Pi ip pe eA As ss se em mb bl ly y
Dedicated Return Line
Universal Wall Fitting (O)
M
Me ea as su ur ri in ng gT Ta ap pe e
C
Co on nn ne ec ct ti in ng gH Ho os se eP Pi ip pe es s
I
N
a. N
No ot te e: :If the measuring tape specifies more than 5 Pipe
Assemblies, you need to purchase the additional Pipe
sections (P/N AX6000HE) from your Authorized Hayward
Dealer.
b. If the measuring tape specifies fewer than 5 Pipe
Assemblies, set the remaining Pipe Assemblies aside these
will not be needed.
R
Re ec ct ta an ng gu ul la ar r- -S Sh ha ap pe ed dP Po oo ol l
K
Ki id dn ne ey y- -S Sh ha ap pe ed dP Po oo ol l
A
An ng gl le e- -S Sh ha ap pe ed dP Po oo ol l
Universal Wall Fitting
(Dedicated Line)
Universal Wall Fitting
(Dedicated Line)
Farthest Point
Farthest Point
Universal Wall Fitting
(Dedicated Line)
Farthest Point
I N
1 Pipe
Assembly

9
Use Only Genuine Hayward Replacement Parts.
W
Wa ar rn ni in ng g- -R Ri is sk ko of fI In nj ju ur ry y
The Filtration and Booster Pumps must be O
OF FF Fwhen connecting
or disconnecting cleaner hose.
C
Ca au ut ti io on n- -R Ri is sk ko of fE Eq qu ui ip pm me en nt tD Da am ma ag ge e
The filter pump must always be run to clear air from the system
before turning the Booster Pump O
ON N. .N Ne ev ve er rr ru un nthe Booster
Pump without the main filter pump O
ON N. Running the Booster
Pump dry will damage the Booster Pump and void the warranty.
O
Op pe er ra at ti in ng gt th he eP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er r
1
1. .Be sure all filtration system valves are open and supplying
water to the Booster Pump.
2
2. .Be sure valves to and from the Booster Pump and dedicated
return line are fully opened.
3
3. .The Phantom Turbo Cleaner and its Booster Pump can only
operate when the pool’s filter pump is operating.
C
Ca au ut ti io on n- -R Ri is sk ko of fE Eq qu ui ip pm me en nt tD Da am ma ag ge e
Failure to open valves fully and/or failure to have the filtration
system operating will damage the Booster Pump. This damage
voids the Booster Pump’s warranty.
S
Se et tt ti in ng gP Pr re es ss su ur re e
I
Im mp po or rt ta an nt t: :The cleaner will not operate properly if the pressure
is not properly set. Too little pressure will prevent proper
movement and cleaning. Too much pressure will cause poor
cleaning and premature wear of Cleaner parts.
W
Wa ar rn ni in ng g- -R Ri is sk ko of fI In nj ju ur ry y
Be careful to hold the Cleaner Connector (Part C) with the Setup
Pressure Gauge (Part U) attached under water and not to be
sprayed by the hole in the Setup Pressure Gauge or by the
Sweep Hose. N
Ne ev ve er rpoint a jet or hose at people or pets.
Clip the Setup Pressure Gauge to the hose near the Wall Quick
Connect.
1
1. .Turn the filtration system pump O ON Nthen the Booster Pump
O
ON N. Read the pressure on the Setup Pressure Gauge
connected to the Cleaner Connector.Use a flat blade
screwdriver to adjust the Wall Quick Connect Knob
(see figure 2) until the pressure reads 25 PSI (+/- 5 PSI).
N
No ot te e: :The Wall Quick Connect can be adjusted from “0”
(fully closed) to “5” (fully open). Do N
NO OT Tforce the
adjustment knob beyond “0” or “5”.
2
2. .If the Wall Connector is on Position “5” (fully open) and the
pressure is still below 20 PSI, check for clogged Filter, Pump
Strainer Basket, Main Drain, Skimmer Basket, etc., to
determine why there is insufficient water pressure at the
dedicated line. If more pressure is still required have an
Authorized Hayward Pool Dealer or Service person check
the Booster Pump, Filtration System and Plumbing to
determine if they are functioning correctly.
3
3. .Turn the Booster Pump and Filtration Pump O OF FF F.
4
4. .R Re em mo ov ve et th he eS Se et tu up pP Pr re es ss su ur re eG Ga au ug ge efrom the Cleaner
Connector. Store the Setup Pressure Gauge with the
Owner’s Guide in a safe place.
5
5. .Attach the Cleaner Connector to Cleaner. The Sweep Hose
should be directly below the Pressure Hose.
6
6. .Place the cleaner in the pool, turn the Filtration system O ON N,
then turn the Booster Pump O
ON N.
C
Co on nn ne ec ct ti in ng gP Pr re es ss su ur re eH Ho os se et to oC Cl le ea an ne er r
A
Ad dj ju us st ti in ng gP Pr re es ss su ur re ea at tW Wa al ll lC Co on nn ne ec ct to or r
S
Se et tu up pP Pr re es ss su ur re eG Ga au ug ge e& &W Wa al ll lC Co on nn ne ec ct t
K
C
U
C
7
7. .Lubricate the swivel on the 3 ft. Hose Wall End Assembly (Part T)
in soapy water then snap into one of the Pipe Assemblies.
