Knight Ergoplan Coffee Table User manual

knightgroup.co.nz
Assembly Instructions
Tools Required: Philips Screwdriver
Ergoplan Coffee Table

Assembly Instructions
knightgroup.co.nz
Recommended
2 Person Assembly
Thank you for purchasing Knight product, please carefully read the assembly instructions prior to installment to gain a complete
understanding of the product. It provides you with important information about the safety, use, installation and maintenance.
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS REGARDING
THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.
SAFETY
• The product must be used in a safe manner. Inappropriate use may cause damage to the product and/or cause bodily harm to
the user or persons nearby.
• Don’t locate furniture in direct sunlight or near air-conditioning inlet or heating radiator.
• Don’t put high-temperature or frozen objects on furniture.
• Safely carry product to location of assembly.
• Retain this operation manual and pass it on to any future owner.
SET UP AND INSTALLATION
• Assemble the product according to the assembly instructions.
• To prevent possible scratches or damage, assemble the product on a soft surface such as a blanket, carpet or packaging.
• Place the product a safe distance from window frames, radiators, furniture etc. so that persons cannot become trapped.
It is recommended that this product is assembled by 2 people.
Any questions contact Knight on 0800 143 143
Due to continuous improvement of our products, our assembly instructions may not be in complete accordance with the product
and we apologise in advance.
Ergoplan Coffee Table

Assembly Instructions
knightgroup.co.nz
Ergoplan Coffee Table
Parts
Item Description Quantity
ATop Panel 1
XLeft Side Panel 1
ZRight Side Panel 1
FImmovable Panel 1
DCentre Base Panel 1
The turning direction
of attaching
Incorrect Correct
A
X
Z
F
D

Assembly Instructions
knightgroup.co.nz
Ergoplan Coffee Table
Item Description Quantity
c1 6x35 Cam Bolt 12
d1 8x30 Dowel Pin 12
c2 Cam Sticker 12
b1 Bracket 4
s1 3.5x15 Screw 16
Parts
c1 6x35 Cam Bolt d1 8x30 Dowel Pin c2 Cam Sticker b1 Bracket s1 3.5x15 Screw
Cam
(pre-installed)

Page 1
Assembly Instructions
knightgroup.co.nz
Step 1
Page 1
Assembly Instructions
Ergoplan Coffee Table
Preparation for top panel A, left side panel X, right side panel Z, centre base panel D and immovable
panel F.
1. lnsert cam bolts (c1) into the panel A and F.
2. lnsert dowel pins (d1) into the panels F and D.
3. lnsert cam bolts (c1) and dowel pins (d1) into panels X and Z.
X
A
F
D
Z
d1
d1
d1
d1
d1
c1
c1
c1
c1
c1
d1
d1

Page 2
Assembly Instructions
knightgroup.co.nz
Page 2
Assembly Instructions
Ergoplan Coffee Table
Step 2
Centre base panel D and immovable panel F assembly.
Insert cam bolts (c1) on panel F into cams on panel D and tighten in a clockwise direction.
F
D

Page 3
Assembly Instructions
knightgroup.co.nz
Page 3
Assembly Instructions
Ergoplan Coffee Table
Step 3
Left side panel X, right side panel Z, centre base panel D and immovable panel F assembly.
Insert cam bolts (c1) on panels X and Z into cams on panels F & D and tighten in a clockwise direction.
F
D
X
Z

Page 4
Assembly Instructions
knightgroup.co.nz
Page 4
Assembly Instructions
Step 4
Ergoplan Coffee Table
Top panel A assembly.
1. Insert cam bolts (c1) on panel A into cams on panels X & Z and tighten in a clockwise direction.
2. Cover top of cams with cam stickers (c2).
A
X
Z
F
c2

Page 5
Assembly Instructions
knightgroup.co.nz
Page 5
Assembly Instructions
Step 5
Ergoplan Coffee Table
Connect panel A & Z and panel A & X with brackets (b1) using screws (s1). 
A
X
Z
F
D
b1
s1

Page 6
Assembly Instructions
knightgroup.co.nz
Page 6
Assembly Instructions
Ergoplan Coffee Table
Complete