Hi Sharp HS-CW8301 User manual

Thankyou forpurchasing ourproduct.
Pleaseread thisUser sManualbefore
using theproduct. Change without Notice
WhiteLightLED+IR+Motion detected+PIR
3DFreeAngleCamera
Please readbeforeusing
1. Pleaseread the servicemanualindetailsbeforeusing.
2. Don'ttrytodisassemblethechassis ortheparteasily,incase
thattouchthe powerbymistake,is shocked byelectricitythe
dangerorcausedinside partstobe damaged ,
3. This product isa IP-65 waterproofcamera
4. Donotattempttoservicethisunityourselfunless you are
authorized todo so.Opening covermayexposureyou to
dangerousvoltage orotherhazards.Referall servicing to
qualified personnelonly.
5. When being regular,pleaselockthe partsfirmlyfirsttoprevent
the machine damage.
6. Pleaseconnectcorrectlyinaccordancewiththe regulation,
prevent the machinefromusing , orstriking improperly.
7. Pleasedon't useanyorganicsolution orthe corrosivelysanitizer
toinsert and wipeawaythe chassis outside . Whileinserting and
wipingaway, pleaseturnoffthepower, and usethecleanclothis
stained withletting asmallamountofbranchwater,insertand
wipeawayappearance.
8. Pleasedon'tusethe cameraunderthe following abominable
environments:Temperatureislowerthan -10 degrees
Centigrade, orishigherthan +50 degreesCentigrade.
3
SAFETYPRECAUTIONS
The lightning flashwitharrowhead symbol,withinan
equilateraltriangle,isintendedtoalertthe usertothe
presenceofinsulateddangerousVoltage withinthe
product senclosurethatmaybe sufficientmagnitude
toconstituterisk of electricalshocktopersons.
The exclamation pointwithinanequilateraltriangleis
intendedtoalerttheusertothepresenceof important
operation and maintenance(servicing)instructionsin
the literatureaccompanying theappliance.
FUNCTION
CONTENTTABLE
CONTENTTABLE…………………………………………………………….2
SAFETYPRECAUTIONS……………………………………..........……….3
FUNCTION…………………………………………………………………….4
SENSOR...…….…………………………………………………….4
LENS………………………………………………………………… 4
IR LENS…….……………………………………………………….. 4
PowerandVideo Output Jack…………………………………….5
INSTALL STEP.... ……………………………………………………………..7
SPECIFICATIONS…………………………………………………………….. 9
DIMENSION………………………………………………………………….. 10
IR &Whitelight active………………………………………………………….11
2
The cameraincludesautowhitebalancemode(AWB)，autocapture
colortemperature.The range is 2400°K~9400°K
SENSOR：AutoCell DeviceSensor, the IR LEDwouldon when night
comestomakeup lightness. IR LEDwouldnot on inthe day,
toreducepowerconsumption. Illumination is13 LUX(LED
on)/ 15LUX(LED off)
LENS：SupersensitivitysensorIRIS(BOARD LENS6.0mm)
IR LED：IR LED x12, angle35 / Whitelight LED x12, angle60
4
PIR SENSOR
LENS
WhitelightLED
IR LED
1. Intelligentcamerasupported motion detection systemwithwhite
light andIR LED
2. UnlikeothergeneralIR cameraswhichcan onlypresent B/W
image atnight, exclusivelydesign asamotion detection systemto
activatethe whitelight LEDwithin3M~7Mcameralensrange
distanceincolorimage, inthe otherhand whenIR is ON, shows
B/Wimage only.
3. Powersaving control, alsoitcan be an auxiliarylightingand
warningpurpose
D&N SENSOR