8
8. .Lubricate the swivel on the Hose Cleaner End Assembly (Part S)
in soapy water then snap into a different Pipe Assembly.
9
9. .Open Bag #2 and lubricate both ends of the Hose Swivel
Assemblies (Part R) in soapy water. Connect the Pipe
Assemblies by snapping the Hose Swivel Assemblies into each
of the Pipe Assemblies.
C
Co on nn ne ec ct ti in ng gH Ho os se et to oW Wa al ll lF Fi it tt ti in ng g
1
1. .With the Booster Pump and Filtration system turned O OF FF F,
look down from the pool deck and hold the Wall Quick
Connect so the hose is to the left and the adjustment knob
is to the right. Insert the Wall Quick Connect into the
Universal Wall Fitting and turn it to the left (counter
clockwise) to lock. The hose should be on the bottom below
the adjustment knob.
2
2. .Pull the Wall Quick Connect outward to check that the Wall
Quick Connect is locked into the Universal Wall Fitting.
3
3. .To d di is sc co on nn ne ec ct tthe hose, first turn the Booster Pump and
Filtration pump O
OF FF Fthen push the Wall Quick Connect
toward the wall, turn it to the right (clockwise) and pull the
Wall Quick Connect out of the Universal Wall Fitting.
D
Di is sc co on nn ne ec ct ti in ng ga aH Ho os se eP Pi ip pe e
If it is necessary to shorten, lengthen or replace a component
of the Rigid Pressure Hose, the Snap Fits can be undone with
two small screwdrivers.
8
Use Only Genuine Hayward Replacement Parts.
W
Wa al ll lQ Qu ui ic ck kC Co on nn ne ec ct t
C
Co on nn ne ec ct ti in ng gT Th he eR Ri ig gi id dP Pr re es ss su ur re eH Ho os se et to oP Po oo ol lO Op pe er ra at ti in ng gt th he eP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er r
W
Wa al ll lC Co on nn ne ec ct to or rA As ss se em mb bl ly y
H
Ho os se eC Cl le ea an ne er rE En nd dA As ss se em mb bl ly y
T QN
H
Ho os se eS Sw wi iv ve el lA As ss se em mb bl ly y
RN
R
Ri ig gi id dP Pr re es ss su ur re eH Ho os se eA As ss se em mb bl ly y
S
Figure 1
Figure 2
Figure 3
I
It ti is se es ss se en nt ti ia al lt th ha at tt th he eH Ho os se eS Sw wi iv ve el lA As ss se em mb bl li ie es sa ar re e
i
in ns st ta al ll le ed dc co or rr re ec ct tl ly yt to oe en ns su ur re et ta an ng gl le ef fr re ee eo op pe er ra at ti io on no of ft th he e
P
Ph ha an nt to om mT Tu ur rb bo o. .

9
Use Only Genuine Hayward Replacement Parts.
W
Wa ar rn ni in ng g- -R Ri is sk ko of fI In nj ju ur ry y
The Filtration and Booster Pumps must be O
OF FF Fwhen connecting
or disconnecting cleaner hose.
C
Ca au ut ti io on n- -R Ri is sk ko of fE Eq qu ui ip pm me en nt tD Da am ma ag ge e
The filter pump must always be run to clear air from the system
before turning the Booster Pump O
ON N. .N Ne ev ve er rr ru un nthe Booster
Pump without the main filter pump O
ON N. Running the Booster
Pump dry will damage the Booster Pump and void the warranty.
O
Op pe er ra at ti in ng gt th he eP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er r
1
1. .Be sure all filtration system valves are open and supplying
water to the Booster Pump.
2
2. .Be sure valves to and from the Booster Pump and dedicated
return line are fully opened.
3
3. .The Phantom Turbo Cleaner and its Booster Pump can only
operate when the pool’s filter pump is operating.
C
Ca au ut ti io on n- -R Ri is sk ko of fE Eq qu ui ip pm me en nt tD Da am ma ag ge e
Failure to open valves fully and/or failure to have the filtration
system operating will damage the Booster Pump. This damage
voids the Booster Pump’s warranty.
S
Se et tt ti in ng gP Pr re es ss su ur re e
I
Im mp po or rt ta an nt t: :The cleaner will not operate properly if the pressure
is not properly set. Too little pressure will prevent proper
movement and cleaning. Too much pressure will cause poor
cleaning and premature wear of Cleaner parts.
W
Wa ar rn ni in ng g- -R Ri is sk ko of fI In nj ju ur ry y
Be careful to hold the Cleaner Connector (Part C) with the Setup
Pressure Gauge (Part U) attached under water and not to be
sprayed by the hole in the Setup Pressure Gauge or by the
Sweep Hose. N
Ne ev ve er rpoint a jet or hose at people or pets.
