Healthstream HS 3.2 EL User manual

HS 3.2 EL
User Manual
H
S
3
.
2
E
L
E
L
L
I
P
T
I
C
A
L
T
R
A
I
N
E
R

index
eSaf ty Caution 2.
3.
4.
15.
19.
28.
Welcome
Build It
BOM Table
Operating It
Training Instruction
Exploded drawing
Intensity
Fat burning
Warm-up
Work-out
Cool down
Success
Part List
Knowing the Display
Function Buttons
Function Description
Switch On
MANUAL MODE
PROGRAM MDE
T.H.R. MODE
USER MODE
WATT MODE

Safety Caution
Before you start training on your exerciser, please read the instructions carefully. Be
sure to keep the instructions for information, in case of repair and for spare part
delivery.
* This exerciser is made for home use or semi commercial use only, and tested up to a
max. body weight of 150kg.
* Follow the steps of the assembly instructions carefully.
* Use only original parts as delivered.
* Before assemble it, be sure to check if delivery is complete by using the included
parts-list.
* For assembly use only suitable tools and ask for assistance with assembly if necessary.
* Place this exerciser on an even, non-slippery surface. Because of possible corrosion,
the usage of any exerciser in moist areas is not recommended.
* Replace defective components immediately and/or keep it out of use until repair.
* For repairs, use only original spare parts.
* In case of repair please ask your dealer for advice.
* Ensure that training starts only after correct assembly and inspection.
* For all adjustable parts be aware of the maximum positions to which they can be
adjusted/tightened to.
* This exerciser is designed for adults. Please ensure that children use the exerciser only
under the supervision of an adult.
* Ensure that those present are aware of possible hazards, e. g. movable parts during
training.
* Warning:incorrect/excessive training can cause health injuries.
* Please follow the advice for correct training as detailed in training instructions.
Consult your physician before starting with any exercise program. They can advice on
the kind of training and which impact is suitable.
*This user manual is only for customers' reference.
* The supplier can not guarantee for mistakes occurring due to translation or change in
All data displayed are approximate guidance and cannot be used in any medical
application.
-2-

Welcome
Thank you for choosing Healthstream.
Lets start an adventure to an energized and more health life streaming.
-3-

