Health O Meter HNY200 User manual

Wireless Scale HNY200
Owner’s Guide
READ AND KEEP THESE INSTRUCTIONS
343p_Nuyu_Scale_IB_MECH.indd 1 6/19/15 4:50 PM

Table of Contents
Welcome to nuyu™ ......................... 3
Insert the Batteries ......................... 4
Set-Up Instructions ......................... 4
Connect your nuyu™ Wireless Scale ......................... 4
Using your nuyu™ Wireless Scale ......................... 6
Keys and Icons ......................... 7
Troubleshooting ......................... 8
Important Information ......................... 9
Limited Warranty ......................... 11
343p_Nuyu_Scale_IB_MECH.indd 2 6/19/15 4:50 PM

3
Welcome
Congratulations, you are the proud owner of
a nuyu Wireless Scale! Reach your health goals
today with the nuyu wireless scale that uploads
weight information automatically.
The easy to use nuyu Wireless Scale uses
Bluetooth®Technology to send weight
information wirelessly to the nuyu app!
www.healthometernuyu.com
343p_Nuyu_Scale_IB_MECH.indd 3 6/19/15 4:50 PM

4
Remove battery door and remove
Pull Tab to activate the scale.
Activate the Scale
Set-Up Instructions
1
Download the nuyu™application
from the App Store.
1
Connect your nuyu™ wireless scale
343p_Nuyu_Scale_IB_MECH.indd 4 6/19/15 4:50 PM

5
Create an account
2
Connect your Wireless
Scale while keeping it close
to your phone or tablet.
3
Set Your Goals
4
343p_Nuyu_Scale_IB_MECH.indd 5 6/19/15 4:50 PM

6
Using your nuyu™ Wireless Scale
Place the scale on a at, hard surface for maximum
accuracy. Please do not use on carpet.
Open the nuyu™ app, and click on the WEIGHT screen.
Step onto the scale and position your feet so that your
weight is distributed evenly over the scale’s surface.
Stand still while reading the display
Your current weight has now been saved in your
nuyu™ app.
NOTE: To ensure your weight is saved in your app, please
make sure that your phone or tablet is the device closest
to the scale. Remove other mobile devices from the area
if they also have a nuyu™ app installed. The closest app to
the scale will receive the new weight measurement.
1
2
3
343p_Nuyu_Scale_IB_MECH.indd 6 6/19/15 4:50 PM

7
Keys and Icons
Error Messages:
Low Battery
Alarm
Overload
Weighing Error KG
Weighing Error LB
Bluetooth®
SMART error
Weight Readout
Bluetooth®SMART
connection
Unit of Measure:
Pounds (LB ) or
Kilograms (KG)
343p_Nuyu_Scale_IB_MECH.indd 7 6/19/15 4:50 PM

8
Firmware Updates
Periodically, as part of our continuous improvement policy,
there may be a rmware update for the scale. You will
be notied through the app that it is available. Select
update rmware to proceed with the update. You will see a
conrmation on the scale screen.
NOTE: The rmware update could take up to 5 minutes to
complete. When updating the rmware, please keep the
device in close proximity to the scale as the device is the
conduit to the scale for updates. The scale will display the
progress to keep you informed.
The display is in the process
of rmware upgrade.
State 1->2->3->4->5->1->2….State 1
and 5 ash alternately 2 times when
a rmware upgrade is complete
1
2
3
4
5
343p_Nuyu_Scale_IB_MECH.indd 8 6/19/15 4:50 PM

9
Troubleshooting
Bluetooth®Connection Failure:
Turn Bluetooth®OFF and then ON on your smart device to
re-establish the connection.
If the problem persists, restart your smart device.
App and Wireless Scale Connection Failure:
Try each of the following:
1. Make sure your mobile device is within range of
the scale and the WEIGHT screen is open in your nuyu™ app.
2. Try reconnecting the scale. To do this:
a. Open the nuyu™ app
b. Click on the WEIGHT screen
c. Hit the refresh button in the top right hand corner of the
screen.
3. If the scale does not respond, check the batteries in the scale
as they may need replacing.
Important Information
This scale requires 4 AA batteries. When “Lo” appears
on the display, replace the batteries.
To change unit of measure: on the back of your scale,
press the “KG/LB” button.
To clean your scale, please use a dry cloth to remove dust.
Weight exceeding the capacity (400 lb / 181 kg) may damage your
scale.
This product is designed for personal use only.
Not for commercial or industrial use.
This unit is not waterproof; avoid contact with excessive moisture.
If “E” appears on the display:
• The scale cannot detect a stable weight. Please stand still while
weighing.
• The weight has exceeded the scale’s capacity
(400 lb / 181 kg).
343p_Nuyu_Scale_IB_MECH.indd 9 6/19/15 4:50 PM

10
FCC Statement
This device complies with part 15 of the FCC Rules & Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Changes or modications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
343p_Nuyu_Scale_IB_MECH.indd 10 6/19/15 4:50 PM