２．Set up detection mode:
StairsMode:
Set up: Press “SET”button on remotecontroller,
and then pressnumberbutton “1”.
The whitelight blinkonceafterpress “1”
Note: Userneedstopress “1”button after “SET”
In5seconds.Else, the settingiscancel
Detect range:
Application:
Indoor/ long distance/somewhereneed sensitivesensor.
Eg. : Stairs/ office/ factory/ inhouse
Surveillance Mode:
Set up: Press “SET”button on remotecontroller,
and then pressnumberbutton “2”.
The whitelight blinkonceafterpress “2”
Note: Userneedstopress “2”button after “SET”
In5seconds.Else, the settingiscancel
Detect range:
Application:
Outdoor,somewhereneed highaccuracysensor,within3Mdistance
Eg. : Corridor/ front door/ backdoor/ undertheroof
6
PIR DetectMode:
Set up: Press “SET”button on remotecontroller,
and then pressnumberbutton “3”.
The whitelight blinkonceafterpress “3”
Note: Userneedstopress “3”button after “SET”
In5seconds.Else, the settingiscancel
Detect range:
Application:
Indoor/ outdoor/ long distancesensor
Eg. : Corridor/ front door/ backdoor/ underthe roof / stairs/
office/ factory/ inhouse
Motion detectedMode
Set up: Press “SET”button on remotecontroller,
and then pressnumberbutton “4”.
The whitelight blinkonceafterpress “4”
Note: Userneedstopress “3”button after “SET”
In5seconds.Else, the settingiscancel
Detect range:
Application:
Indoor, Eg. : Stairs/ office/ factory/ inhouse
Powerand videooutput JACK：
DC JACKis forthe powerin, itisnecessarytouseaconstant
voltage adapter, F(BNC)JACKis forvideo input.
Setup
１． Pleaseset thedetect area
inthe centerof lensrange
5
7
8
IR trigger
If cameralocatedisaun-limitcondition,IR activewhen Luxislowerthan 13
IR closed when Luxis higherthan 15.
Whitelight trigger
According tothe cameradetection mode:
Mode1: StairsMode
Mode2:SurveillanceMode
Mode3:PIR Detect Mode
Mode4:Motion Mode
PIR detect condition：
１． The temperateobjectismoving fromoutsidecome intodetect range.
２． The temperateobject suchas “humans”, “cats”, “dogs”, willbe
detected. Moving carwithhigh temperaturewill alsobedetected.
Motion conditions
1.Withincameralensrange when Illumination darkorbright exchange
2.Withincameralensrange when anymoving object in3Mrange includes
people/ animals/ vehicles/ plantsmovement bythe wind / raining,etc.
3. Toavoidmotiondetection error, the motion systemis set tobe trigger
within2.5Mof an adult shape with minormovement, when motion is
between2.5-5M, itneedsbiggermovement totriggerthe detection.
Whitelight duration time
Inthe night, whitelightis activeif anymoving objectis undermotion detect.
Duration timeis 15 seconds; the duration will last 15 secondsforeach
motion detectionand will continue until the last motionisdetected
IR&Whitelightactive
3M
58
58
3M
7M
0.9M
0.9M
7M
4M
35
3M
58
Note:----linemeanswithinPIR detectrange.
Linemeansmotion detectrange.
DCJACK
DC 12VPowerIn
F(BNC)JACKVIDEO
VideoOutput
+ -
N.G OK

SPECIFICATION
11
IMAGESENSOR 1/3”COLOR CCD SENSOR INTERLINE
EffectivePixels NTSC:537(H)x505(V)
PAL:537(H)x597(V)
EffectivePixels NTSC:510(H)x492(V)
PAL:500(H)x582(V)
Synchronizingsystem 2：1Internal
Scanning system NTSC 525 lines/ 60 fields
PAL625 lines/ 50 fields
Video Output 1.0Vp-p/ 75 ohms composite
ElectronicShutter AutoElectronicShutter
(1/60~1/100000sec)NTSC, (1/50~1/100000sec)PAL
Lens BoardLens6.0mm,
HorizontalResolution 420 TVLines
S/NRation Morethan 48dB(AGC OFF)
MinimumIllumination 0.05 luxcolor
AutoWhiteBalance 2400°K~9400°K
Weatherproof IP65
IRDistance 15M(12pcs IR LED)
IRTrigger 13LUX/ 15LUXIR ON / OFF
Whitelight Distance <10M
Whitelight trigger 8LUX
Motiondetect range 3M
Motiondetect Light Change / picturechange
PIRdetect range 7M
PIRdetect temperature
X-Y-Z Position P-T-T(Pan-Tilt Twist)
PowerSupply ±10﹪DC12V/ 1A
PowerConsumption 3.１２W(Max)
Current260mA(Max)
Weight N.W./G.W.:0.66kg/ 0.815kg
Dimension 120mm x99.1mm
Operating Temp -10 to50(14 to122)℉
Storage Temp -12 to70 (-4to158 )℉
10
DIMENSION
1. Cameradetection will need30 second stostableinthe first timeplug in
power. At this time, pleasemakesureno peopleandheat arearound the
detected areasof camerarange. It can toavoidwrong detection.
2. The detection mode will be the Monitoring mode forfactorydefault.
3. Afteruseremotecontrollerset up mode type,camerawill auto
memorized the setting even if the powerfailurereopen.
4. The whitelight blinktimesdependson detectmode afterpoweron.
5. When setup tomotion detectmode,obviousand fastchangeof lightwill
switchon the whitelight, the equalresult ofdetectedactualmotion.
Therefore, baseon the actualenvironment toproperset up camerato
havebest resultwillbe suggested.
6. Remotecontrollerisoptional.
9
Camerainstallation
Optional
85
-
CW8301
-
A002G
-
B