HESA PARTS NAVCOMM User manual

HESAPARTSNAVCOMM
UserManual
Rev1,010/06/23
NAVCOMM is a Plug & Play device, with Bluetooth connectivity. Power supply: 12V or
USB connection, so it requires electrical installation in the vehicle.
NAVCOMM is fully waterproof, making it able to withstand rain and dust.

1. DESCRIPTION
2. INSTALATION
 NAVCOMM is designed for installation on standard 22mm handlebars.
 You must create an adequate space (minimum 23mm) between the grip and the
switch handlebar of your motorcycle.
Depending on your driving style (standing or sitting) rotate the NAVCOMM until you
find a comfortable position to access all controls
Use the provided flange and the two M4 screws to fix the NAVCOMM to the
handlebar. Requires a 2.5mm allen key (not provided)
 Position the power cable correctly, passing it along with the cables of the original
switch control. Replace the clamps that hold the cable.
 Make sure that the power connection is made in a socket with a contact key. Never
carry out the installation directly to the battery. In the case of making the connection
via USB, make sure that the USB power supply is properly connected to a power
supply with an ignition key.
3. USE
NAVCOMM is a completely independent device. It does not need any additional
application or configuration. Being a Plug&Play device, after the NAVCOMM
connection it will always be ready for use.

3.1 First Connection
Once the installation of the device is done, we will proceed to make the first
connection. For this we will give power to NAVCOMM through the ignition key. The
LED will flash blue and red successively.
 We perform a search in the Bluetooth menu in available devices, and HESANAV will
appear. Click on it for pairing. If you ask for confirmation, we will accept.
Once the connection is made, the led will flash in Cyan color (Mode 1)
 After the first connection, NAVCOMM will automatically connect to any previously
linked device without having to do anything, just have the bluetooth of the device
connected and NAVCOMM powered
(NOTE: Since the NAVCOMM does not run on batteries or battery, it will never go into sleep state)
3.2 LED color & Mode
 NAVCOMM has 3 modes of use. The current mode is easily recognizable by the
color of the led. The colors are the following:
1. CYAN __________ Mode 1 ______________ DMD2
2. BLUE __________ Mode 2 ______________ GPS NAVIGATION
3. RED __________ Mode 3 ______________ ROADBOOK / MUSIC
When starting NAVCOMM it is always in mode 1.
 To change the mode, simply press the button (1) for a few seconds until the led
remains fixed, indicating the new mode with the color.
Being in mode 3, when changing modes the cycle becomes mode 1.
In normal operation, NAVCOMM will always flash slowly indicating the current
mode.
3.3 Operation modes
All the functions described in the 3 modes below, do not need double clicks or complex
access methods.
All functions with a click act once, and by holding down they act repeatedly as long as the
application allows it.

Mode 1 _________ DMD2 (Cyan LED)
With the Directional Joystick (4), we can move across the screen up and down, left
and right.
By pressing button (1), we select the option that is active at that moment.
Keeping the button (1) pressed inwards, we change from the lower menu to the
control screen and vice versa
The buttons (2) and (3) are special functions that will only work on certain screens
or applications of the active system. For example, in Roadbook mode, with these
buttons we will add or subtract meters in the trip. In GPS mode, we will zoom + and
zoom -
The colored button (1) can also have some special function in certain cases.

Mode 2 __________ GPS NAVIGATION (Blue LED)
 NAVCOMM is optimized to work with OSMAND. However, it is capable of
maintaining the main functions such as moving the map and zooming in most
applications currently in use.
With the directional joystick (4) we will move the map in the 4 directions. Leaving
the lever pressed, a constant movement will be made
By pressing the joystick (4) inwards, we will center the map on the current position
With the buttons (2) and (3) we will zoom + and zoom –respectively
The color button (1) changes the orientation of the map.
Mode 3 ___________ROADBOOK / MUSIC (Red LED)
To simplify the operation of NAVCOMM , the Roadbook and Music functions have been
unified in the same mode... which greatly simplifies the operation of the system and avoids
having to remember cumbersome menus and options
Music Apps
Joystick (4) up or down we go to the next or previous song
Joystick (4) in, play / pause
Button (2) and (3) volume up and down
Roadbook Apps
In most applications, the controls to control the roadbook will be the following:
Joystick (4) up or down, raises or lowers the roadbook (pdf up or down)
 Button (2) and (3) raise and lower the meters of the trip

However, for more complete and configurable applications, the following functions can be
added to the previous controls:
Color button (1) Resets the trip
Joystick (4) right or left, adds or subtracts meters in trip 2 (configurable)
Joystick (4) inwards, reset trip 2 (configurable)
4. Operating considerations
Never exceed the parameters specified in section 5 of this user manual, otherwise
NAVCOMM may be totally or partially damaged and exempt from any warranty.
 The device has a protection system against reverse polarity, however, make sure
before making the connection of the correct polarity of the power cables.
If you are not sure that you can carry out the installation explained in chapter 2
correctly, leave it in the hands of professionals.
Never pull the power cable coming out of the NAVCOMM to the outside.
Never bend or pinch the power cord.
Never make the NAVCOMM connection if you detect any part of it in poor condition.
It is advisable not to leave the NAVCOMM exposed in hot places to direct sunlight
for hours, in case of doing so, cover the NAVCOMM with some piece of clothing.
Do not apply the pressure water nozzle directly on NAVCOMM , even though it is
waterproof it is not designed to withstand high pressure.
5. Specifications
 Voltage : 5V to 30V
Approximate consumption of 40mA
 No official waterproof suite tests have been conducted, so an official overall IP
rating cannot be assured. However, NAVCOMM is designed to withstand water and
dust, with IP67 components.
 NAVCOMM includes mechanical buttons and precision joystick. Designed to work
in extreme conditions, but with limited pressure:
◦The normal operating forces for the joystick and buttons is 0.25k.
The maximum forces that it is capable of withstanding is 1.5kg before it breaks.
• USB power connection or two 6.3mm faston connectors
6.Disclaimer
 NAVCOMM was designed for legal off-road use. The use of this device under legal
circulation conditions is under the responsibility of the user.
 HESAPARTS is not responsible for damage caused to the electrical installation of
the vehicle in case of incorrect installation. Likewise, there will be no possible
guarantee of the device.
 All manuals will be distributed electronically. They will never be delivered on paper