Heart of House Whitby 418/2292 User manual

whitby pair of dining chairs
Assembly Instructions - Please keep for future reference 418/2292
HEART
HOUSE
of
dimensions
important - please read these instructions fully before starting assembly
if you need help or ha e damaged or missing parts, call the
Customer Helpline : 345 64 8
width - 44 cm
height - 90 cm
depth - 51 cm
if you need help or ha e damaged or missing parts, call the
Customer Helpline : 345 64 8
issue 1 - 12/06/15

safety and care advice
Important - Please read these instructions fully before starting assembl
keep these instructions for do not use this item if any dispose of all packaging
future use. components are missing or carefully and responsibly.
damaged.
check you have all the to reduce the
components and tools listed during assembly children likelihood of damaging
on the following pages. should be kept away from the your product please
product due to possible risk of ensure that your power
during assembly do not injury. drill is set on a low
stand or put excessive weight torque setting.
on the product, this could remove all fittings from the
cause damage. plastic bags and separate them
into their groups.
parts of the assembly will be
easier with people.
solid wood/ real wood veneers
this product has been finished using natural materials. As a living material, you may notice some
variation in the grain and colour shade between the different components.
unlike a synthetic or man-made material which has uniform finish, a feature of natural wood is its
variation in grain and colour. We wish to reassure you that this is quite normal and is not the result of
any manufacturing fault.
where sheets of wood are joined together, a line may be detected. Again, this is normal and is not
an imperfection.
care and maintenance
clean using a damp cloth or a this product should not be
proprietary domestic furniture discarded with household
polish. Do not use abrasive waste.
cleaners. take to your local
authority waste disposal only
assemble all parts and bolts regularly check and ensure
loosely during assembly, only that all bolts and fittings are
once the product is complete tightened properly.
should you fully tighten the bolts.
handy hints
1

If you have damaged or missing components,
call the Customer Helpline : 0345 640 080
please chec you have all the parts listed below
3 seat support x4
(2.0 x 5.8 x 34.5cm)
1 bac rest x2 4 seat pad x2
(44 x 90cm) (34.5 x 41.5cm)
components - parts
5stretcher x4
(1.3 x 3 x 38.3cm)
2 front leg x2
(3.3 x 38 x 43.0 cm)
2

If you have damaged or missing components,
call the Customer Helpline : 0345 640 080
please chec you have all the fittings listed below
Note : The quantites below are the correct amount to complete the assembly. In some cases more required.
fittings may be supplied than are required.
m6 x 50mm allen screw x 12 spring washer x 12
wood dowel x 8 allen ey x 1
35mm wood screw x 14
components - fittings
A
B
C
E
D
tools required
philips screwdriver allen ey (supplied)
(not supplied)
3

assembly instructions
Step 1
Preparing front legs
Place front leg face down
onto the floor.
Fit wood dowels into the holes in front
leg as shown.
Carefully align seat supports
onto front leg and secure
using fixings and .
Note
NoteNote
Note : Do not fully tighten at
this stage.
Locate stretchers into the
lower holes in front leg and
push firmly into position.
5
5
3
3
3
5
d
a
b
c
a
b
d
push firmly into position.
Note :
Note :Note :
Note : Ensure the fixing holes
in stretchers are facing down.
Secure stretchers using
screws .
Step
Attaching back rest
Lay back rest flat on the floor
with the fixing holes facing up.
Carefully align the seat supports
and stretchers with the holes in
back rest.
Secure using fixings and
for the seat supports and screws
for the stretchers .
Note
NoteNote
Note : do not fully tighten fixings at
this stage.
5
5
1
5
5
1
5
a
b
c
c
b
a
c
1
3
3
3
this stage.
4