Heart of House 239/2077 User manual

Important - Please read these instructions fully before starting assembly
Width - 70 cm
Depth - 70 cm
Height - 45 cm
Dimensions
issue 1 - 23/05/14
Oakington X Leg Glass Coffee Table
239/2077
Assembly Instructions - Please keep for future reference
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 640 0800

1
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their group.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Do not stand on
the product, this could
cause damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Make sure you have enough
space to layout the parts before
starting.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
Important -Please read these instructions fully before starting assembly
!Safety and Care Advice
Solid Wood
Care and maintenance
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
From time to time check that
there are no loose screws on
this unit.
Only clean using a damp cloth
and mild detergent, do not use
bleach or abrasive cleaners.
·This product has been finished using natural materials. As a living material, you may notice some
variation in the grain and colour shade between the different components.
·Unlike a synthetic or man-made material which has a uniform finish, a feature of natural wood is its
variation in grain and colour. We wish to reassure you that this is quite normal and is not the result of
any manufacturing fault.
·Where sheets of wood are joined together, a line may be detected. Again, this is normal and is not
an imperfection.

2
Please check you have all the parts listed below
Components - Parts
Glass table top (Ø70 cm x 1 cm)
1
Short leg (lower)
( 32.6 x 5.5 cm)
4
Long leg (70.7 x 5.5 cm)
2
Long leg (70.7 x 5.5 cm)
3
Short leg (upper)
( 32.6 x 5.5 cm)
5
If you have damaged or missing components,
call the customer helpline: 0345 640 0800

3
170
160
150
14013012011010090807060504030
2010
0
5 15 25 35 45 55 65 75 85 95 105 115 125 135 145 155 165
150140130120110100908070605040302010
0
Ruler/tape
measure
Allen key M4 x 1
Ø10x30 Wooden Dowel x 4
Tools required
ABC
D E
M8x110mm Long Threaded Rod x 1
F
Washer x 1
G H
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Please check you have all the fittings listed below
Components - Fittings
Ruler - Use this ruler to help correctly identify the bolts
Curved Washer x 1
J
K
M8 Hex Nut x 1
Spring Washer x 1
M8x40mm Short Threaded Rod x 3 M8x18 mm Female nut x 3 Spanner x 1

Assembly Instructions
Step 1
Step 2
Preparing short legs.
Insert wood dowels into
the ends of short legs
and .
Locating long legs
Locate long legs and
together as shown.
4
4
A
A
A
A
A
2
3
B
5
AA 4
5
B5
Screw long threaded rod
into the central hole
of upper short leg .
32
Hole
Hole
Note: Ensure the holes in
one end of legs and
are located on the same
side as shown.
32