Hi Sharp HS-4IN1-T067AA User manual

HD Analogue Camera_ Manual

2
Contents
SAFETY PRECAUTIONS ..............................................................3
Specification ..................................................................................4
Product contents..........................................................................5
Product overview .........................................................................6
Dimension.......................................................................................7
COC (control over coaxial) function ......................................8
OSD Menu ......................................................................................9
Connection.................................................................................. 14

3
SAFETY PRECAUTIONS
Please read before using
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of insulated dangerous
Voltage within the product’s enclosure that may be sufficient magnitude to
constitute risk of electrical shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operation and maintenance (servicing)
instructions in the literature accompanying the appliance.
1. Please read the service manual in details before using.
2. Don't try to disassemble the chassis or the part easily, in case that touch the
power by mistake, is shocked by electricity the danger or caused inside parts
to be damaged.
3. Do not attempt to service this unit yourself unless you are authorized to do
so. Opening cover may exposure you to dangerous voltage or other hazards.
Refer all servicing to qualified personnel only.
4. When being regular, please lock the parts firmly first to prevent the machine
damage.
5. Please connect correctly in accordance with the regulation, prevent the
machine from using, or striking improperly.
6. Please don't use any organic solution or the corrosively sanitizer to insert
and wipe away the chassis outside. While inserting and wiping away, please
turn off the power, and use the clean cloth is stained with letting a small
amount of branch water, insert and wipe away appearance.
7. The contents of this manual are subject to change without notice.

4
Specification
Image unit
1/2.9” SONY CMOS : 2.0 Mega
Resolution
1920(H) x 1080(V)
Video Output
AHD / CVI / TVI / CVBS
Synchronization
Internal
Scanning System
2:1 interlace
S/N Ratio
More than 60 dB ( AGC OFF)
Electronic Shutter
Auto 1/60 (1/50) ~ 1/50,000 sec
Min. Illumination
0.01Lux ( F1.4 , AGC ON)
Lens Type
Board Lens: 3.6 mm / 6 mm
Coxial Cable Transmition
Distance(3C/5C)
300 M / 500 M
Twisted Cable Transmition
Distance (Cat5e standard)
200 M
Power Source
DC 12 V ± 10% / 1 A
Adaptor
Optional
Operating Temperature
-10 ℃~ 50 ℃(14 ℉~ 122 ℉)
Storage Temperature
-20 ℃~ 60 ℃(-4 ℉~ 140 ℉)
Please use suitable adapters DC12V ± 10%≧1A . Otherwise, this product will be damaged.

5
Product contents
This model is available in two brackets, with different bracket
accessories.
Bracket 1 :
Item
Figure
Trapping Screw × 3
Anchor × 3
Bracket 2 :
Item
Figure
Trapping Screw ×5
Anchor × 3

6
Product overview
Item
Description
Item
Description
①
Power cable (DC 12 V± 10%)
⑤
Lens
②
BNC cable
⑥
Bracket
③
OSD button
④
Camera

7
Dimension
Unit : mm

8
COC (control over coaxial) function
①Enable the channel which you want to configure, and choose COC
(control over coaxial) function under PTZ Protocol page.
②Click the right button of the mouse, choose PTZ Control.
③Click ” Iris + “ to open OSD menu.
※Notice : When you are inside the camera OSD, if there is suddenly power
shortage, the setting will not be saved in the memory. You must exit the OSD
or wait the OSD disappears to validate the modified setting in the memory.
Icon
Description
Open the OSD menu of camera / Enter
Adjustment parameter options
Direction button, in order to choose the
item that you want to config.

9
OSD Menu
Notice : ”(xxx)”means (default value)
LENS
MANUAL (Default)
DC
MODE
OUTDOOR
(DEFAULT)
MIN SHU
1/30
MAX SHU
(1/2000),1/5000,1/10000,1/50000,
1/60,FLK,1/240,1/480,1/1000
RETURN
INDOOR
IRIS SPEED
0~15(8)
RETURN
RET,SAVE&END
EXPOSURE
SHUTTER
1/30,1/60,FLK,1/240,1/480,1/1000,1/2000,1/5000,1/10000,1/50
000,X2,X4,X6,X8,X10,X15,X20,X25,X30,AUTO (AUTO)
AGC
0-15 (13)
SENS-UP
OFF
AUTO
(Default)
SENS-UP
X2,X4,X6,X8,X10,X15,X20,X25,
X30,(X2)
RETURN
RET,SAVE & END
BRIGHTNESS
1-100 (50)
D-WDR
OFF
ON
LEVEL
0-8 (5)
RETURN
RET,SAVE & END
AUTO (Default)
DEFOG
OFF (Default)
AUTO
POS/SIZE
POSITION, SIZE,RET,AGAIN
GRADATION
0-2 (0)
DEFAULT

RETURN
RET,SAVE & END
RETURN
RET,SAVE & END
BACK
LIGHT
OFF (Default)
BLC
LEVEL
MIDDLE、HIGH、LOW (MIDDLE)
AREA
POSITION, SIZE,RET,AGAIN
DEFAULT

RETURN
RET,SAVE & END
HSBLC
SELECT
AREA1,AREA2,AREA3,AREA4 (AREA1)
DISPLAY
OFF
ON (Default)
POSITION, SIZE,RET,AGAIN

10
BLACK MASK
ON, OFF (ON)
LEVEL
0-100 (20)
MODE
ALL DAY
NIGHT
(Default)
AGC
LEVEL
0-255 (48)
RETURN
RET,SAVE & END
DEFAULT

