Heart of House 515/3385 User manual

Important - Please read these instructions fully before starting assembly
Width - 122 cm
Depth - 122 cm
Height - 75 cm
Dimensions
issue 1 - 19/10/15
Oakington Dining Table
515/3385
Assembly Instructions - Please keep for future reference
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 640 0800

Check you have all the
components and tools listed
on pages 2 and 3.
Remove all fittings from the
plastic bags and separate
them into their group.
Keep children and animals
away from the work area,
small parts could choke if
swallowed.
Do not stand on the
product, this could cause
damage.
Assemble the item as close
to its final position (in the
same room) as possible.
Make sure you have enough
space to layout the parts
before starting.
Assemble on a soft level
surface to avoid damaging
the unit or your floor.
Dispose of all packaging
carefully and responsibly.
Parts of the assembly will
be easier with 2 people.
Look for this logo.
Important -Please read these instructions fully before starting assembly
!Safety and Care Advice
1
Solid Wood / Real Wood Veneers
Care and maintenance
·This product has been finished using natural materials. As a living material, you may
notice some variation in the grain and colour shade between the different components.
·Unlike a synthetic or man-made material which has a uniform finish, a feature of
natural wood is its variation in grain and colour. We wish to reassure you that this is quite
normal and is not the result of any manufacturing fault.
·Where sheets of wood are joined together, a line may be detected. Again, this is
normal and is not an imperfection.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
From time to time check
that there are no loose
screws on this unit.
Only clean using a damp
cloth and mild detergent, do
not use bleach or abrasive
cleaners.
Nature wood often have random pale markings in the grain, there are medullary
rays which are a natural unique feature of the wood.
Always use a non-silicone
based furniture polish.
Silicone in furniture
polishes can break down
the lacquer finish of leg
frame.
Use non-silicone bees wax
to maintain the shine. Do
not use furniture polish.
Any spills should be
removed immediately with
a soft, clean, damp cloth
and dried immediately.
Ensure the product is
protected with mats and
coasters when items are
placed on the surfaces, to
prevent scratching or
demage.
Avoid keeping furniture in
direct sunlight or close to
any heat sources as this can
cause cracking, discoloration
or warping.
Never drag pieces of
furniture across the floor
as this will cause damage
to the joints.
Do not put hot dishes
directly on the surfaces of
the item.
Do not lift the glass top
when moving the table,
please lift from the
wooden base frame only.

2
Please check you have all the parts listed below
Components - Parts
Glass table top (Ø122 x 1cm)
1
Short leg (lower)
(65 x 8cm)
4
Long leg (138 x 8cm)
2
Long leg (138 x 8cm)3
Short leg (upper)
(65 x 8cm)
5
If you have damaged or missing components,
call the customer helpline: 0345 640 0800

3
17016015014013012011010090807060504030
20
10
0
5 15 25 35 45 55 65 75 85 95 105 115 125 135 145 155 165
150140130120110100908070605040302010
0
Ruler/tape
measure
Allen key M4 x 1
Ø10x40 Wooden Dowel x 4
Tools required
ABC
DE
M8x150mm Long Threaded Rod x 1
F
Washer x 1
GH
Note: The quantities below are the correct amount to complete the assembly. In some cases
more fittings may be supplied than are required.
Please check you have all the fittings listed below
Components - Fittings
Ruler - Use this ruler to help correctly identify the bolts
Semicircular Washer x 1
J
K
M8 Hex Nut x 1
Spring Washer x 1
M8x50mm Short Threaded Rod x 3 M8x18mm Female nut x 3
Spanner x 1

Assembly Instructions
Step 1
Step 2
Preparing short legs
Insert wood dowels
into the ends of short
legs and .
Locating long legs
Locate long legs and
together as shown.
4
A
4 5
B
5
Screw long threaded
rod into the central
hole of upper short
leg .
32
Note: Ensure the holesin
one end of legs and
are located on the same
side as shown.
3
2
4
A
AA
A
A
B
5
Hole
Hole
3
2

Assembly Instructions
Step 3
Step 4
Assembling leg frame
With help, assemble
the upper and lower
short legs and on
either side of the long
legs as shown.
Preparing glass top
With help, carefully
place glass top
upside down onto a
clean flat surface.
Screw short threaded
rods into the metal
discs on the underside
of the glass top.
5
1
H
H
H
H
4 5
Note: Ensure the fixing
holes are located as
shown.
1
Secure the assembly
using fixings
and
Note: Do not fully
tighten at this stage!
H
4
5
3
2
Note: The polystyrene
foam packaging could
be used for this
purpose.

Assembly Instructions
Step 5
Assembling leg frame
onto glass top
a: With help, carefully
align the leg frame onto
glass top .
6
1
b: Secure using female
nuts J
1
1
J
J
J
K
J

Assembly Instructions
Step 6
Step 7
Final tightening
Fully tighten nut
inside lower short leg
Turn upright
With help, carefully turn
the table upright.
7
If you need help or have damaged or missing parts,callthe Customer Helpline: 0345 640 0800
Home Retail Group, 489-499 Avebury Boulevard, Saxon Gate West. Central Milton Keynes MK9 2NW
4
C
Assembly is complete
Warning:
The table is
heavy. Lift with care.
Important:
Do not use the
glass top to lift the table
as it may damage the
fixing points. Lift using
the wooden leg frame
only!
Do not lift using glass top.