Heart of House Amberley spindle chair 457/3760 User manual

amberley spindle chair
Assembly Instructions - Please keep for future reference
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
Issue 1 - 20/06/16
Dimensions
Width - 53.5cm
Depth - 51cm
Height - 86.5cm
457/3760

Care and maintenance
Handy Hints
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• Do not stand on the chair.
• Do not use this chair as step
ladder.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the
bolts.
• Regularly check and ensure
that all bolts and fittings are
tightend properly.
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product, this
could cause damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Unit weight: 6 kgs.
• Maximum safe weight of user:
110kgs.
1
Safety and Care Advice
Important - Please read these instructions fully before starting assembly

2
Seat Frame
(53.5 x 45 x 46.5cm)
1Left Leg Frame (FL)
(4 x 44.5 x 43.5cm)
2Right Leg Frame (FR)
(4 x 44.5 x 43.5cm)
3
Stretcher
(Ø2.8 x 33.8cm)
4
Note: The quantities below are the correct amount to complete the assembly of 1 chair.
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly of 1 chair. In some cases more
fittings may be supplied than are required.
A
D
M7 x 35mm Screw x 6
B
Barrel Nut x 2
C
M6 x 50mm Bolt x 2
Wood Cap x 2
E
Allen Key x 1
F
Foot Pads x 4
Tools required
Crosshead screwdriver
Components - Parts
Please check you have all the parts listed below
If you have damaged or missing components, call the
Customer Helpline: Argos = 0345 640 0800
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105

3
Assembly Instructions
FL
FR
FR
FL
FR
FL
FR
FL
FR
FR
FL
4
4
2
3
1
1
2
3
3
3
A
A
AC
B
B
B
B
B
B
B
C
C
Attaching stretcher
Attach the stretcher
into the holes on left leg
frame and right leg
frame as shown.
Place the barrel nuts
into the holes on the
stretcher. Then align the
holes on the barrel nut by
turning it using a
crosshead screwdriver to
be able to fix the bolts
through holes on the
legs. Tighten the bolts
using the allen key .
Important note:
Ensure to
correctly position
the leg frame
marked with “FL”
(front left) and
“FR” (front right).
Important note:
Do not fully
tighten bolts at
this stage
Step 1
Step 2
Attaching leg frames
Place the seat frame
upside down on a raised
protected surface.
Position the assembled
legs making sure part of
the legs with labels “FL”
and “FR” are on the front
of seat frame as shown.
Then fix through the
holes using the screw
.
Important note:
Before fully
tightening the
screw , fully
tighten the bolts
assembled in
step 1 first.
4
1
2
3
C
A
E
B
A
B
Sticker
”FL” Sticker
”FR”
Sticker
”FL” Sticker
”FR”
Sticker
”FR”

4
Assembly Instructions
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
2
2
3
D
D
F
F
F
F
D
FL
FR
23
Step 3
Attaching foot pads
Remove backing from
foot pads and carefully
position on the bottom of
the leg frames and
as shown.
2 3
F
Step 4
Attaching wood caps
Carefully turn the chair
upright and place the
wood caps into the
holes on the leg frames
and as shown.
Assembly is complete.
2 3
D