RETURN
RET,SAVE & END
WHITE BAL
ATW (Default)
AWC →SET
INDOOR
OUTDOOR
MANUAL
BLUE
0-100 (63)
RED
0-100 (43)
RETURN
RET,SAVE & END
AWB
DAY＆
NIGHT
AUTO
D →N(AGC)
1-255 (168)
D →N(DELAY)
0-60 (5)
N →D(AGC)
1-255 (80)
N →D(DELAY)
0-60 (5)
RETURN
RET,SAVE & END
COLOR
B/W
BURST
ON, OFF (OFF)
IR SMART
OFF(Default)
ON
LEVEL
0-15 (3)
AREA
POSITION,
SIZE,RET,AGAIN
RETURN
RET,SAVE & END
RETURN
RET,SAVE & END
EXT (Default)
D →N(DELAY)
3-60 (3)
N →D(DELAY)
3-60 (3)
RETURN
RET,SAVE & END
NR
2DNR
OFF,MIDDLE、HIGH、LOW (LOW)
3DNR
OFF,MIDDLE、HIGH、LOW (LOW)
RETURN
RET,SAVE & END
SPECIAL
CAM TITLE
OFF (Default)
ON
0123456789
ABCDEFGHIJK

11
LMNOPQRSTUV
WXYZ▲→←↑↓( )
¯-_■/=&:~,.
←→ CLR POS END
D-EFFECT
FREEZE
OFF,ON (OFF)
MIRROR
OFF,MIRROR,V-FLIP,ROTATE (OFF)
NEG.IMAGE
OFF,ON (OFF)
RETURN
RET,SAVE & END
MOTION
OFF (Default)
ON
SELECT
AREA1,AREA2,AREA3,AREA4
(AREA1)
DISPLAY
ON
(Default)
POSITION,
SIZE,RET,AGAIN
OFF
SENSITIVITY
0-100 (64)
COLOR
GREEN,BLUE,WHITE,RED
(GREEN)
TRANS
0.00/1.00/0.75/0.25 (1.00)
ALARM
VIEW
TYPE
ALL,OFF, BLOCK,
OUTLINE (ALL)
OSD
VIEW
OFF,ON (ON)
ALARM
OUT
OFF,ON (ON)
TIME
1-15 (3)
RETURN
RET,SAVE & END
DEFAULT

RETURN
RET,SAVE & END
PRIVACY
OFF (Default)
ON
SELECT
AREA1,AREA2,AREA3,AREA4
(AREA1)
DISPLAY
OFF
MOSAIC
POSITION,
SIZE,RET,AGAIN
INV.
POSITION,
SIZE,RET,AGAIN
COLOR
(Default)
POSITION,
SIZE,RET,AGAIN
COLOR
WHITE,USER,BLACK,RED,

12
BLUE,YELLOW,GREEN,CYAN
(WHITE)
TRANS
1.00/0.25/0.50/0.75 (1.00)
DEFAULT

RETURN
RET,SAVE & END
LANGUAGE
HEB,ARB,ENG,CHN1,CHN2,GER,FRA,ITA,SPA,POL,RUS,POR,
NED,TUR,KOR, JPN (ENG)
DEFECT
LIVE DPC
OFF
ON (Default)
AGC
LEVEL
0-255 (70)
LEVEL
0-100 (50)
RETURN
RET,SAVE & END
WHITE DPC
OFF
ON (Default)
POS/SIZE
POSITION,
SIZE,RET,AGAIN
START
CLOSE THE IRIS
THEN
PRESS ENTER
DPC VIEW
ON, OFF (OFF)
LEVEL
0-60 (15)
AGC
0-14 (14)
SENS-UP
X2,X4,X6,X8,X10,
X15,X20,X25,X30
(X8)
RETURN
RET,SAVE & END
BLACK DPC
OFF (Default)
ON
POS/SIZE
POSITION,
SIZE,RET,AGAIN
START
PRESS ENTER
DPC VIEW
ON, OFF (OFF)
LEVEL
0-100 (100)
RETURN
RET,SAVE & END
RETURN
RET,SAVE & END
RS485
CAM ID
0-255 (0)
ID DISPLAY
ON, OFF (OFF)
BAUDRATE
2400,4800,9600,19200,38400 (38400)
RETURN
RET,SAVE & END

13
RETURN
RET,SAVE & END
ADJUST
SHARPNESS
OFF
AUTO
(Default)
LEVEL
0-10 (6)
START AGC
0~255 (70)
END AGC
0~255 (200)
RETURN
RET,SAVE & END
MONITOR
LCD (Default)
GAMMA
USER ,0.45,0.50,0.55,0.60,0.65,
0.70,0.75,0.80,0.85,0.90,0.95,
1.00 (USER)
BLUE GAIN
0~100 (50)
RED GAIN
0~100 (50)
RETURN
RET,SAVE & END
CRT
BLUE GAIN
0~100 (50)
RED GAIN
0~100 (50)
RETURN
RET,SAVE & END
LSD
ON, OFF (ON)
VIDEO. OUT
NTSC,PAL
RETURN
RET,SAVE & END
EXIT
SAVE & END,NOT SAVE,RESET（SAVE & END）

14
Connection
Bracket 1:
Step 1.
Lock the screws to fix the
bracket.
Step 2.
Make sure the connection is
tightened.
Step 3.
Lock the last screws to
install bracket completely.
※NOTICE : If necessary, please install 3 anchors before the
first step.

15
Bracket 2:
Step 1.
Lock the screw to fix the
camera.
Step 2.
Loosen the screw to adjust
the bracket.
Step 3.
Make sure the connection is
tightened.
Step 4.
Lock the screws to install
bracket completely.
※NOTICE : If necessary, please install 3 anchors before the
fourth step.

16
Connect BNC cable and power cable after installing bracket completely.
85-AAT067-A502G-A
BNC cable
Power cable