
Warranty
Parameters
Audio system:
Power Amplier Rated output 32W+32W(8Ω/ohms,1kHz, 0.7%)
Speaker Impedance 4-32Ω
Dynamic Range >87dB
S/N Ratio >88 dB
Stereo Separation >81.5dB (1KHz)
Frequency Response 20Hz to 20KHz (±3dB)
Standard
Wireless Networking
Certifications:
Environmental Conditions:
Wired Networking:
Supports IEEE 802.11b/g/n Standard
Speed(Max) 150M
Operating Frequency 2.4G
SAR Value 95dB
Sample Rate 44.1Khz
Antenna 1T1R
Antenna gain 3dBi
Working temperature -5°C~40°C
Working relative humidity Up to 90%
Storage temperature -20°C~60°C
Storage relative humidity Up to 93%
CE, RoHS, EN60950, IEC62321
Product Information:
Power supply AC100-240V, 60/50Hz/DC
Input DC24V @ 3.3A
Dimensions
(HxWxD):144mmx112mmx31mm
(185mm with antenna on one side,
225mm with antennas on two sides)
Weight 1.3Kg
Housing material ABS, steel plate
Installation Free standing/ Wall mounting/
Distribution box mounting
Protection rating IP20
Wired Connectivity Single 10/100M RJ-45 jack
HDL warrants this product for a period of 2 years from the date of purchase. This
product will be free from defects in material & workmanship, and perform in conf-
ormity with its User Manual. Any improper use or neglect, and device damage not
caused by natural causes of force majeure will void this warranty.
109
To function correctly, the HDL HomePlay module should
be connected to a Wi- Fi router which supports IEEE
802.11b/g/n; or be connected to Ethernet 10/100Base-T.
* Important Notes
Ensure the HDL HomePlay module is well ventilated.
Safety Precautions
Do not let liquids or corrosive gases come into
HomePlay module.
IC-ID: 23984-HDLMZBOX,FCC-ID: 2AP3X-HDLMZBOX