BUILD IT
-4-

Cable &
Battery
-5-

STEP 1
-6-

-7-
STEP 2

-8-
STEP 3

-9-
STEP 4
STEP 5

-10-
STEP 6
STEP 7

-11-
STEP 8

-12-
STEP 9

-13-
STEP 10

STEP 11
115

-17-
Part List
NO. DESCRIPTION Q'TY NO. DESCRIPTION Q'TY
1 BASE FRAME 1 67 TURNING PLATF COVER 2
2 UPRIGHT TUBE 1 68 TURNING PEDAL 2
3FIX HANDLEBAR （L）1 69 ROUND END CAP FOR22.2TUBE 2
4FIX HANDLEBAR （R）1 70 PLUG AXLE SUPPORT 6
5 UPPER SWIVEL HANDLE BAR (L) 1 71 BUSHING 4
6 UPPER SWIVEL HANDLE BAR (R) 1 72 M8*70mm ALLEN HEAD SCREW 2
7 LOWER SWIVEL HANDLE BAR (L) 1 73 BUSHING 4
8 LOWER SWIVEL HANDLE BAR (R) 1 74 FOOT COVER 4
9 PEDAL TUBE (L) 1 75 ROUND END CAP FOR42TUBE 2
10 PEDAL TUBE ( R ) 1 76 ROLLER 2
11 OUTER PEDAL POST ( L ) 1 77 MOVING WHEEL 2
12 OUTER PEDAL POST ( R ) 1 78 BEARING <6001ZB> 6
13 FRONT FOOT 1 79 BEARING <6004ZZ> 2
14 MIDDLE FOOT 1 80 BEARING <6203ZB> 2
15 CROSS BAR OF RAIL 1 81 CLIP C12 2
16 RAIL 2 82 CLIP C17 1
17 CROSS FRAME 2 83 CLIP C20 2
18 MAGNETIC HOLDER BRACKET 1 84 ADJSUT FEET 4
19 JOCKEY WHEEL BRACKET 1 85 ROUND SCREW FOR ADJ HEIGH 2
20 AXLE FOR PULLEY 1 86 PULLEY 1
21 AXLE SUPPORT 1 87 SENSOR BRACKET 1
22 MAGNETIC HOLDER 1 88 MAGNET 1
23 WASHER FOR PEDAL 2 89 FRONT CAP FOR CHAIN COVER (L) 1
24 ADJUST FEET BRACKET 4 90 FRONT CAP FOR CHAIN COVER (R) 1
25 AXLE FOR ROLLER 2 91 FRONT SLEEVE 1
26 FLYWHEEL 1 92 HEAD TUBE MIDDLE COVER 2
27 FLYWHEEL AXLE 1 93 FRONT HANDLEBAR COVER 1
28 BUSHING 4 94 BACK HANDLEBAR COVER 1
29 M5*20mm SCREW 8 95 SWIVEL PIVOT COVER - FRONT 2
30 M5*10mm SCREW 8 96 SWIVEL PIVOT COVER - BACK 2
31 M6*10MM SCREW 4 97 SW PEDAL PIVOT COVER - L 2
32 M3*10MM SCREW 1 98 SW PEDAL PIVOT COVER - R 2
33 M4*20MM SCREW 1 99 PEDAL 2
34 M5*10MM SCREW 9 100 FOAM GRIP FOR HANDLEBAR 2
35 M5*50MM SCREW 4 101 FOAM GRIPS FOR FIX HANDLEBAR 2
36 #8*16MM SCREW 4 102 END CAP FOR HANDLEBAR 2
37 M8*18MM SCREW 8 103 SPRING-BIG 1
38 M8*55MM SCREW 2 104 SPRING 1
39 M8*15mm ALLEN HEAD SCREW 14 105 WIRE ROD 1
40 M8*25mm ALLEN HEAD SCREW 4 106 BELT 1
41 M8*20mm ALLEN HEAD SCREW 10 107 CONSOLE SG-7673-71 1
42 M8*56mm ALLEN HEAD SCREW 2 107-1 M5*12MM PHILIPS HEAD SCREW 4
43 M8*118mm ALLEN HEAD SCREW 4 108 SENSOR WIRE 1
44 M8*15mm HEX HEAD BOLT 2 109 MOTOR DC WIRE 1
45 M8*52MM HEX HEAD BOLT 1 110 HAND PULSE SENSOR 2
46 M6*18MM HEX HEAD BOLT 4 111 HAND PULSE WIRE 2
47 M8*25MM HEX HEAD BOLT 1 112 UPPER COMPUTER CABLE 1
48 M8 CURVE WASHER 6 113 LOWER COMPUTER CABLE 1
49 M10*24*0.3T NYLON WASHER 2 114 MOTOR 1
50 M5*19*1.5 WASHER 8 115 BATTERY 1
51 M8*16*1.2 WASHER 2 116 M8*65mm HEX HEAD BOLT 1
52 M8*16*1.2 WASHER 28 117 M6 NUT 1
53 M8*22*1.5T WASHER 1 118 M6 WASHER 1
54 M8*28*2.0T WASHER 2 119 M6 WASHER 1
55 M8*38 *2.0TWASHER 4 120 COVER 1
56 M10*21*2.0T WASHER 2 121 TOOL 1
57 M10*22*1.5T WASHER 4 122 TOOL 1
58 M5 SPRING WASHER 8 123 TOOL 1
59 M6 SPRING WASHER 124 TOOL 1
60 M8 SPRING WASHER 125 JOINT PEDAL TUBE 2
61 M8 SPRING WASHER 126 NUT(M8) 4
62 M10 SPRING WASHER 127 SCREW(M16) 2
63 NYLOC NUT M6 128 PLASTIC BUSH FOR JOINT PEDAL TUBE 4
64 NYLOC NUT M8 129 M8 WASHER 4
65 3/8"*9T WH NUT 130 PLUG AXLE SUPPORT
131 GENERATOR SYSTEM
4
1
66 3/8"*7T WH NUT
4
2
40
4
5
2
2
2

-18-
Part List
NO. DESCRIPTION Q'TY NO. DESCRIPTION Q'TY
132 FLAT WASHER 4 1
133 SCREW (M4*12)
134 SMALL PULLEY
135 SCREW (M5*10)
136 CONTROLLER
137 USB CABLE (UPPER)
138 USB CABLE (LOWER)
139 PULSE CABLE (LOWER)
4 1
1 1
2 1

knowing the display
current mode
current
resistent level
indicate heart rate
if you grap the grib
traveled
distance
current
speed
power
consumed
current
output power
time spent
charging
battery state
discharging
Operating It
-19-