Healthmark RNDMAG-1 User manual

Instructions for Use: Magic Touch Magnifier
Brand Name of Product
Magic Touch Magnifier
Generic Name of Product
Magnifier
Product Code Number(s)
RNDMAG-1, RNDMAGSTND-1
Purpose of Product
A must-have tool with a small size that makes it convenient to carry at all times. Designed
to allow for easy and thorough inspection of items.
Range of Applications for Product
Items that need up close visual inspection for possible damage or residual soiling after
reprocessing.
Key specifications of product
3x magnification
Lightweight .45 lbs and durable design
3 LED lights
Touch activated and on/off switch
Microfiber lens cloth
Shipping & Storage
Shipping Conditions & Requirements
Storage Conditions
Always store loupe in included protective case when not in use to avoid damaging the lens.
Packaging Contents
Shelf Life
Instructions for Using Product
Description of Use (s)
Close-up visual inspection of instruments after reprocessing
Preparation for Use
Batteries come installed. When changing batteries:
1. Turn item upside down and locate battery compartment. (Please note there are two
battery compartments.
2. The compartment closest to the light switch is the one that powers the item.
3. The other battery compartment is used to store batteries that are not in use.)
4. Pull battery door up and fold door away from the battery compartment Fig. 1.
5. Insert two fresh CR2016 coin cell batteries into battery compartment.
6. Make sure that the positive side of the battery is facing outward Fig. 2.
7. Close battery door securely when finished.
Diagrams (drawings, pictures):
1
2
3
4
5
Steps for Use of Product
1. Select the LED light setting you would like to use (see Fig. 3).
a. For constant light, position the switch in the middle position (marked ON).
Document
Version
1

b. To use the “touch activated” setting, position the switch to the position
marked “AUTO”.
i. With the switch on AUTO, you simply need to touch the silver ring
on top of the loupe that surrounds the lens (as shown in Fig. 4) to
activate the light.
2. Once you have selected your LED light setting, place the loupe on top of the subject
you would like to magnify. Focus the magnifier by rotating the top portion of the
loupe until the viewing subject is sharp and clear (see Fig. 5).
Interpretation of Results
Contraindications of Test Results
Documentation
Special Warnings and Cautions
Do not leave batteries installed during extended periods of disuse.
Do not mix new and old batteries. Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
Fire Hazard. Keep magnifier away from direct sunlight to prevent accidental fire.
Do not stare directly at LED lights as this might damage your eyes.
Disposal
Reprocessing Instructions
Point of Use
Preparation for Decontamination
Disassembly Instructions
Cleaning – Manual
Clean lens with a soft, clean microfiber cloth rubbing gently in a circular motion.
Moisten the lens cloth with water if necessary.
Do not use harsh chemicals, solvents or abrasives as they may damage the lens.
Cleaning – Automated
Disinfection
Drying
Maintenance, Inspection, and Testing
Reassembly Instructions
Packaging
Sterilization
Storage
Additional Information
Related Healthmark Products
Other Product Support Documents
Reference Documents
ProSys Brochure, ProSys Price List
Customer Service Contact
Healthmark Industries Company, Inc.
18600 Malyn Blvd.
Fraser, MI 48026
1-586-774-7600
[email protected]
hmark.com
Document
Version
1