Heart of House Somersham 404/6895 User manual

404/6895
Issue 1 - 03/16/15
59cm
15.5cm
53cm
Somersham Oak Bathroom Wall Cabinet
3

Components - Panels
Please check you have all the panels listed below
2
If you have damaged or missing components,
call the Customer Helpline:03456 400800
12 Left side panel Right side panel
Back panel
3
456
78Back rail 9
Adjustable shelf
Bottom panel
Shelf
Door panel x 2
Top panel

Components - Fittings
Please check you have all the fittings listed below
Note:The quantities below are the correct amount to complete the assembly .In some cases more
fittings may be supplied than are required.
D
A
GH
E
B C
F
3
Wooden handle x 2
Hinge x 4
Φ4 x 12mm Screw x 16
Φ4 x 30mm Screw x 4 Wooden dowel x 16
Metal Support x 4
Locking Pin x 4 Locking Nut x 4
I
J
Φ4 x 45mm Screw x 2
Wall plug(for solid wall only) x 2
Ruler - Use this ruler to help correctly identify the screws
Tools required
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
(medium & large)
Phillips screwdriver Small
hammer
Ruler/tape
measure
Flatblade screwdriver
(medium)
6mm Suitable drill bit
(for use with wall plug)
Eye protection
(when using a
hammer or glue)
Hammer Drill
(Only for dril hole on the wall)
K
Cam cap x 4
L
Screw cap x 4
M
Screw cover x 16

Assembly Instructions
4
Step 1
Insert wooden dowel to bottom
panel ,shelf and back rail
as shown.
Attach lelf side panel and right
side panel to bottom panel,
shelf and back rail as shown.
Insert locking nut into bottom
panel .
Use a screwdriver to turn the
locking nut clockwise to lock.
B
Fitting locking pin
5
3
1
4
1
1
2
2
8
3
24
5
1
2
Screw 4 x locking pin into top
panel , left side panel and
right side panel .
1
2
3
AA
B
B
Assembling side panel
Step 8
Step 2
H
H
8
NOTE:It would be useful to ask
someone to help you at this stage.

1
6
1
7
2
5
6
Assembly Instructions
Step 3
5
Insert metal supports into left
side panel and right side panel.
Carefully put the adjustable shelf
on it.
Assembling back panel and top
panel
Assembling adjustable panel
F
Step 8
Step 4
2
7
Slide down back panel along
grooves in lelf side panel and right
side panel .
Insert wooden dowels to lelf
side panel and right side panel
.
5
Tighten the locking nut to secure
the unit.
Carefully place the top panel
onto the unit. Insert locking nut
into left side panel and right side
panel.
B
F
HH
B
NOTE:It would be useful to ask
someone to help you at this stage.

C
D
9
9
9
b:
a:
Assembling door panel
NOTE:It would be useful to ask
someone to help you at this stage.
G
a:
Use 12mm screws to fix hinges
onto door panel .
Use 30mm screws to fix handle
onto door.
A
6
Assembly Instructions
Step 8
Step 5
9
D
E
9
C1
C1
C1
C2
C2
Adjust the door up or down, left or
right, in or out if needed as shown:
1. Loosen two screws and adjust
the door up or down, then fix
screws again.
2. Loosen screw and adjust the
door in or out, then fix screw
again(loose screw clockwise
first help to adjust door in or out if
needed).
3. Loosen screw and adjust the
door left or right, then fix screw
again.
D
D
b:
Carefully attach door panel
to the unit by fixing hinge onto
side panel with 12mm screws .
C
D
D
G
E
C2
C1
D
1
3
2

a:
b:
NOTE:It would be useful to ask
someone to help you at this stage.
Finishing the unit
After above assembly, please
double check and make sure all
screws are firmly fixed before use.
A
7
Assembly Instructions
Step 8
Step 6
NOTE:If you have damaged or missing components,
call the Customer Helpline:03456 400800
Argos LTD,489-499 Avebury Boulevard,
Central Milton Keynes, MK9 2NW
J
b:
Use 45mm screw and wall plug
to fix the unit on the wall as
shown.
I
J
I
K
M
K
K
K
M
L
L
a:
Use cam caps to cover the
visible cams as shown.
Use screw caps to cover the
visible screws as shown.
Use screw covers to cover the
visible screws of door panel as
shown.
K
L

A Guide to - Wall Mounting & Fixings
Revision 2 - 7/10/09
Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
a specialist tting in this case. For light
loads, general purpose wall plugs can
be used.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
For use when tting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
plasterboard. The hammer xing allows
it to be xed to the wall rather than the
plasterboard. Always check the xing
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well tted and are a tight t in the
drilled hole.
If plastic wall plugs
are supplied with your
product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
using incorrect xings is the
responsibility of the installer.

SAFETY WARNING INFORMATION BS7449 : 1991
Keep these instructions for future use: Catalogue Number: 404/6895(D)
Manufacture date: Apr. 23th, 2015
Retailer: Argos
Retailer address: 489-499 Avebury Boulevard
Saxon Gate West
Central Milton Keynes
WARNINGS Bucks, MK9 2NW
*Do not place very hot or very cold items against or in
close proximity to glass surface unless an adequately This unit contains film backed mirror of nominal thickness
thick insulating material is used to prevent such items of 3 mm
from coming into contact with the glass. This unit contains safety film backed mirror of a
nominal thickness of 3 mm, which is not required to be
*Do not strike the glass with hard or pointed items. classified to BS6206 Class C.
* Do not sit or stand upon horizontal glass surfaces. If a glass is chipped or broken replace with
*When cleaning glass panels or mirrors use a damp glass of the type described on this label. Consult the
or leather with washing up liquid or soft soap if necessary; manufacturer, retailer, or agent with regard t
o
do not use washing powders or any other substance obtaining a manufacturing specification and shape for
containing abrasive since these substances scratch glass. replacement glass quoting the model number, and batch
number or date of manufacture.
*It is essentail that this unit is fixed to a wall with the fixings provided.