Clip the Setup Pressure Gauge to the hose near the Wall Quick
Connect.
1
1. .Turn the filtration system pump O ON Nthen the Booster Pump
O
ON N. Read the pressure on the Setup Pressure Gauge
connected to the Cleaner Connector.Use a flat blade
screwdriver to adjust the Wall Quick Connect Knob
(see figure 2) until the pressure reads 25 PSI (+/- 5 PSI).
N
No ot te e: :The Wall Quick Connect can be adjusted from “0”
(fully closed) to “5” (fully open). Do N
NO OT Tforce the
adjustment knob beyond “0” or “5”.
2
2. .If the Wall Connector is on Position “5” (fully open) and the
pressure is still below 20 PSI, check for clogged Filter, Pump
Strainer Basket, Main Drain, Skimmer Basket, etc., to
determine why there is insufficient water pressure at the
dedicated line. If more pressure is still required have an
Authorized Hayward Pool Dealer or Service person check
the Booster Pump, Filtration System and Plumbing to
determine if they are functioning correctly.
3
3. .Turn the Booster Pump and Filtration Pump O OF FF F.
4
4. .R Re em mo ov ve et th he eS Se et tu up pP Pr re es ss su ur re eG Ga au ug ge efrom the Cleaner
Connector. Store the Setup Pressure Gauge with the
Owner’s Guide in a safe place.
5
5. .Attach the Cleaner Connector to Cleaner. The Sweep Hose
should be directly below the Pressure Hose.
6
6. .Place the cleaner in the pool, turn the Filtration system O ON N,
then turn the Booster Pump O
ON N.
C
Co on nn ne ec ct ti in ng gP Pr re es ss su ur re eH Ho os se et to oC Cl le ea an ne er r
A
Ad dj ju us st ti in ng gP Pr re es ss su ur re ea at tW Wa al ll lC Co on nn ne ec ct to or r
S
Se et tu up pP Pr re es ss su ur re eG Ga au ug ge e& &W Wa al ll lC Co on nn ne ec ct t
K
C
U
C
7
7. .Lubricate the swivel on the 3 ft. Hose Wall End Assembly (Part T)
in soapy water then snap into one of the Pipe Assemblies.
8
8. .Lubricate the swivel on the Hose Cleaner End Assembly (Part S)
in soapy water then snap into a different Pipe Assembly.
9
9. .Open Bag #2 and lubricate both ends of the Hose Swivel
Assemblies (Part R) in soapy water. Connect the Pipe
Assemblies by snapping the Hose Swivel Assemblies into each
of the Pipe Assemblies.
C
Co on nn ne ec ct ti in ng gH Ho os se et to oW Wa al ll lF Fi it tt ti in ng g
1
1. .With the Booster Pump and Filtration system turned O OF FF F,
look down from the pool deck and hold the Wall Quick
Connect so the hose is to the left and the adjustment knob
is to the right. Insert the Wall Quick Connect into the
Universal Wall Fitting and turn it to the left (counter
clockwise) to lock. The hose should be on the bottom below
the adjustment knob.
2
2. .Pull the Wall Quick Connect outward to check that the Wall
Quick Connect is locked into the Universal Wall Fitting.
3
3. .To d di is sc co on nn ne ec ct tthe hose, first turn the Booster Pump and
Filtration pump O
OF FF Fthen push the Wall Quick Connect
toward the wall, turn it to the right (clockwise) and pull the
Wall Quick Connect out of the Universal Wall Fitting.
D
Di is sc co on nn ne ec ct ti in ng ga aH Ho os se eP Pi ip pe e
If it is necessary to shorten, lengthen or replace a component
of the Rigid Pressure Hose, the Snap Fits can be undone with
two small screwdrivers.
8
Use Only Genuine Hayward Replacement Parts.
W
Wa al ll lQ Qu ui ic ck kC Co on nn ne ec ct t
C
Co on nn ne ec ct ti in ng gT Th he eR Ri ig gi id dP Pr re es ss su ur re eH Ho os se et to oP Po oo ol lO Op pe er ra at ti in ng gt th he eP Ph ha an nt to om mT Tu ur rb bo oC Cl le ea an ne er r
W
Wa al ll lC Co on nn ne ec ct to or rA As ss se em mb bl ly y
H
Ho os se eC Cl le ea an ne er rE En nd dA As ss se em mb bl ly y
T QN
H
Ho os se eS Sw wi iv ve el lA As ss se em mb bl ly y
RN
R
Ri ig gi id dP Pr re es ss su ur re eH Ho os se eA As ss se em mb bl ly y
S
Figure 1
Figure 2
Figure 3
I
It ti is se es ss se en nt ti ia al lt th ha at tt th he eH Ho os se eS Sw wi iv ve el lA As ss se em mb bl li ie es sa ar re e
i
in ns st ta al ll le ed dc co or rr re ec ct tl ly yt to oe en ns su ur re et ta an ng gl le ef fr re ee eo op pe er ra at ti io on no of ft th he e
P
Ph ha an nt to om mT Tu ur rb bo o. .