Healthmark LED Magnifier 4x User manual

Instructions for Use: LED Magnifier 4x
Brand Name of Product
LED Magnifier 4x
Generic Name of Product
LED Magnifier 4x
Product Code Number(s)
MAG-002
Intended Use
A tool to help with visual inspections with three levels of brightness and a 4x magnification
for easy and thorough inspection of items.
Range of Applications for Product
Items, including robotic arms, that need up close visual inspection for possible damage or
residual soiling after processing.
Key Specifications of Product
●LED magnifier size- 85x85x60mm
●4x magnification
●Lightweight
●White 4 LED lights
●Touch activated with 3 levels of brightness
●On/Off switch
●Microfiber lens cloth
●Micro-USB Type C charging cable
●Integrated battery
Shipping & Storage
Shipping Conditions &
Requirements
Storage Conditions
Packaging Conditions
Shelf Life
Instructions for Using Product
Description of Use (s)
A close-up visual inspection of items, including robotic arms, after reprocessing.
Preparation for Use
Charge the magnifier before first use.
Connect the charging cord with the lightning connector on the side of the magnifier and
plug the USB end of the charging cord into a USB port or charger.
The dot to the left of the connector will show red while charging and turns green when it is
fully charged. The rechargeable battery has over 300 charges.
Diagrams (drawings, pictures)
Steps for Use of Product
1. Turn power switch on and use the touch activated setting (black circle) on top of
the magnifier and select the level of brightness you would like to use.
2. There are three levels of brightness:
First touch- Low- low brightness- Max 8 hours of working time
Second touch- Middle- middle brightness- Max 3 hours of working time
Third touch- High- brightest- Max 1.5 hours of working time
3. Once you have selected the LED light setting, slide an item under the magnifier to
visually inspect for cleanliness or damage through the glass of the magnifier.
Interpretation of Results
Contraindications of Test Results
Documentation
Special Warnings and Cautions
●Turn power off when not in use.
●Fire hazard. Keep magnifier away from direct sunlight to prevent accidental fire.
●Do not stare directly at LED lights as this might damage your eyes.
●Keep the magnifier away from heat sources or direct impact to prevent damage to
the battery.
●Do not manipulate the magnifier with wet hands.
●Do not use if broken, may cause injuries.
Disposal
Reprocessing Instructions
Point of Use

Preparation for Decontamination
Disassembly Instructions
Cleaning –Manual
● Clean lens with a soft clean microfiber cloth rubbing gently in a circular motion.
● Moisten the lens cloth with water if necessary.
● Do not use harsh chemicals, solvents or abrasives as they may damage the lens.
Cleaning –Automated
Disinfection
Wipe down the stand of the magnifier with pre-moistened alcohol wipe.
Drying
Maintenance, Inspection, and Testing
Reassembly Instructions
Packaging
Sterilization
Storage
Additional Information
Related Healthmark Products
Other Product Support Documents
ProSys™ Brochure, ProSys™ Price List
Reference Documents
Customer Service Contact
Healthmark Industries Company, Inc
18600 Mayln Blvd.
Fraser, MI 48026
1-586-774-7600
[e-mail]
hmark.com
2019-08-26 Suzanne Latta
Rev. B